Megabass Zonda series reels, Daiwa Alphas 103/105, Sol 103.
Casts great for heavier than 4g.
Fixed brake rotor. Ultra light 10g, 0.285mm(10lb)-/80m(90yds)
Avail shallow spool for old ABU 4500C, 4600C reels sold in 70's. 1976-78 4500C, and 1978 4600C with red thumb bars. Does not fit to other 4500 with bronze bushing reels, 4600CB or replica 4500C models sold later. 0.285mm-70m
ABU 1500C, 1600C, 1601C
Super light weight 7.6g, titanium shaft, ESD spool
0.205mm(JP6lb nylon)-45yds/40m
Casts great for heavier than 2.0g, example: 20m for 2.0g, You may use AMB1520 Mag Brake with this spool.
ABU 1500C, 1600C, 1601C
Super light weight 7.5g, titanium shaft, ESD spool
0.235mm(JP8lb nylon)-65yds/60m Casts great from 4g, You may use AMB1520 Mag Brake with this spool.
Old Shimano Bantam 200, 200SG, 20SG and etc, only for centrifugal brake models.
0.28mm-70m/80yds 11.5g (stock 22g), improve casting performances, great from 5g to cast.
Daiwa T3, T3 MX, T3 ballistic, RCS 1016, 1025 reels (Ryoga, Pluton). Flat bottom, super light-weight spool to improve casting performance for wide range or weight. MAGFORCE-Z brake. Casts great for heavier than 7g.
0.285mm(US10lb)-100m(110yds), 14g
Shimano Curado 100B, 100D, Chronarch 50 MG
4pt brake holder installed. You may add at least 30% distance with 1/4-3/8oz rigs with this tuning spool.
Casts great for heavier than 4g 1/8oz
0.28mm(US10lb)-80m(90yds) 9.6g.
18 Bantam MGL 150. Please swap the SVS Infinity brake holder from stock spool, using SVS puller listed on the page of this spool.
36RI 3.6mm deep spool, 0.285mm-60m/70yds, 11.7g fine for 5g 3/16oz
58RI 5.8mm deep spool, 0.370mm-60m/70yds, 12.2g fine for 7g 1/4oz
Old Shimano Bantam 100, 100SG, 10SG and etc only for centrifugal brake models. not for 100EX.
0.26mm-65m/70yds 10.8g (stock 20g) Improve casting performances drastically especially for light rigs. Casts great for heavier than 4g rigs.
Avail shallow spool for old ABU 5500C reels in 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5500C sold in 80's or later. Difference is at the genuine spool, and 70's spool has silver plates on both sides, but 80's doesn't have them and it is black spool wall. 0.285mm-110m
Shimano Calcutta 14Conquest 100 (year 2014-,2015- model)
No brake holder included. Please use SVS from original spool, and Avail SVS puller is helpful to remove SVS. Casts great for heavier than 4g.
0.33mm-90m/100yds 9.8g
Shimano Calcutta 14Conquest 100/101/100HG/101HG (year 2014-,2015- model)
No brake holder included. Please use SVS from original spool, and Avail SVS puller 4 in white is helpful..
Work with Magnet brake Avail ALD15, and you may adjust magnet brake with the dial. Casts great for heavier than 4g.
0.235mm-65m/70yds 10.2g
You may use this spool with Avail magnet brake ALD15
Shimano 16Scorpion70/71 Curado70/71(year 2016- model) Please swap SVS infinity brake holder from stock spool to this spool. New SVS Infinity puller tool is listed on this page at the bottom. Work also with Magnet brake Avail MB-SCP16. Great for 3g for 7020, 3.5g for 7040.
7020 Super shallow spool, 2.0mm deep, 0.235mm-45m/50yds, 9.7g
Daiwa 06TD-Zillion, 08/12TD-Zillion PE Special, 04TD-Z 100 US Trail, 05TD-Z BBS
This is the spool on 07TD-Zillion HLC Hyper Long Cast models, to cast heavier than 1/2oz rigs the longest. Its brake spring is 4 times stronger than regular Zillion spools, to emit far less brake than regular spools, allowing heavy rigs to cast 30% more for around 3/4-1oz plastic worm rigs.
Spool body (rotating part) is machined to reduce weight by 30%. Weight 15.1g including bearings, 16lb(0.330mm) -110yds
ABU 2500C, 2501C, 2600C, 2601C
Extreme light weight 5.8g, machined ESD(extra strong duralumin, air craft grade duralumin) spool
Casts great for heavier than 2.0g, example: 20m for 2.0g
0.235mm-50m
4pt brake holder installed,
You may use Avail Magnet brake 2518 with this spool.
G1 grade Extra strong duralumin spool with SV MAGFORCE-AIR brake. You may cast from 3g 1/8oz to heavy rigs with this spool without backlash easily. Flat bottom, ultra light-weight 9g spool to improve casting performance especially for ultra light weight rigs 3g-7g 1/8-1/4oz. Fits to Daiwa T3(all models), all 10XX sized Daiwa bait casters like Zillion1016TW, Steez1016TW, Steez A1016, Ryoga1025, Pluton1025 and etc.
1012 G1 spool 0.310mm(US10lb)-70m(80yds)
1016 G1 spool 0.330mm(US12lb)-100m(110yds)
You may easily remove New SVS Infinity brake holder from Shimano spools with this tool. Fitting to Shimano New SVS Infinity with white brake blocks, later than 2016 models of Shimano. 16Metanium MGL, 16Scorpion70, 17ChronarchMGL, 18AldebaranMGL, 18Bnatam MGL, 20 Metanium and etc. Doesn't fit to the SVS Infinity with red brake blocks.
Daiwa T3(all models), Zillion1016TW, Steez1016TW, Steez A1016, Ryoga1025, Pluton1025 and etc. Flat bottom, light-weight 13g spool to add casting distance by the help of Magforce-Z brake system especially for light weight rigs 7g-14g 1/4-1/2oz. G1 drage Extra strong duralumin spool. MAGFORCE-Z brake. Casts great for heavier than 7g 1/4oz.
1012 G1 spool 0.285mm(US10lb)-100m(110yds)
1016 G1 spool 0.330mm(US12lb)-100m(110yds)
These are tuning spools for Shimano 17Conquest BFS reels.
17CNQ15R spool is to upgrade casting performance for light, rigs in 3-5g. Spool weight 5.1g. Please add 4pcs of 1mm thick neodim magnets listed on this page or brake will be too little.
17CNQ29R spool is a deeper spool with 50% more line capacity than stock spool. 5.3g (genuine spool 7.9g)
Line capacities
Genuine spool 0.235mm-45m
17CNQ15R(1.5mm deep spool) 0.165mm-45m, 0.205mm-35m
17CNQ29R(2.9mm deep spool) 0.235mm-60m, 0.260mm-50m, 0.285mm-40m