I deal a lot of tuning parts for fishing reels. And please find spools, handles, knobs, brake systems, ball bearings, and colored parts listed separately.
2 ball bearing installed POM engineering plastic cog wheel for ABU.
Fits to ABU reels with 5152 gear, 21800 gear.
ABU 1500C, 2500C, Older 4500-6500 with fixed spool shafts. How to change cogs.
Shimano Calcutta 14Conquest 100 (year 2014-,2015- model)
No brake holder included. Please use SVS from original spool, and Avail SVS puller is helpful to remove SVS. Casts great for heavier than 4g.
0.33mm-90m/100yds 9.8g
Shimano Calcutta 14Conquest 200 (year 2014-,2015- model)
No brake included. Please use SVS from original spool, Avail SVS puller is helpful to remove SVS
Casts great for heavier than 5g.
0.33mm-100m/110yds 10.9g
ABU 2500C, 2501C, 2600C, 2601C
Super light weight 5.7g(except brake holder), ESD extra strong duralumin spool
0.285mm-90yds/80m Casts great from 7g
4pt brake holder installed
Daiwa T3(all models), Zillion1016TW, Steez1016TW, Ryoga1025, Pluton1025. Flat bottom, super light-weight spool to improve casting performance for wide range or weight. Extra strong duralumin spool. MAGFORCE-AIR brake. Casts great for heavier than 3g 1/8oz. 0.310mm(US10lb)-70m(80yds)
You may easily remove SVS infiniti 4 brake holder from Shimano spools with this tool. Brake blocks are red for this model. Shimano 14Scorpion 200, 14Chromarch Ci4+, 14Calcutta Conquest, 15Aldebaran, 15Curado 200, 15Curado 200i and etc, SVS 4pt Infinite model.
Ultra light tuning spool for 2014 Scorpion 200, Curado 200i, 15Curado 200 JDM, Citica 200. With this spool you may cast from 5g 3/16oz without effort. Please use SVS Infiniti brake holder from original spool, and Avail SVS puller 4 white, listed at the end of spool section, is helpful to remove SVS. Spool weight 9.9g(Scorpion genuine 14.2g) 0.31mm(US12lb)-90m(100yds)
ABU 4000-6000 reels with Ultracast design. 6500CS, older 4600C3, 4600C4, 5600C3, 5600C4 and etc before around 2000. Has smaller shafts to accept 22565 bakelite brake blocks.
Sway back, Extra Super Duralumin(ESD) handle frame fitting to almost all Shimano bait casters. It is very strong and super light weight. 85, 90, 95, 100, 105mm, weight 13.2g 100mm. Color: Champaign gold, gunmetal, black. Fits to: Shimano 50-250 reels. Sway back star drag is not needed to fit this handle. Please purchase additional 0.5mm washer for following models to adjust gap between star and handle. It is listed at the end of this handle listing. Accept both Daiwa S and Shimano A knobs. 85mm and 90mm are STi2.5 with light-weight duralumin knob shafts. 95-105mm handles are Sti2 with sturdy titanium knob shafts. Retainer washer in the same color as handle frame and screws included.
100mm long power handle with power knobs. Swept, machined aluminum frame, titanium knobs
All Daiwa and ABU bait casters.*1
No sway back star drag needed. Please specify right, left or SCR. For Daiwa reels with handle locking screw, instead of nut, should choose SCR. For Ex., Ryoga, Z, Zillion special models, Steez, Zillion TW and etc. Suitable for Daiwa 300-ABU6500 sized reels.
Light weight aluminum knob.
S size 33.5mm dia 19g
M size 39mm dia 25g
Fitting: Shimano A Fits to Shimano spinning 1000-4000, All bait casters in 50-400 size.
Daiwa 08TD-Zillion, 09/12TD-Zillion PE Special, 04TD-Z100 US Trail, 05TD-Z BBS, 21 Steez A HLC
Flat bottom shallow spool to improve casting distance by about 20%. Super Light weight 13.8g. 0.310mm(US12lb)-100m(110yds). Magforce-Z brake. This is the spool to improve 09Zillion reels in casting light rigs of 1/4-3/8oz. Zillion stock spool weight 21g.
Medium heavy wire hooks, great for large trout, salmons, walleyes and other freshwater/saltwater games.
Eyes are flat to hooks and it matches well to minnows. Ultra sharp hook points.
Recommended for up to 5kg/10lb fish, with 20lb test mono lines. 7-10 hooks in package.