Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
Spools, casting reels
-
Daiwa SLPW SV Boost dia32 22.5 12lb-80m G1 spool, Black 2025 New, for 24 Steez
SV Boost shallow spool for 24 Steez SV TW100 reels. This spool holds 0.285mm(JP12lb)-80m(90yds), as same as stock spool. 10g
$99.00 -
Daiwa SLPW RCSB SV 800S spool, Black, shallow
This shallow SV spool is to improve casting performance of Daiwa Alpahs SV 800 reels. Flat bottom, ultra light-weight 12g spool to improve casting performance especially for ultra light weight rigs 3g-7g 1/8-1/4oz. Casts great for heavier than 3g 1/8oz. 0.285mm(US10lb)-55m(60yds)
$74.00 -
Avail Microcast AMB5530C70'S spool Black, Old ABU 5500C 70's
Avail super shallow spool for old ABU 5500C reels in 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5500C sold in 80's or later. Difference is at the genuine spool, and 70's spool has silver plates on both sides, but 80's doesn't have them and it is black spool wall. 0.285mm-75m
$78.00 -
Avail Microcast OLD5550C70'S spool Red, Old ABU 5500C 70's
Avail shallow spool for old ABU 5500C reels in 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5500C sold in 80's or later. Difference is at the genuine spool, and 70's spool has silver plates on both sides, but 80's doesn't have them and it is black spool wall. 0.285mm-110m
$78.00 -
Avail Microcast AMB5050R-C spool Black, Old ABU 5000C 5001C
Avail shallow spool for old ABU 5000C 5001C reels in 60's and 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5000C with palming cup, 5000C with a little popping gear plate, 5000 with bronz bushing or 5500C high speed reels. 0.285mm-110m
$78.00 -
Daiwa SLPW RCSB MAG-Z Boost 1000 G1 spool, Silver 2022 Model
This spool extends casting distance by reducing brake force at the later half in casting. Fits to Daiwa 1000, 1012, 1025 and 1016 reels, T3(all models) and etc. Flat bottom, light-weight 15g spool to improve casting performance especially for relatively heavy rigs of 10g-28g 3/8-1oz. G1 grade duralumin. In MAGFORCE-Z Boost brake, rotor will pop out far only at the beginning of casting to prevent backlash, and then it retracts to the middle to reduce brake to add casting distance. The second half spring is 4 times stronger than the first half to do the trick. Compared to SV Boost spools, this Magforce-Z Boost spools have more weight, and it is more suitable for heavier rigs. You may cast long distance without fear of backlash with this spool. Casts great for heavier than 7g 1/4oz. 0.330mm(US12lb)-100m(110yds)
$96.00 -
Avail Microcast spool 22ALD22R for 22 Aldebaran BFS
Ultra light weight ultra shallow spool for Shimano 22 Aldebaran BFS for the ultimate finesse performance. You may easily cast from 1.5g with this spool. 2.2mm deep, 4.7g, line capacitiy 0.148mm(JP4lb)-57m, 0.165mm(JP6lb)-38m (genuine spool 6.7g, 0.235mm-45m) Please add magnets if you feel you need more brake force. Magnets are listed below of this page.
-
Avail Microcast AMB5030R-C spool Black, Old ABU 5000C 5001C
Avail super shallow spool for old ABU 5000C 5001C reels in 60's and 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5000C with palming cup, 5000C with a little popping gear plate, 5000 with bronz bushing or 5500C high speed reels. 0.285mm-75m
$78.00 -
Avail Microcast AMB5050R-C spool Silver, Old ABU 5000C 5001C
Avail shallow spool for old ABU 5000C 5001C reels in 60's and 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5000C with palming cup, 5000C with a little popping gear plate, 5000 with bronz bushing or 5500C high speed reels. 0.285mm-110m
$78.00 -
Avail Microcast spool 20MT24R, 20MT42R for 20 Metanium, 22 Metanium Shallow
Ultra light weight shallow spool for Shimano 20 Metanium and 22 Metanium Shallow for the ultimate finesse performance. 20MT24R, 2.4mm deep, 7.5g, line capacitiy 0.205mm-70m 20MT42R 4.2mm deep, 7.8g, line capacitiy 0.235mm-90m (genuine spool 14.1g, 0.285mm-100m) SVS Infinity brake holder is not coming with this spool, and please swap it from stock spool. Avail SVS Infinity Puller is useful to do the job. You may also use this spool with MB-20MT magnet brake system. Both are listed on this page below.
-
Daiwa SLPW RCSB SV Boost 1000 G1 spools Red and purple added
This spool extends casting distance by reducing brake force at the later half in casting. Fits to Daiwa 1000, 1012, 1025 and 1016 reels, T3(all models) and etc. Flat bottom, ultra light-weight 11g spool to improve casting performance especially for ultra light weight rigs 3g-7g 1/8-1/4oz. G1 grade duralumin. In SV Boost brake, rotor will pop out far only at the beginning of casting to prevent backlash, and then it retracts to the middle to reduce brake to add casting distance. The second half spring is 4 times stronger than first half to do the trick. Casts great for heavier than 3g 1/8oz. 0.330mm(US12lb)-80m(90yds)
-
Daiwa genuine, 1520 G1 Magforce-Z spool (Ryoga1520H #21)
G1 (air craft grade) duralumin spool for Daiwa 1500 sized reels. This genuine spool has moving brake rotor to automatically adjust brake force in casting. The brake system is great to prevent backlash for wide range of rigs. LIne capacity JP20lb(0.370mm, US14lb)-100m(110yds), g, 36mm dia.
