Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
-
- Spools, casting reels (69)
- Handles, casting reels (65)
- Handle knobs (59)
- Gears, brakes, level winders (80)
- Ball bearings, Pin remover (7)
- Spools, spinning reels (26)
- Handles, spinning reels (12)
- Frames, plates, star drag, colored parts (29)
- Drag washers (30)
Tuning Parts
-
Avail Microcast Spool AMB2520R no brake holder attached
Super shallow 2.0mm spool without brake holder. Please swap or purchase brake holder separately. ABU Ambassadeur 2500C, 2501C, 2600C, 2601C Super light weight 5.7g(except brake holder), ESD extra strong duralumin Casts great for heavier than 2.0g, example: 20m for 2.0g 0.235mm(JP8lb nylon)-45m/50yds, PE0.6-110m You may use AMB1520 Mag Brake with this spool as well.
-
Avail Microcast Spool AMB2540R no brake holder attached
Super shallow 4.0mm spool without brake holder. Please swap or purchase brake holder separately. ABU Ambassadeur 2500C, 2501C, 2600C, 2601C Super light weight 5.8g(except brake holder), ESD extra strong duralumin Casts great for heavier than 5g 0.26mm(JP10lb nylon)-80yds/70m, PE1-160m You may use AMB1540 Mag Brake with this spool as well.
-
Livre Crank Feather90 Shimano Ultra light weight machine-cut handle. It would take about a week to be ready.
90mm swept, aluminum billet frame, titanium knobs. All Shimano bait casters 50-250. Calcutta CT50-400 No sway back star drag needed. Red, Blue and Gold. Please specify right or left.
-
Avail retainer B Type for Avail handles
This retainer is for Avail tuning handles. It also fits to old Bantam 100, 200 reels. Nut size 10mm
-
Avail nut M7 for Shimano
7mm shaft, 10mm hex for Shimano 50-200 Black, Gunmetal, Light Chrome, Navy, Blue, Skyblue, Purple, Red, Pink, Orange, Gold, Ch Gold, Brown, Green. Champaign Gold matches perfect to Shimano Calcutta reels. Right thread for right hand reel, Left thread for left hand.
-
Livre Crank Feather90 Daiwa Ultra light weight machine-cut handle. It would take about a week to be ready.
90mm swept, machined aluminum frame, titanium knobs All Daiwa and ABU bait casters.*1 No sway back star drag needed. Please specify right, left or SCR. For Daiwa reels with handle locking screw, instead of nut, should choose SCR. For Ex., Ryoga, Z, Zillion special models, Steez, Zillion TW and etc.
-
Avail Off-set handle ESD STi2 for Daiwa 8mm
Sway back, Extra Super Duralumin(ESD) handle frame fitting to 8mm shaft reels, almost all Daiwa/ABU bait casters. It is very strong and super light weight. 85, 90, 95, 100, 105mm, weight 13.2g 100mm. Color: Champaign gold, gunmetal, black. Fits to ABU and Daiwa with sway-back star drags. Accept both Daiwa S and Shimano A knobs. 85mm and 90mm have light-weight ESD duralumin knob shafts. 95-105mm handles have sturdy titanium knob shafts. Comes with a retainer in the same color as handle frame, and a retainer screw.
-
Avail nut for ABU/Daiwa M8
8mm shaft, 10mm hex hooded nut for ABU/Daiwa reels for handle Black, Gunmetal, Light Chrome, Navy, Blue, Skyblue, Purple, Red, Pink, Orange, Gold, Ch Gold, Brown, Green. Champaign Gold matches perfect to Shimano Calcutta reels. Right thread for right hand reel, Left thread for left hand.
-
Avail POM 2 knobs
Avail POM engineering plastic knob 4.5g One knob in pack. POM is very strong plastic often used for gears. Fitting: Daiwa S, Shimano A.
-
Avail GM Aluminum knob caps
Fits only to Avail knobs. Black, red, blue, gunmetal, light chrome, navy, purple, orange, green, gold, champaign gold, pink, skyblue
-
ValleyHill 2 Ball bearing cross bar Jun's MUST BUY!!!
2 Ball bearing installed level winder kit removes friction and add casting distance.Three models, 4000, 5000, 6000 available for ABU Ambassadeur 4000-4600, 5000-5600, 6000-6600 respectively.
-
ValleyHill 1 Ball bearing level line for ABU 1500-6600C Selling out sale 70% OFF, was sold for $14
1 Ball bearing installed level winder tube kit removes friction and add casting distance. You use original worm shaft. 4 models, 2500, 4000, 5000, 6000 available for ABU 2500/3500C, 4000-4600, 5000-5600, 6000-6600 respectively. Sorry but 1500 for ABU1500C is no longer in production since around 2005.
