Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
Tuning Parts
-
Avail EVA A-type knob Most recommended knob for 90-100mm handles
Relatively large, round shaped EVA knob. 27mm dia, 41mm length. 7g. Replaceable with Daiwa S, Shimano A knobs. Please purchase Avail GM knob caps sold separately.
$20.00 -
Avail Ultra Light Level Winder kit 2500C
Ultra light wight 1.9g level winder kit for ABU Ambassadeur 1500C, 2500C and 3500C. Stock level winder is 6.0g. Replaces level winder (line guide) 10212 and 21896. Body is made of duralumin, and wire is made of titanium. Please use stock pawl. 3 models for front surface, plain, 11-Line, and 17-Line.
-
Shimano Yumeya CI4+ Round handle knob L 35868, Shimano B
Ultra light weight 45mm dia large knob, 26g. Made of CI4+ engineering plastic to remove weight. Shimano B fitting. This knob is maily for multiply reels. Not for heavy use in jigging or offshore casting.
$43.00 -
Daiwa SLPW RCSB HLC1514 G1 Hyper Long Cast spool
Fits to Daiwa 15XX bait casters, including Daiwa 15Zillion TW1516. It also fits to Daiwa Zillion TWS100 export reels. This spool is to cast the longest for heavier than 1/2oz rigs. The brake rotor spring is 4 times stronger than regular spools, making it emitting far less brake force than regular spools. G1 duralumin material is employed. Spool dia 36mm, weight 14g, 0.310mm(US12lb)-100m(110yds).
-->$86.00 -
Shimano Yumeya Handle Knob Rubber T M Type B 03375
Flat knob for fast retrieve. Stock knob of 08-13Stella SW4000XG. 12g. Shimano B fitting. Stella SW4000-30000 and etc.
$28.00 -
Shimano Yumeya Rubber T Power Handle Knob M 03585
Ergonomic T shaped power grip for Shimano B. 70mm 34g. Fitting: Shimano B Fits to Shimano SW spinning 5000-30000, 11Ocea Jigger and etc.
$28.00 -
Daiwa large knob 100mm sway back Black handle
100mm light weight duralumin handle with large knobs for power cranking. Comes with retainer and screw. Fits to all Daiwa and ABU bait casters.*1 Handle frame is sway back and requires sway back star drag, or star will contact to the handle. You may change the knobs. 2 ball bearings installed (1 ball bearing per 1 knob)
-->$71.00 -
Daiwa EVA knob 100mm sway back handle Red
100mm light weight duralumin handle with EVA knobs for power cranking. Comes with retainer and screw. Fits to all Daiwa and ABU bait casters.*1 Handle frame is sway back and requires sway back star drag, or star will contact to the handle.
$65.00 -
Daiwa Star Nut M8 Left
Daiwa Star Nut Left thread for left hand models. M8. Fits to Daiwa/ABU M8 handle shafts.
$6.00 -
DRT Varial custom handle 87mm (without center nut) Limited offer!
DRT Varial handles are full machined heavy duty handles for big baits. Handle plate is quite thick 6mm at center to offer SOLID cranking. Stiff rubber knobs are large enough to grip firmly. Accept straight star up to 27mm radius, and sway back star drags. DRT Handle center nut is not included, and please purchase at least one or you may not fit the handle to reels. DRT replacement flat knob rubber is fitting to this 87mm handle. Made in Japan
-
Smoooooth Drag Carbontex Drag kit for Daiwa Tatula
Ultra smooth carbontex drag washers. 2 drag washers. Daiwa Tatula (100, 103, HD150, HD200), Tatula Type-R 100, Zillion TW(100, 1516) reels.
$8.00 -
Smoooooth Drag Carbontex Drag kit Daiwa bait casters #3
Ultra smooth carbontex drag washers. 3 drag washers. Set of 3 washers. Fits the following reels: TDS100hsd, TDX100hsd, TDX100hsdf, TDS103hsdf, TDS103hsd, TDS103psd, TDX103hsd, PR103hsd, PR100hsd, PR103hsd, PC100hsd, PC103hsd. You may improve uneven drag of Daiwa with these carbontex washers.
$8.00 -
Shimano Conquest 300/400 Power Handle Kit OC300HG
Single Power handle for Shimano 15/18 Conquest 300/301/400/401, 00 Conquest 300/400/401, Calcutta TE(TE-GT)300/400/401. This 70mm long power handle has egg shaped large knob for better grip, and the long arm allows you smooth strong cranking. Kit includes handle, right nut, a retainer washer and screw. 2 Ball bearings installed. Dimensions: 8mm shaft, 11mm hex nut. You may fit this power handle to other Shimano, Daiwa and ABU reels with 8mm main shaft.
$63.00 -
Shimano Conquest 300/400 Ergo Power Handle Kit OC300PG
Single Power handle for Shimano 15/18 Conquest 300/301/400/401, 00 Conquest 300/400/401, Calcutta TE(TE-GT)300/400/401. This 70mm long power handle has an ergo grip, and the long arm allows you smooth strong cranking. Kit includes handle, right nut, a retainer washer and a screw. 2 Ball bearings installed. Dimensions: 8mm shaft, 11mm hex nut. You may fit this power handle to other Shimano, Daiwa and ABU reels with 8mm main shaft.
$75.00 -
11mm hex nuts (8mm thread)
11mm hex nuts to fit handles for Conquest 300/400 models onto other reels. 8mm thread.
-
Daiwa Star Nut M8 Right
Daiwa Star Nut right thread, for right hand models. M8. Fits to Daiwa/ABU M8 handle shafts.
$6.00 -
Daiwa SLPW I shaped non-coated cork knob
Super light weight, bare compressed cork knob. 3g Fitting: Daiwa S All bait casters, except large conventional reels
$14.50 -
Daiwa SLPW I shaped cork knob, Metallic Pink
Plastic coated cork-inside knob. 5g Fitting: Daiwa S All bait casters, except large conventional reels
$14.50 -
Daiwa SLPW I shaped cork knob, Metallic Magenta
Plastic coated cork-inside knob. 5g Fitting: Daiwa S All bait casters, except large conventional reels
$14.50 -
Daiwa SLPW I shaped cork knob, Metallic Green
Plastic coated cork-inside knob. 5g Fitting: Daiwa S All bait casters, except large conventional reels
$14.50 -
Daiwa SLPW I shaped cork knob, Metallic Silver
Plastic coated cork-inside knob. 5g Fitting: Daiwa S All bait casters, except large conventional reels
$14.50 -
Daiwa SLPW I shaped cork knob, Glow
Plastic coated cork-inside knob. 5g Fitting: Daiwa S All bait casters, except large conventional reels
$14.50 -
Daiwa SLPW Power Round Cork knob GM
Super light weight, bare compressed cork knob. 8g 48mm length, 24mm diameter. 1 piece in package. Fitting: Daiwa S All bait casters, except large conventional reels
-->$25.00