$100.00 -
Daiwa SLPW, RCSB HD 1520 G1 spool
G1 (air craft grade) duralumin heavy duty spool for Daiwa 1500 sized reels. This HD spool has fixed brake rotor to emit stable brake force in casting. The brake is great for bulky rigs like swim baits, large deep divers and spinner baits. LIne capacity JP20lb(0.370mm, US14lb)-100m(110yds), 15g, 36mm dia.
$110.00 -
Daiwa Spool Holder for repair SV spool, 16Steez
This is the replacement spool holder on Daiwa SV reels and SV spools sold from 2013 to 2019. It is a cam at the brake rotor base, to push out the brake rotor when it is twisted by magnetic force. Its older version in black tend to get stuck with rotor cam, or to break in time at its very thin posts. This white one is reinforced parts to replace the black spool holder. Later than 2020 year model SV reels seem to have new black cam in better design. The C clip holding rotor may be removed by 2 flat head scerw drivers. You'll surely need a tweezers to set it back, to hold a washer in position and to set the C clip in the groove. C clip and a washer are pushed by a spring, and they jump out. Please take care.
-->$3.00 -
Daiwa SLPW RCSB HLC1516 G1 Hyper Long Cast spool
Fits to Daiwa 15XX bait casters, including Daiwa 15Zillion TW1516. It also fits to Daiwa 2006-2009Zillion TWS100 export reels. This spool is to cast the longest for heavier than 1/2oz rigs. The brake rotor spring is 4 times stronger than regular spools, making it emitting far less brake force than regular spools. G1 duralumin material is employed. Spool dia 36mm, weight 14g, 0.330mm(JP16lb, US14lb)-100m(110yds).
$92.00 -
Avail Macro Cast spool 16ALD15R spool for 16AldebaranBFS
Ultra light weight spool for Shimano16Aldebaran BFS XG (magnet brake model) for the ultimate finesse performance.
16ALD15R spool, 1.5mm deep, 4.9g, (genuine spool 7.7g) Line capacitiy 0.205mm-35m, 0.165mm-45m (Genuine spool 0.235mm-45m)
8pcs of additional neodium magnets, sold separately, are required to use this spool. The shallow spool is far from brake system, and you need to add these 1mm thick magnets to compensate the decreased brake force. -
Roro BFS Spool DIY X27, Gold, Daiwa TW1000, TD-Z
You may cast 3g. Ultra light weight 3.5mm deep super shallow tuning spool for Daiwa TW 1000 series reels, and TD-Z reels. Steez SV TW, Zillion SV TW, 17Steez A, Steez 100, Zillion, T3 except T3 Air, Ryoga 1016, Pluton 1016, Zillion 1016, TD-Z103, SS SV and etc. 34mm dia. 4.6g(measured without ball bearing) SIC ball is installed at the end of titanium shaft to remove friction. Fixed brake rotor offer stable brake. PE#1.0(0.18mm)-120m
$87.00 -
21 Steez A TW HLC mild spool
This modified Magforce Z Boost spool has 0.8mm longer brake rotor installed to emit more brake force than stock spool, and you may cast from 14g 1/2oz easy and long. Fits to Daiwa 21/22 Steez A TW HLC reels.
$120.00 -
Roro BFS Spool DIY CB26 Gold, Shimano 21 SLX BFS, Curado BFS
You may cast 3g. Ultra light weight 3mm deep super shallow tuning spool for Shimano 17Scorpion BFS, 21 SLX BFS, 21Curado BFS. CNC machined ESD extra strong duralumin spool with titanium center shaft. 32mm dia. 4.97g. Stock spool weights are Scorpion BFS spool 8.9g, SLX BFS 9.2g. Not for 17Conquest BFS or 16Aldebaran BFS. Please insert pinion peek bar accompanied to pinion gear.
$85.00 -
Avail Microcast BTM1039R-MAG spool, Black
Ultra light weight spool for Shimano Bantam 100SG MAG cast reels. Fits to 10SG with brake drum model as well. 13.3g (stock 23.7g)
$92.00 -
Avail Microcast Spool 22BTM33R, 22BTM58R 22 Bantam
22 Bantam reels. Please swap the SVS Infinity brake holder from stock spool, using SVS puller 6P listed on the product page. Ultra light weight spools, 7.8g of 33R, 8.8g of 58R instead of 12.1g of stock spool, accelerate fast with light rigs. 33R 3.3mm deep, 0.285mm-65m/72yds, fine for 5g 3/16oz or heavier 58R 5.8mm deep, 0.310mm-75m/83yds, fine for 7g 1/4oz or heavier
-
Avail Microcast Spool 19ANT41R
Fits to Shimano 19Antares reels. 4.1mm shallow spool weighs at 7.5g, instead of 10.9g of stock spool. The ultra light spool accelerate fast with light rigs of 3.5g well. You will swap the SVS brake holder from stock spool using Avail SVS puller Infinity. Or, use with magnet brake MB-19ANT listed below of the product page.
$87.00 -
Avail 20Metanium Custom kit, JP-20MT-CSTM-KIT-24R, blue
Fits to 20 Metanium, 22 Metanium Shallow, and 23 Metnaium 100 reels. 2.4mm super shallow spool, aluminum star drag, spool tension cap, level winder guide bar and dial back plate in blue color. 20MT24R spool weighs at 7.5g, instead of 11.3g of stock spool. The ultra light spool accelerate fast with light rigs of 3.5g well. You will swap the SVS brake holder from stock spool using Avail SVS puller Infinity. Or, use with magnet brake 20MT. Line capacity PE#0.8-120m, 0.205mm-70m
$100.00 -
Avail Microcast SXUM1618R spool for ABU Morrum SX1600C ULTRAMAG
ABU Morrum SX1600C ULTRAMAG Super light weight 7.2g (14.5g genuine spool), extra strong duralumin spool PE#0.6(0.15mm)-80m. Casts great for heavier than 3.5gram, 1/8oz
$87.00
