Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
Spools, casting reels
-
Avail Microcast Spool 22BTM33R, 22BTM58R
22 Bantam reels. Please swap the SVS Infinity brake holder from stock spool, using SVS puller 6P listed on the product page. Ultra light weight spools, 7.8g of 33R, 8.8g of 58R instead of 12.1g of stock spool, accelerate fast with light rigs. 33R 3.3mm deep, 0.285mm-65m/72yds, fine for 5g 3/16oz or heavier 58R 5.8mm deep, 0.310mm-75m/83yds, fine for 7g 1/4oz or heavier
-
Avail Microcast Spool 19ANT41R
Fits to Shimano 19Antares reels. 4.1mm shallow spool weighs at 7.5g, instead of 10.9g of stock spool. The ultra light spool accelerate fast with light rigs of 3.5g well. You will swap the SVS brake holder from stock spool using Avail SVS puller Infinity. Or, use with magnet brake MB-19ANT listed below of the product page.
$87.00 -
Avail Microcast SXUM1618R spool for ABU Morrum SX1600C ULTRAMAG
ABU Morrum SX1600C ULTRAMAG Super light weight 7.2g (14.5g genuine spool), extra strong duralumin spool PE#0.6(0.15mm)-80m. Casts great for heavier than 3.5gram, 1/8oz
$87.00 -
Avail Microcast spool 20MT24R, 20MT42R for 20/22/23 Metanium
Ultra light weight shallow spool for Shimano 20/22/23 Metanium Japan, and 2020 Metanium USA for the ultimate finesse performance. 20MT24R, 2.4mm deep, 7.5g, line capacitiy 0.205mm-70m 20MT42R 4.2mm deep, 7.8g, line capacitiy 0.235mm-90m (genuine spool 14.1g, 0.285mm-100m) SVS Infinity brake holder is not coming with this spool, and please swap it from stock spool. Avail SVS Infinity Puller is useful to do the job. You may also use this spool with MB-20MT magnet brake system. Both are listed on this page below.
-
Daiwa SLPW RCSB SV Boost 1000 G1 spools Red and purple added
This spool extends casting distance by reducing brake force at the later half in casting. Fits to Daiwa 1000, 1012, 1025 and 1016 reels, T3(all models) and etc. Flat bottom, ultra light-weight 11g spool to improve casting performance especially for ultra light weight rigs 3g-7g 1/8-1/4oz. G1 grade duralumin. In SV Boost brake, rotor will pop out far only at the beginning of casting to prevent backlash, and then it retracts to the middle to reduce brake to add casting distance. The second half spring is 4 times stronger than first half to do the trick. Casts great for heavier than 3g 1/8oz. 0.330mm(US12lb)-80m(90yds)
--> -
Daiwa genuine, 1520 G1 Magforce-Z spool (Ryoga1520H #21)
G1 (air craft grade) duralumin spool for Daiwa 1500 sized reels. This genuine spool has moving brake rotor to automatically adjust brake force in casting. The brake system is great to prevent backlash for wide range of rigs. Line capacity JP20lb(0.370mm, US14lb)-100m(110yds), g, 36mm dia.
$100.00 -
Daiwa Zillion HLC spool spring
Fits to Daiwa 08Zillion, 09Zillion PE special and etc with Magforce Z brake system. This is the strong rotor spring employed to 09Zillion HLC hyper long cast reel spools. It is 4 times stronger than stock 08Zillion spools. With this HLC spring, spool will spin at twice the speed as stock spools at maximum, to cast 80-100yds with 1/2-1oz rigs.
$2.00 -
Avail Microcast Spool AMB2560R no brake holder attached
Medium shallow 6.0mm deep spool without brake holder. Please swap or purchase brake holder separately. ABU Ambassadeur 2500C, 2501C, 2600C, 2601C Super light weight 5.8g(except brake holder), ESD extra strong duralumin spool 0.285mm-90yds/80m Casts great from 7g
-
Avail Microcast spools 14CNQ2060R for Shimano 14Conquest 200 Selling out sale 30% off, was sold for $68
Shimano Calcutta 14Conquest 200 (year 2014-,2015- model) No brake included. Please use SVS from original spool, Avail SVS puller is helpful to remove SVS Casts great for heavier than 5g. 0.33mm-100m/110yds 10.9g
-
Avail Microcast Spool AMB1050R, Gunmetal
Avail shallow spool for ABU 1000 1000C reels. 0.285mm(US10lb, JP12lb)-70m. No brake holder is attached, and please swap genuine brake, or purchase 4pt brake listed together.
$80.00 -
Avail Microcast AMB4550R-EF spool, for Old ABU 4500C 4600C, Gunmetal
Avail shallow spool for old ABU 4500C, 4600C reels sold in 70's. 1976-78 4500C, and 1978 4600C with red thumb bars. Does not fit to other 4500 with bronze bushing reels, 4600CB or replica 4500C models sold later. 0.285mm-70m
$78.00 -
Avail Microcast Spool AMB2540R no brake holder attached
Super shallow 4.0mm spool without brake holder. Please swap or purchase brake holder separately. ABU Ambassadeur 2500C, 2501C, 2600C, 2601C Super light weight 5.8g(except brake holder), ESD extra strong duralumin Casts great for heavier than 5g 0.26mm(JP10lb nylon)-80yds/70m, PE1-160m You may use AMB1540 Mag Brake with this spool as well.
