Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
-
- Spools, casting reels (65)
- Handles, casting reels (66)
- Handle knobs (60)
- Gears, brakes, level winders (78)
- Ball bearings, Pin remover (7)
- Spools, spinning reels (26)
- Handles, spinning reels (12)
- Frames, plates, star drag, colored parts (32)
- Drag washers (30)
Tuning Parts
-
Daiwa SLPW 22RCS Machine-cut Light Handle 90mm Double pad
Solid machine-cut handle. Fits to Daiwa reels with no hex handle shaft, Exist, Steez, Certate, Bradia, '07- Luvias, Fuego and etc 2000-RCS4000, LT5000 size. Comes with 4 CRBB 4x7x2.5 ball bearings and washers. Fits with 2 Daiwa S knobs.
$73.00 -
Norikura International Karin wood spool bumper for Cardinal 3 Limited offered!
Burled Karin wood spool bumper for Cardinal 3 and 33. This is only for reproduction spool, made of plastic. To be fit with tack tapes or glues to the spools. Crafted in Hida Japan.
-->
$42.00 -
Avail Microcast OLD5550C70'S spool Red, Old ABU 5500C 70's
Avail shallow spool for old ABU 5500C reels in 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5500C sold in 80's or later. Difference is at the genuine spool, and 70's spool has silver plates on both sides, but 80's doesn't have them and it is black spool wall. 0.285mm-110m
$70.00 -
Avail Microcast AMB5530C70'S spool Black, Old ABU 5500C 70's
Avail super shallow spool for old ABU 5500C reels in 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5500C sold in 80's or later. Difference is at the genuine spool, and 70's spool has silver plates on both sides, but 80's doesn't have them and it is black spool wall. 0.285mm-75m
$70.00 -
Norikura International Karin Wood Side Plate for Cardinal 3 Limited offer
This is the wood side plate for Cardinal 3 and 33 of later reproduction models. Not fitting to old models of 1960's. The side plate is made of burled Karin. Crafted in Hida Japan.
$71.00 -
Daiwa SLPW RCSB SV 800S spool, Black, shallow
This shallow SV spool is to improve casting performance of Daiwa Alpahs SV 800 reels. Flat bottom, ultra light-weight 12g spool to improve casting performance especially for ultra light weight rigs 3g-7g 1/8-1/4oz. Casts great for heavier than 3g 1/8oz. 0.285mm(US10lb)-55m(60yds)
$74.00 -
Daiwa SLPW EX LT 2500 spool2
Machined aluminum spool, with CRBB ball bearing installed inside for smooth drag. ATD-Type-L drag system for better release of lines. Daiwa 18/22Exist, 19/24Certate, 21Luvias Airity, 23Airity(PCLT2500, LT2500) (Not recommended to FC LT2500 due to souped up drag might damage reel gear) Line capacity 6lb(0.20mm)-150m(165yds) 28g, 10kg drag
$127.00 -
Avail ESD Brake Plate 2500C IAR, Black
ABU 2500C AIR model compatible brake plate (gear side plate) to remove weight by about half. 16.4g (genuine 33g) Made by ESD, extra strong duralumin.
$93.00 -
Daiwa 21 Steez A TW HLC mild brake kit
This is the brake tuning kit to make casting easier for Daiwa 21/22 Steez A TW HLC reels. This brake rotor is 0.8mm longer than that of HLC reels, to emit more brake. With this kit, I am able to cast 14g 1/2oz rigs easy, and still cast long with 1oz rigs. Kit includes purple brake rotor and 2 springs. Please replace these of your HLC spools. Chrome soft spring should be set at bottom, and gunmetal stronger spring should sit above silver sleeve. You will surely need bent tweezers, fine pliers and flat head drivers to swap these parts on the spool.
$20.00 -
21 Steez A TW HLC mild spool
This modified Magforce Z Boost spool has 0.8mm longer brake rotor installed to emit more brake force than stock spool, and you may cast from 14g 1/2oz easy and long. Fits to Daiwa 21/22 Steez A TW HLC reels.
$120.00 -
Daiwa 23 Steez A2 HLC Boost brake kit
This is the brake tuning kit to make Mag-Z Boost reels into HLC, Hyper Long Casting. Brake rotor is 0.8mm shorter than stock rotor, with about 4 times harder springs, to emit less brake to add distance. Kit includes purple brake rotor and 2 springs. Please replace these of your reel spools. Fits to Daiwa 22 Zillion TW HD, 23 Steez A2 TW reels. You will surely need bent tweezers to swap these parts, when you set C clip back.
$15.00 -
DRT Varial Calform Wheel Cap, Black and Silver
Knob center cap for Varial 95mm, 100mm handles. The same cap as that of DRT Calform knobs. With this cap, you may install regular Slim and Fat knobs to 87mm, 110mm and 117mm handles.
$31.00 -
Smoooooth Drag Carbontex Drag kit Daiwa bait casters #3
Ultra smooth carbontex drag washers. Set of 3 washers. Fits the following reels: TD-S 100HSD, 103HSD/PSD, TD-X100HSD, 103HSD, PR103HSD, PC103HSD
$8.00 -
Norikura International Karin wood drag knob for Cardinal 3 Limited offered!
Burled Karin wood drag knob for Cardinal 3 and 33. Crafted in Hida Japan.