-
ValleyHill Ceramic line guide
Zilconia ceramic coated line guide for ABU Ambassadeur classic reels. Line guide S for ABU1500C-2500C, Line guide M for ABU 4000-6600C reels. Not for SX or other models.
-
Avail Sway back star drag SD-ALB for Shimano 1992-2014 reels
Shimano 98 *Antares/Calais200, 92 Metanium (red)/Chronarch (pearl white), 97 Metanium/Chronarch SF, 00 Metanium MG, 00 Conquest50/100/200, 03/09 Conquest DC100/200, 05 *Antares AR/Calais100, 07 *Metanium MG/Core 100MG, 08 *Metanium MG DC, 09 *Scorpion1500XT/Curado200E, 09 *Aldebaran MG/Core 50MG, 10 *ScorpionXT1000/Chronarch50E/Curado50E, 14 *Brenious. For reels with * please install nut upside down, and narrow round side comes down. Please check here for fitting. Comes with two nuts for right and left thread, and a spring. Clicker is installed. Black, Gunmetal, Red, Purple, Sky Blue, Gold, Pink, Champaign Gold (Calcutta color)
-
Avail Sway back SD-HEX2 star drag
Long arm sway back star drag. Machined from alunimun block. Fitting : Shimano 13 Metanium, 14 Conquest 100/200, 14Chronarch Ci4+, 13Scorpion 200, 15Metanium DC, Curado 200i, Curado 200K, 15Curado200, 15Citica, 16Metanium MGL, 16Casitas MGL, 15Casitas, 17ChronarchMGL, 17ScorpionBFS, 17ScorpionDC, 17ConquestBFS, 18BantamMGL, 18Ocea Conquest300, 19SLX, 19Curado K, 19Scorpion MGL, 20/22SLX DC, 20Curado DC, 20ExsenceDCSS, 21ScorpionDC: Red, Purple, Sky Blue, Champaign Gold, Black, Gun metal
-
Avail sway back star drag SD-AB-KOF for ABU
Fits to ABU 1500IAR-2500IAR, 4500-6600 IAR, Morrun SX-High speed, SX MAG. Require more than 4mm gap between the top of casting control cap or chrome part on the side plate and the bottom of stock straight star. Not fit to old Ambassadeur because of the lacking of the gap mentioned above. For those reel please purchase straight star drag.
-
Daiwa Kago300 single handle kit, Right
55mm long single power handle with EVA knob for Daiwa/ABU bait casters with sway back star drag. 2 ball bearing installed. Fits both to Right hand reels. Comes with a nut (R), retainer and screw. Best for Millionaire 300 and ABU 6500/6600. Daiwa star wrench is required to turn nuts. For left hand reels, Daiwa Star Nut M8 Left is required.
Handle is swayed. Accepts sway back star drag, and straight shaped star drags of up to 23mm radius.$90.00 -
Daiwa Millionaire300SF handle kit, right
55mm long single power handle with large T knob for Daiwa/ABU bait casters. Fits to Right hand reels. Comes with a nut(R), retainer and screw. Best for Millionaire 300 and ABU 6500/6600. Daiwa star wrench is required to turn nuts. For left hand reels, Daiwa Star Nut M8 Left is required.
$50.00 -
Daiwa RCS I shaped cork knob, Red
Plastic coated cork knob. 5g.
Fitting: Daiwa S All bait casters, except large conventional reels$14.50 -
Daiwa RCS I shaped cork knob, Blue
Plastic coated cork knob. 5g.
Fitting: Daiwa S All bait casters, except large conventional reels$14.50 -
Daiwa RCS I shaped cork knob, black (0437)
Plastic coated cork knob. 5g.
Fitting: Daiwa S All bait casters, except large conventional reels$13.00 -
ABU brake blocks 4 pcs 20211
ABU brake blocks for 2pt metal brake plate and Avail 4pt brake plate. You may lock the brake.
-->$6.00 -
Avail, ABU C clip 1 pcs 4490-A
Avail made, ABU C clip to fasten super cog to cog post. It is also used to fasten main shaft to handle post.
$1.00 -
Avail Mag Brake CR2 right hand
Magnet brake system for ABU 4000, 4500, 4600, 5000, 5500, 5600, 6000, 6500, and 6600 reels without clicker. Reels with clicker switch, the brake system contacts to the clicker and you may not install the brake. Right hand retrieve only. 4 Super strong neodymium magnet independently adjustable How to install
$23.00
