Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
-
- Spools, casting reels (65)
- Handles, casting reels (66)
- Handle knobs (60)
- Gears, brakes, level winders (78)
- Ball bearings, Pin remover (7)
- Spools, spinning reels (26)
- Handles, spinning reels (12)
- Frames, plates, star drag, colored parts (32)
- Drag washers (30)
Tuning Parts
-
Daiwa genuine, 1520 G1 Magforce-Z spool (Ryoga1520H #21)
G1 (air craft grade) duralumin spool for Daiwa 1500 sized reels. This genuine spool has moving brake rotor to automatically adjust brake force in casting. The brake system is great to prevent backlash for wide range of rigs. Line capacity JP20lb(0.370mm, US14lb)-100m(110yds), g, 36mm dia.
$100.00 -
ValleyHill Mechanical Brake cap set
Mechanial brake cap set for old ABU Ambassadeur reels, 4000-6000. Flanged cap make your ABUs look better.
$18.00 -
IOS Factory SD connect, left
This is the connector to be used with Daiwa handles to fit to Shimano reels. Daiwa RCS screw-in handle 35-60mm left handle, Shimano screw-in body reel 1000-3000. Left handle only. No right handle model is offered at this moment.
$15.00 -
DRT Varial Calform knob, Silver
Ultra light weight EVA knob. By installing this Calform knob for 2pcs, your Varial 100 handle will be removed weight by 20g. Rim design is from forged aluminum wheels from US. Design disc is in it, to be modified later. Fitting, Shimano A, Daiwa S. 1pc in a package.
$56.00 -
Daiwa SLPW RCSB SV Boost 1000 G1 spools Red and purple added
This spool extends casting distance by reducing brake force at the later half in casting. Fits to Daiwa 1000, 1012, 1025 and 1016 reels, T3(all models) and etc. Flat bottom, ultra light-weight 11g spool to improve casting performance especially for ultra light weight rigs 3g-7g 1/8-1/4oz. G1 grade duralumin. In SV Boost brake, rotor will pop out far only at the beginning of casting to prevent backlash, and then it retracts to the middle to reduce brake to add casting distance. The second half spring is 4 times stronger than first half to do the trick. Casts great for heavier than 3g 1/8oz. 0.330mm(US12lb)-80m(90yds)
-
Avail 2500C high speed gear set HGST Type2, 6.1:1 gear for ABU 1500 2500 series Smoother, easier clutch off
6.1:1 Super high speed gear set forABU Classic 1500C and 2500C series reels. 2 sets are offered for 1500/2500C, brass gear set and duralumin drive gear set. Pinion is made of brass for both. 57cm/ handle turn. Please set drag at lower than 1kg force. Suitable for up to 8lb mono. Kit includes main gear, pinion gear and two "High Speed 6.1" stickers. NOT for Morrum, SM or BM series 1600C or 1601C. These gear sets are only for classic Ambassadeur with two cast control caps on both side cups. 75S, A7075 air craft grade duralumin drive gear removes weight by 8.6g.
-
Avail Magnet brake MB-20MT
This is the magnet brake system working with Avail 20MT24R and 20MT42R spools for Shimano 20 Metanium. You may adjust the brake strength by the dial of reel. To install the magnet brake, please check here How to install magnet brake. It will not work with genuine spool of the Metanium.
$21.00 -
Avail Microcast spool 20MT24R, 20MT42R for 20/22/23 Metanium
Ultra light weight shallow spool for Shimano 20/22/23 Metanium Japan, and 2020 Metanium USA for the ultimate finesse performance. 20MT24R, 2.4mm deep, 7.5g, line capacitiy 0.205mm-70m 20MT42R 4.2mm deep, 7.8g, line capacitiy 0.235mm-90m (genuine spool 14.1g, 0.285mm-100m) SVS Infinity brake holder is not coming with this spool, and please swap it from stock spool. Avail SVS Infinity Puller is useful to do the job. You may also use this spool with MB-20MT magnet brake system. Both are listed on this page below.
-
Avail Microcast AMB5030R-C spool Black, Old ABU 5000C 5001C
Avail super shallow spool for old ABU 5000C 5001C reels in 60's and 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5000C with palming cup, 5000C with a little popping gear plate, 5000 with bronz bushing or 5500C high speed reels. 0.285mm-75m
$70.00 -
Avail ESD Brake Plate 2500C IAR, Chrome
ABU 2500C AIR model compatible brake plate (gear side plate) to remove weight by about half. 16.4g (genuine 33g) Made by ESD, extra strong duralumin.
$93.00 -
Avail ESD Palming Plate 2500C, Chrome
ABU 2500C compatible palming plate (palming side plate) to remove weight by about 1g. 9.2g (genuine 10.2g) Made by ESD, extra strong duralumin.
$31.00 -
G-nius BHK, bait-casting reel hook keeper
To be attached on a bait casting reel, this BHK works as a hook keeper. Please remove a screw at lower front side, and fasten it together with this BHK.