-->$58.00 -
Daiwa SLPW RCSB SV Boost PE 1000 G1 spool
This shallow spool has SV Boost brake specifically tuned to be used with PE braided lines of thinner than #0.8. It Flat bottom, ultra light-weight 11g spool to improve casting performance. Made of G1 grade duralumin. In the SV-Boost brake, rotor will pop out far only at the beginning of casting to prevent backlash, and then it retracts to the middle to reduce brake to add casting distance. The second half spring is 4 times stronger than first half to do the trick. Casts great for heavier than 3g 1/8oz. PE0.8-150m, 0.285mm(US10lb)-70m(80yds)
-->$107.00 -
Daiwa SLPW RCSB SV Boost 1000S G1 shallow spools Red and purple added
This shallow SV spool extends casting distance by reducing brake force at the later half in casting. Fits to Daiwa 1000, 1012, 1025 and 1016 reels, T3(all models) and etc. Flat bottom, ultra light-weight 11g spool to improve casting performance especially for ultra light weight rigs 3g-7g 1/8-1/4oz. G1 grade duralumin. In SV Boost brake, rotor will pop out far only at the beginning of casting to prevent backlash, and then it retracts to the middle to reduce brake to add casting distance. The second half spring is 4 times stronger than first half to do the trick. Casts great for heavier than 3g 1/8oz. 0.285mm(US10lb)-70m(80yds)
-
Daiwa SLPW EX LT 3000 spool2
Machined aluminum spool, with CRBB ball bearing installed inside for smooth drag. ATD-Type-L drag system for better release of lines. Long-cast ABS design, perfect line stopper, Titanium spool ring. Daiwa 18/22Exist, 19/24Certate, 21Luvias Airity, 23Airity (PC LT3000, LT3000, 3000C) Line capacity 8lb(0.23mm)-150m(165yds), PE#1(0.18mm)-200m(220y), 29g, 10kg drag
$131.00 -
Daiwa SLPW EX LT 3000D spool2
Machined aluminum spool, with CRBB ball bearing installed inside for smooth drag. ATD-Type-L drag system for better release of lines. Long-cast ABS design, perfect line stopper, Titanium spool ring. Daiwa 23Airity, 18/22 Exist, 19/24Certate, 21Luvias Airity (PC LT3000, LT3000, 3000C) Line capacity 12lb(0.285mm)-200m(220yds), PE#1.5(0.23mm)-300m(220y), 30g, 10kg drag
$131.00 -
Daiwa SLPW EX LT 4000D spool2
Machined aluminum spool, with CRBB ball bearing installed inside for smooth drag. ATD-Type-L drag system for better release of lines. Long-cast ABS design, perfect line stopper, Titanium spool ring. Daiwa 18/22Exist, 19/24Certate, 21Luvias Airity, 23Airity (LT4000, 5000) only. Line capacity 14lb(0.310mm)-230m(260yds), PE#2(0.255mm)-300m(330y), 34g, 10kg drag
$135.00 -
Shimano Yumeya 21 Ultra Strong Handle 48 (96mm) BH-1 7mm fit
Custom sway back handle for Shimano 50-250 sized reels, like Antares, Metanium, Scorpion and etc. Large grips offer ultimate power in cranking. 96mm swept, aluminum frame. Comes with a retainer, screw, and two M7 center nuts for R and L.
-->$90.00 -
Shimano knob S, Shimano A (22slxdcxt)
Flat, soft rubber knob for Shimano bait casters 70-200 size, and spinning 1000-C3000 size. 5g Fitting: Shimano A
$12.00 -
Mike's Reel Repair Rocket Braking System, 22567KIT
Ambassadeur Rocket Braking System This kit includes a genuine Rocket clutch washer and 2 Rocket brake blocks....some of the tiniest around! This kit will enable your Abu to spin up much faster and hold a faster spool speed while casting. Only question is.....are you up for the speed?? Kit fits all Abu Ultracast reels with original 2pt brake, clutch washer number 19372. You may also replace 1126727 6pt brake by purchasing C clip wire 13084.
$3.00 -
Daiwa SLPW RCSB MAG-Z Boost 1000S G1 spool, Silver
This spool is to be used both to cast long, and pitch well. This is a little shallower than Mag-Z Boost 1000 spool. It extends casting distance by reducing brake force at the later half in casting. Fits to Daiwa TW 1000, 1012, 1025 and 1016 reels, T3(all models) and etc. Flat bottom, light-weight 14g spool to improve casting performance especially for relatively heavy rigs of 10g-28g 3/8-1oz, and for pitching in short distance. Made of G1 grade duralumin. In MAGFORCE-Z Boost brake, rotor will pop out far only at the beginning of casting to prevent backlash, and then it retracts to the middle to reduce brake to add casting distance. The second half spring is 4 times stronger than the first half to do the trick. Compared to SV Boost spools, this Magforce-Z Boost spools have more weight, and it is more suitable for heavier rigs. Casts great for heavier than 7g 1/4oz. 0.310mm(US12lb)-100m(110yds)
$96.00 -
Daiwa SLPW I shaped Wood Knob, KokutanF 30% off sale!
Kokutan, ebony super hard wood knob. 5g Fitting: Daiwa S.
Regular Price: $43.00
Special Price $30.00
