Menu 

Avail Microcast Spool AMB2518TR finesse spool + 4pt brake

ABU 2500C, 2501C, 2600C, 2601C Extreme light weight 5.8g, machined ESD(extra strong duralumin, air craft grade duralumin) spool Casts great for heavier than 2.0g, example: 20m for 2.0g 0.235mm-50m 4pt brake holder installed, You may use Avail Magnet brake 2518 with this spool.

Avail Microcast spools 16SCP7020RI 7040RI  16Scorpion70/71 Curado70/71

Shimano 16Scorpion70/71 Curado70/71(year 2016- model) Please swap SVS infinity brake holder from stock spool to this spool. New SVS Infinity puller tool is listed on this page at the bottom. Work also with Magnet brake Avail MB-SCP16. Great for 3g for 7020, 3.5g for 7040.

7020 Super shallow spool, 2.0mm deep, 0.235mm-45m/50yds, 9.7g

7040 shallow spool, 4.0mm deep, 0.285mm-60m/65yds, 10.2g

Avail SVS 4 Puller white 2014-2015

You may easily remove SVS infiniti 4 brake holder from Shimano spools with this tool. Brake blocks are red for this model. Shimano 14Scorpion 200, 14Chromarch Ci4+, 14Calcutta Conquest, 15Aldebaran, 15Curado 200, 15Curado 200i and etc, SVS 4pt Infinite model.

Daiwa Zillion PE special 7.9R Spool Red

Daiwa 08TD-Zillion, 09/12TD-Zillion PE Special, 04TD-Z100 US Trail, 05TD-Z BBS, 21 Steez A HLC
Flat bottom shallow spool to improve casting distance by about 20%. Super Light weight 13.8g. 0.310mm(US12lb)-100m(110yds). Magforce-Z brake. This is the spool to improve 09Zillion reels in casting light rigs of 1/4-3/8oz. Zillion stock spool weight 21g.

Daiwa Zillion HLC spool spring

Fits to Daiwa 08Zillion, 09Zillion PE special and etc with Magforce Z brake system. This is the strong rotor spring employed to 09Zillion HLC hyper long cast reel spools. It is 4 times stronger than stock 08Zillion spools. With this HLC spring, spool will spin at twice the speed as stock spools at maximum, to cast 80-100yds with 1/2-1oz rigs.

Spool bearing installation service

This is the fee to install bearings onto spools. This service is only for customers who purchase bearing and spool together. Bearings on short shaft model, like Daiwa, Revo (except Gen 1 S and ST) requires to use pin remover, and this service is to do it for you. For long spool shaft reels like Shimanos, you don't have to replace the bearing on the shaft because it is not related to casting performances. It is to support shaft in case very large load is applied. For those reels please replace the two bearings at the both ends of spool shafts.

Daiwa SLPW RCSB HLC1514 G1 Hyper Long Cast spool

Fits to Daiwa 15XX bait casters, including Daiwa 15Zillion TW1516. It also fits to Daiwa Zillion TWS100 export reels. This spool is to cast the longest for heavier than 1/2oz rigs. The brake rotor spring is 4 times stronger than regular spools, making it emitting far less brake force than regular spools. G1 duralumin material is employed. Spool dia 36mm, weight 14g, 0.310mm(US12lb)-100m(110yds).

Avail Microcast spools 14CNQ1024RI  14Conquest 100/101

Shimano Calcutta 14Conquest 100/101/100HG/101HG (year 2014-,2015- model) No brake holder included. Please use SVS from original spool, and Avail SVS puller 4 in white is helpful.. Work with Magnet brake Avail ALD15, and you may adjust magnet brake with the dial. Casts great for heavier than 4g. 0.235mm-65m/70yds 10.2g You may use this spool with Avail magnet brake ALD15

Avail Microcast AMB4550UC2 finesse spools

ABU 4500C, 4600C Ultra Cast model (spool shaft separates from spool body). Not fitting to low profile Ultra Mag in 80's like XLT. Super light weight 9.8g, instead of 15.1g of stock spool. Extra strong duralumin spool. 4530UC2 0.235mm(US6lb)-50m/55yds 4550UC2 0.31mm(US12lb)-60m/70yds Please use the small parts (2 ball bearings, a washer, brake holder and white spool gear) from stock spool or sold below separately. Casts great from heavier than 4g