Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
Daiwa
Tuning spools for Daiwa
Tuning spools 1000, 1012, 1016 fits to reel with 10XX numbers, like 1000, 1012, 1016, 1025 and etc. These spools also fits to T3 series. For other models, please find spools fitting to respective reels.-
Daiwa SLPW RCSB HLC1516 G1 Hyper Long Cast spool
Fits to Daiwa 15XX bait casters, including Daiwa 15Zillion TW1516. It also fits to Daiwa Zillion TWS100 export reels. This spool is to cast the longest for heavier than 1/2oz rigs. The brake rotor spring is 4 times stronger than regular spools, making it emitting far less brake force than regular spools. G1 duralumin material is employed. Spool dia 36mm, weight 14g, 0.330mm(JP16lb, US14lb)-100m(110yds).
$92.00 -
Daiwa SLPW RCSB HLC1514 G1 Hyper Long Cast spool
Fits to Daiwa 15XX bait casters, including Daiwa 15Zillion TW1516. It also fits to Daiwa Zillion TWS100 export reels. This spool is to cast the longest for heavier than 1/2oz rigs. The brake rotor spring is 4 times stronger than regular spools, making it emitting far less brake force than regular spools. G1 duralumin material is employed. Spool dia 36mm, weight 14g, 0.310mm(US12lb)-100m(110yds).
-->$86.00 -
Daiwa Zillion PE special 7.9R Spool Red
Daiwa 08TD-Zillion, 09/12TD-Zillion PE Special, 04TD-Z100 US Trail, 05TD-Z BBS, 21 Steez A HLC
Flat bottom shallow spool to improve casting distance by about 20%. Super Light weight 13.8g. 0.310mm(US12lb)-100m(110yds). Magforce-Z brake. This is the spool to improve 09Zillion reels in casting light rigs of 1/4-3/8oz. Zillion stock spool weight 21g.$103.00 -
Daiwa 07TD-Zillion HLC Spool
Daiwa 06TD-Zillion, 08/12TD-Zillion PE Special, 04TD-Z 100 US Trail, 05TD-Z BBS
This is the spool on 07TD-Zillion HLC Hyper Long Cast models, to cast heavier than 1/2oz rigs the longest. Its brake spring is 4 times stronger than regular Zillion spools, to emit far less brake than regular spools, allowing heavy rigs to cast 30% more for around 3/4-1oz plastic worm rigs. Spool body (rotating part) is machined to reduce weight by 30%. Weight 15.1g including bearings, 16lb(0.330mm) -110yds$82.00 -
Daiwa Zillion HLC spool spring
Fits to Daiwa 08Zillion, 09Zillion PE special and etc with Magforce Z brake system. This is the strong rotor spring employed to 09Zillion HLC hyper long cast reel spools. It is 4 times stronger than stock 08Zillion spools. With this HLC spring, spool will spin at twice the speed as stock spools at maximum, to cast 80-100yds with 1/2-1oz rigs.
$2.00 -
Daiwa Millionaire 103 long pinion shaft
Daiwa Millionaire 103 reels with Magforce brake, like CV-X/Z103/105, SW103, Barstock 103, Ringa SSS, Bay CastingSP103, Monoblock and etc. With this long pinion shaft inside cast control cap, you may install the tuning spools for Steez103/105 to your Millionaire 103 reels.
$3.00 -
Spool bearing installation service
This is the fee to install bearings onto spools. This service is only for customers who purchase bearing and spool together. Bearings on short shaft model, like Daiwa, Revo (except Gen 1 S and ST) requires to use pin remover, and this service is to do it for you. For long spool shaft reels like Shimanos, you don't have to replace the bearing on the shaft because it is not related to casting performances. It is to support shaft in case very large load is applied. For those reels please replace the two bearings at the both ends of spool shafts.
$5.00 -
Daiwa Spool Holder for repair SV spool
This is the replacement spool holder on Daiwa SV spools, in white. It is a cam at the rotor base, to push out roter when it is twisted by magnetic force. Its older version in black tend to get stuck with rotor, or to break in time. This white one is reinforced parts to replace the black spool holder. The C clip holding rotor may be removed by 2 flat head scerw drivers. You'll surely need a tweezers to set it back, to hold a washer in position and to set the C clip in the groove. C clip and a washer are pushed by a spring, and they jump out. Please take care.
$3.00