-
Avail Microcast Spool AMB2520R no brake holder attached
Super shallow 2.0mm spool without brake holder. Please swap or purchase brake holder separately. ABU Ambassadeur 2500C, 2501C, 2600C, 2601C Super light weight 5.7g(except brake holder), ESD extra strong duralumin Casts great for heavier than 2.0g, example: 20m for 2.0g 0.235mm(JP8lb nylon)-45m/50yds, PE0.6-110m You may use AMB1520 Mag Brake with this spool as well.
-
Avail Microcast Spool AMB1520R no brake holder attached
Super shallow 2.0mm spool without brake holder. Please swap or purchase brake holder separately. ABU Ambassadeur 1500C, 1600C, 1601C except 1500CA Limited Super light weight 5.2g, ESD shaft, ESD spool 0.205mm(JP6lb nylon)-45yds/40m, PE0.6-100m Casts great for heavier than 2.0g, example: 20m for 2.0g, You may use AMB1520 Mag Brake with this spool.
-
Avail Microcast Spool AMB1540R no brake holder attached
Super shallow 4.0mm spool without brake holder. Please swap or purchase brake holder separately. ABU Ambassadeur 1500C, 1600C, 1601C except 1500CA Limited Super light weight 5.2g, ESD shaft, ESD spool 0.235mm(JP8lb nylon)-65yds/60m, PE0.8-130m Casts great from 4g, You may use AMB1540 Mag Brake with this spool.
-
Avail Microcast Spool BTM2039R Old Bantam 200
Old Shimano Bantam 200, 200SG, 20SG and etc, only for centrifugal brake models. 0.28mm-70m/80yds 11.5g (stock 22g), improve casting performances, great from 5g to cast.
-
Avail SVS 6 Puller black 2012-2013
You may easily remove SVS infiniti 6 brake holder from Shimano spools with this tool. Shimano 12Antares, 13Metanium
$10.00 -
ABU Small Parts Kit for AMB spools
Small parts kit for Avail AMB spools UC4550, 5550, 6550. Comes with 2 ball bearings, 23403 cog, washer and 1116727 6pt brake unit.
$24.00 -
Spool bearing installation service
This is the fee to install tuning bearings onto spools at behind spool pins, only for customers who purchase bearing and spool together. Bearings on spool shafts have to be replaced by a special tool, pin remover, and this service is to do it for you.
$5.00 -
Avail Microcast Spool AMB2518TR no brake holder attached
Super shallow 1.8mm spool without brake holder. Please swap or purchase brake holder separately. ABU Ambassadeur 2500C, 2501C, 2600C, 2601C Extreme light weight 5.8g, machined ESD(extra strong duralumin) spool Casts great for heavier than 2.0g, example: 20m for 2.0g 0.235mm-50m, PE0.6-100m You may use Avail Magnet brake 2518 with this spool.
-
Avail New SVS Infinity Puller for 4pt brake, NEW-PULLER-INFINITY
You may easily remove SVS Infinity brake holder from Shimano spools with this tool. Fitting to Shimano New SVS Infinity 4pt brake models, 14Scorpion 200, 14Chromarch Ci4+, 14Calcutta Conquest, 15Aldebaran, 15Curado 200, 15Curado 200i, 16Metanium MGL, 16Scorpion70, 17ChronarchMGL, 18AldebaranMGL, 18Bnatam MGL, 19Antares, 20/22/23Metanium, 21/22Calcutta Conquest, and etc. Colored ring may be in red, blue, gold, skyblue and etc.
$13.00 -
Daiwa SLPW, RCSB HD 1520 G1 spool
G1 (air craft grade) duralumin heavy duty spool for Daiwa 1500 sized reels. This HD spool has fixed brake rotor to emit stable brake force in casting. The brake is great for bulky rigs like swim baits, large deep divers and spinner baits. LIne capacity JP20lb(0.370mm, US14lb)-100m(110yds), 15g, 36mm dia.
-->$110.00 -
Avail Microcast spool 19SLX40R spool for SLX 2019 SLX, not for 22 SLX DC XT or other SLX
4.0mm shallow spool to improve casting performance for 5-10g light weight rigs. For 2019 SLX, not for 22 SLX DC XT or other SLX Please swap the SVS Infinity brake holder from stock spool, using SVS puller 2016 listed on the page of this spool. Line capacity 0.265mm-75m
$70.00 -
Daiwa Spool Holder for repair SV spool, 16Steez
This is the replacement spool holder on Daiwa SV reels and SV spools sold from 2013 to 2019. It is a cam at the brake rotor base, to push out the brake rotor when it is twisted by magnetic force. Its older version in black tend to get stuck with rotor cam, or to break in time at its very thin posts. This white one is reinforced parts to replace the black spool holder. Later than 2020 year model SV reels seem to have new black cam in better design. The C clip holding rotor may be removed by 2 flat head scerw drivers. You'll surely need a tweezers to set it back, to hold a washer in position and to set the C clip in the groove. C clip and a washer are pushed by a spring, and they jump out. Please take care.
$3.00
