You have no items in your shopping cart.
With these shallow spools, you may cast with far less weight without effort. The total weight of spool with line is significantly reduced, and they accelerate easily with light rigs. You'll be amazed how the tuned reel casts. In choosing shallow spools, please consider the balance between line capacity and casting ability for light rigs.
Spool weight and approx least casting weight: 15g spool (most Shimano stock spool) 7g rig, 12g spool 5g, 10g spool 4g , 9g spool 3.5g, 8g spool 3.0g, 7g spool 2.5g, 6g spool 2.0g
You may easily remove SVS infiniti 4 brake holder from Shimano spools with this tool. Brake blocks are red for this model. Shimano 14Scorpion 200, 14Chromarch Ci4+, 14Calcutta Conquest, 15Aldebaran, 15Curado 200, 15Curado 200i and etc, SVS 4pt Infinite model.
You may easily remove SVS infiniti 6 brake holder from Shimano spools with this tool. Shimano 12Antares, 13Metanium
You may easily remove New SVS Infinity brake holder from Shimano spools with this tool. Fitting to Shimano New SVS Infinity with white brake blocks, later than 2016 models of Shimano. 16Metanium MGL, 16Scorpion70, 17ChronarchMGL, 18AldebaranMGL, 18Bnatam MGL, 20 Metanium and etc. Doesn't fit to the SVS Infinity with red brake blocks.
Ultra light weight spool for Shimano Bantam 100SG MAG cast reels. Fits to 10SG with brake drum model as well. 13.3g (stock 23.7g)
Old Shimano Bantam 200, 200SG, 20SG and etc, only for centrifugal brake models. 0.28mm-70m/80yds 11.5g (stock 22g), improve casting performances, great from 5g to cast.
Old Shimano Bantam 100, 100SG, 10SG and etc only for centrifugal brake models. not for 100EX. 0.26mm-65m/70yds 10.8g (stock 20g) Improve casting performances drastically especially for light rigs. Casts great for heavier than 4g rigs.
Shimano Curado 100B, 100D, Chronarch 50 MG
4pt brake holder installed. You may add at least 30% distance with 1/4-3/8oz rigs with this tuning spool.
Casts great for heavier than 4g 1/8oz
0.28mm(US10lb)-80m(90yds) 9.6g.
Shimano Core 100MG, Chronarch 100D, 07Metanium MG/MG7,year 2007-2012 models. 4pt brake holder installed. Casts great for heavier than 3g, 1/8oz. 0.28mm-50m 8.8g.
09Aldebaran Mg/Mg7, 10Scorpion XT1000/1001, 09Core 50MG, 10Chronarch 50E, 10Curado 50E. 4pt brake holder installed. Casts great for heavier than 3.0g 1/8oz. 0.26mm-50m/55yds 7.2g
09Aldebaran Mg/Mg7, '10 Scorpion XT1000/1001, 09Core 50MG, 10Chronarch 50R, 10Curado 50E. 4pt brake holder installed. Casts great for heavier than 3.0g 1/8oz. 0.31mm-75m/85yds 6.9g
Ultra light weight spool for Shimano12 Aldebaran BFS XG.
1224R spool, 2.4mm deep, 6.3g, 0.235mm-50m, 0.205mm-60m
Comes with 4 point brake unit.
Spool will work fine with MB-ALD1224K magnet brake as well.
Ultra light weight shallow spool for Shimano 12 Aldebaran BFS XG. Comes with 4pt brake holder. Please use stock brake blocks. 0.205mm(JP6lb)-40m. Please do not cut lines by holding spool, or spool will be damaged.
Shimano Calcutta 14Conquest 100/101/100HG/101HG (year 2014-,2015- model) No brake holder included. Please use SVS from original spool, and Avail SVS puller 4 in white is helpful.. Work with Magnet brake Avail ALD15, and you may adjust magnet brake with the dial. Casts great for heavier than 4g. 0.235mm-65m/70yds 10.2g You may use this spool with Avail magnet brake ALD15
Shimano 14 Brenious
4.8mm shallow spool, 8.6g. Fine to cast from 3g. 0.285mm-70mUltra light tuning spool for 2014 Scorpion 200, Curado 200i, 15Curado 200 JDM, Citica 200. With this spool you may cast from 5g 3/16oz without effort. Please use SVS Infiniti brake holder from original spool, and Avail SVS puller 4 white, listed at the end of spool section, is helpful to remove SVS. Spool weight 9.9g(Scorpion genuine 14.2g) 0.31mm(US12lb)-90m(100yds)
Shimano Calcutta 14Conquest 200 (year 2014-,2015- model) No brake included. Please use SVS from original spool, Avail SVS puller is helpful to remove SVS Casts great for heavier than 5g. 0.33mm-100m/110yds 10.9g
Shimano Calcutta 14Conquest 100 (year 2014-,2015- model) No brake holder included. Please use SVS from original spool, and Avail SVS puller is helpful to remove SVS. Casts great for heavier than 4g. 0.33mm-90m/100yds 9.8g
Shimano 15Aldebaran 50/51(year 2015- model) No brake holder installed. Please swap the SVS infinity from genuine spool to this spool. Infinity 4 puller is useful to pull out the SVS from spool. Work also with Magnet brake Avail MB-ALD15 listed below this page. Casts great for heavier than 2g. 0.260mm-60m/66yds 6.6g
Shimano 15 Aldebaran 50/51
Super light weight spool to improve casting distance by about 20%. Weight 9.2g. 0.235mm(US6lb)-45m(50yds). SVS Infinity brake installed. You may cast from 3.0g with this spool without effort. Stock spool is fine from 4.0g.
Regular Price: $104.00
Special Price $79.00
Shimano 16Scorpion70/71 Curado70/71(year 2016- model) Please swap SVS infinity brake holder from stock spool to this spool. New SVS Infinity puller tool is listed on this page at the bottom. Work also with Magnet brake Avail MB-SCP16. Great for 3g for 7020, 3.5g for 7040.
7020 Super shallow spool, 2.0mm deep, 0.235mm-45m/50yds, 9.7g
7040 shallow spool, 4.0mm deep, 0.285mm-60m/65yds, 10.2g
Ultra light weight spool for Shimano16Aldebaran BFS XG (magnet brake model) for the ultimate finesse performance. No additional magnet is required.
16ALD29R spool, 2.9mm deep, 5.1g.
Holidng 50% more lines than stock BFS spool.
0.235mm-60m, 0.260mm-50m, 0.285mm-40m
Shallow tuning spool for Shimano 16Metanium MGL reels. Machined from air craft grade duralumin bars to make them the lightest, and still tough. Please use SVS infinity brake from stock spool. Stock spool 11.8g without SVS, 0.285mm-100m
MT1620RI 11.4g, 2.0mm deep, 0.260mm-40m, may work with MT16K magnet brake
MT1636RI 11.8g, 3.6mm deep, 0.285mm-60m, may work with MT16K magnet brake
MT1670R 11.8g, 7.0mm deep, 0.330mm-95m
Extra magnet for 16ALD15R, 17CNQ15R, 17SCP15R, 22ALD22R spools. Please mount them on stock magnets.
Ultra light weight spool for Shimano16Aldebaran BFS XG (magnet brake model) for the ultimate finesse performance.
16ALD15R spool, 1.5mm deep, 4.9g, (genuine spool 7.7g)
Line capacitiy 0.205mm-35m, 0.165mm-45m (Genuine spool 0.235mm-45m)
8pcs of additional neodium magnets, sold separately, are required to use this spool. The shallow spool is far from brake system, and you need to add these 1mm thick magnets to compensate the decreased brake force.