$4.00 -
Avail Microcast spool 22ALD22R for 22 Aldebaran BFS
Ultra light weight ultra shallow spool for Shimano 22 Aldebaran BFS for the ultimate finesse performance. You may easily cast from 1.5g with this spool. 2.2mm deep, 4.7g, line capacitiy 0.148mm(JP4lb)-57m, 0.165mm(JP6lb)-38m (genuine spool 6.7g, 0.235mm-45m) Please add magnets if you feel you need more brake force. Magnets are listed below of this page.
-
Norikura International Karin wood knob for Cardinal 3 Limited offered!
Burled Karin wood knob for Cardinal 3 and 33. Body is lightly twisted to fit perfect with fingers. Crafted in Hida Japan.
$41.00 -
Daiwa SLPW RCSB MAG-Z Boost 1000 G1 spool, Silver 2022 Model
This spool extends casting distance by reducing brake force at the later half in casting. Fits to Daiwa 1000, 1012, 1025 and 1016 reels, T3(all models) and etc. Flat bottom, light-weight 15g spool to improve casting performance especially for relatively heavy rigs of 10g-28g 3/8-1oz. G1 grade duralumin. In MAGFORCE-Z Boost brake, rotor will pop out far only at the beginning of casting to prevent backlash, and then it retracts to the middle to reduce brake to add casting distance. The second half spring is 4 times stronger than the first half to do the trick. Compared to SV Boost spools, this Magforce-Z Boost spools have more weight, and it is more suitable for heavier rigs. You may cast long distance without fear of backlash with this spool. Casts great for heavier than 7g 1/4oz. 0.330mm(US12lb)-100m(110yds)
$96.00 -
Daiwa SLPW I shape cork knob Super High Grip
Soft rubber surface coated cork knob. Cap is in orange to be identified easily. 5g.
Fitting: Daiwa S All bait casters, except large conventional reels$14.50 -
Avail Microcast AMB5050R spool Silver, Old ABU 5000 5000D bronze bushing reel
Avail shallow spool for old ABU 5000 5000D reels in '70s, with bronze bushings. Does not fit to 5000C with ball bearing or 5500C high speed reels. 0.285mm-110m
$70.00 -
Daiwa SLPW EX LT 2500S spool2
Machined aluminum spool, with CRBB ball bearing installed inside for smooth drag. ATD-Type-L drag system for better release of lines. Daiwa 18/22Exist, 19/24Certate, 21Luvias Airity, 23Airity(PCLT2500, LT2500, FCLT2500) Line capacity 6lb(0.20mm)-100m(110yds) 26g, 5kg drag
$127.00 -
Daiwa SLPW EX LT 3000S spool2
Machined aluminum spool, with CRBB ball bearing installed inside for smooth drag. ATD-Type-L drag system for better release of lines. Long-cast ABS design, perfect line stopper, Titanium spool ring. Daiwa 23Airity, 18/22Exist, 1924Certate, 21Luvias Airity (PC LT3000, LT3000, 3000C) Line capacity 8lb(0.23mm)-100m(110yds), 6lb(0.20mm)-150m(165y), 29g, 10kg drag
$131.00 -
Daiwa SLPW EX LT 4000S spool2
Machined aluminum spool, with CRBB ball bearing installed inside for smooth drag. ATD-Type-L drag system for better release of lines. Long-cast ABS design, perfect line stopper, Titanium spool ring. Daiwa 18/22Exist, 19/24Certate, 21Luvias Airity, 23Airity (LT4000, 5000) Line capacity 12lb(0.285mm)-100m(110yds), 8lb(0.235mm)-150m(165y), 34g, 10kg drag
$135.00 -
Daiwa SLPW EX LT 5000S spool2
Machined aluminum spool, with CRBB ball bearing installed inside for smooth drag. ATD-Type-L drag system for better release of lines. Daiwa 18/22Exist, 19/24Certate, 21Luvias Airity, 23Airity (LT4000, 5000) Line capacity 14lb(0.310mm)-130m(150yds), 10lb(0.265mm)-190m(210y), 39g, 12kg drag
$135.00 -
Daiwa SLPW 22RCS Machine-cut Light Handle 40mm
Solid machine-cut handle. Fits to Daiwa reels with no hex handle shaft, Exist, Steez, Certate, Bradia, '07- Luvias, Fuego and etc 1000-2004 size. Comes with 2 CRBB 4x7x2.5 ball bearings and washers. Fits with Daiwa S knobs.
$53.00 -
Daiwa SLPW 22RCS Machine-cut Light Handle 55mm
Solid machine-cut handle. Fits to Daiwa reels with no hex handle shaft, Exist, Steez, Certate, Bradia, '07- Luvias, Fuego and etc 2000-RCS4000, LT5000 size. Comes with 2 CRBB 4x7x2.5 ball bearings and washers. Fits with Daiwa S knobs.
$56.00 -
Daiwa SLPW 22RCS Machine-cut Light Handle 60mm
Solid machine-cut handle. Fits to Daiwa reels with no hex handle shaft, Exist, Steez, Certate, Bradia, '07- Luvias, Fuego and etc 2000-RCS4000, LT5000 size. Comes with 2 CRBB 4x7x2.5 ball bearings and washers. Fits with Daiwa S knobs.
$56.00
