Cart - 0 Item

You have no items in your shopping cart.

High-quality fishing tackle directly from Japan to worldwide. All prices are in US$.
Spools, casting reels
Compare Products

You have no items to compare.

Browse By
Category
  1. Shimano (29)
  2. Daiwa (33)
  3. ABU (28)

Spools, casting reels

  • Avail Microcast AMB6550UC finesse spool

    ABU 6500C, 6600C Ultra Cast model Super light weight 17.8g, extra strong duralumin spool. small parts sold separately. 0.31mm-130yds/120m Casts great for heavier than 8g. Please use the small parts from stock spool or sold belowseparately.


    Add to Wishlist
  • Avail Microcast AMB2520R finesse spool+ 4pt brake

    ABU 2500C, 2501C, 2600C, 2601C Super light weight 5.7g(except brake holder), ESD extra strong duralumin Casts great for heavier than 2.0g, example: 20m for 2.0g 0.235mm(JP8lb nylon)-45m/50yds You may use AMB1520 Mag Brake with this spool as well.


    Add to Wishlist
  • Avail Microcast AMB2540R finesse spool+ 4pt brake

    ABU 2500C, 2501C, 2600C, 2601C Super light weight 5.8g(except brake holder), ESD extra strong duralumin Casts great for heavier than 5g 0.26mm(JP10lb nylon)-80yds/70m You may use AMB1540 Mag Brake with this spool as well.


    Add to Wishlist
  • Avail Microcast ALD1218TR spool black

    Ultra light weight shallow spool for Shimano 12 Aldebaran BFS XG. Comes with 4pt brake holder. Please use stock brake blocks. 0.205mm(JP6lb)-40m. Please do not cut lines by holding spool, or spool will be damaged.

    $105.00
    Add to Wishlist

  • Megabass Honeycomb spool for Zonda Alphas

    Megabass Zonda series reels, Daiwa Alphas 103/105, Sol 103. Casts great for heavier than 4g. Fixed brake rotor. Ultra light 10g, 0.285mm(10lb)-/80m(90yds)

    $179.00

    Out of stock

  • Avail Microcast Spool BTM1039R  Old Bantam 100

    Old Shimano Bantam 100, 100SG, 10SG and etc only for centrifugal brake models. not for 100EX. 0.26mm-65m/70yds 10.8g (stock 20g) Improve casting performances drastically especially for light rigs. Casts great for heavier than 4g rigs.


    Add to Wishlist
  • Daiwa Millionaire 103 long pinion shaft

    Daiwa Millionaire 103 reels with Magforce brake, like CV-X/Z103/105, SW103, Barstock 103, Ringa SSS, Bay CastingSP103, Monoblock and etc. With this long pinion shaft inside cast control cap, you may install the tuning spools for Steez103/105 to your Millionaire 103 reels.

    $3.00
    Add to Wishlist

  • Daiwa RCSB 1012 Shallow spool

    Daiwa T3, T3 MX, T3 ballistic, RCS 1016, 1025 reels (Ryoga, Pluton). Flat bottom, super light-weight spool to improve casting performance for wide range or weight. MAGFORCE-Z brake. Casts great for heavier than 7g. 0.285mm(US10lb)-100m(110yds), 14g

    $80.00
    Add to Wishlist

  • Daiwa RCS C2012PE spool  selling out special

    Ryoga Bay Jigging C20XX models. Not for Ryoga or Pluton with Magforce brake.
    0.205mm-200m/220yds, 0.33mm-140yds, 2 point centrifugal brake

    Regular Price: $70.00

    Special Price $35.00

    Add to Wishlist

  • ABU Small Parts Kit for AMB spools

    Small parts kit for Avail AMB spools UC4550, 5550, 6550. Comes with 2 ball bearings, 23403 cog, washer and 1116727 6pt brake unit.

    $29.00
    Add to Wishlist

  • Avail SVS 6 Puller black 2012-2013

    You may easily remove SVS infiniti 6 brake holder from Shimano spools with this tool. Shimano 12Antares, 13Metanium

    $10.00
    Add to Wishlist

  • Avail Microcast spool CU1050 for 98Curado100B  JapanTackle original for Curado 100

    Shimano Curado 100B, 100D, Chronarch 50 MG
    4pt brake holder installed. You may add at least 30% distance with 1/4-3/8oz rigs with this tuning spool.
    Casts great for heavier than 4g 1/8oz 0.28mm(US10lb)-80m(90yds) 9.6g.


    Add to Wishlist
  • Avail Microcast Honey Comb Spool ALD0950RR for Shimano 09Aldebaran MG, 09Core 50MG  Re-stocked!

    09Aldebaran Mg/Mg7, '10 Scorpion XT1000/1001, 09Core 50MG, 10Chronarch 50R, 10Curado 50E. 4pt brake holder installed. Casts great for heavier than 3.0g 1/8oz. 0.31mm-75m/85yds 6.9g


    Add to Wishlist
  • Avail Microcast Spool 18BTM36RI, 18BTM58RI  18 Bantam MGL 150

    18 Bantam MGL 150. Please swap the SVS Infinity brake holder from stock spool, using SVS puller listed on the page of this spool. 36RI 3.6mm deep spool, 0.285mm-60m/70yds, 11.7g fine for 5g 3/16oz 58RI 5.8mm deep spool, 0.370mm-60m/70yds, 12.2g fine for 7g 1/4oz


    Add to Wishlist
  • Avail Microcast spool MT0726RR  07 Core 100MG, Chronarch 100D, 07 Metanium MG

    Shimano Core 100MG, Chronarch 100D, 07Metanium MG/MG7,year 2007-2012 models. 4pt brake holder installed. Casts great for heavier than 3g, 1/8oz. 0.28mm-50m 8.8g.


    Add to Wishlist
  • Avail Microcast AMB3540R finesse spool with 4pt brake

    ABU Ambassadeur 3500C Super light weight 6.5g, extra strong duralumin spool 0.260mm-70m/80yds 4pt brake holder installed


    Add to Wishlist
  • Avail Microcast AMB4550R-EF spool, for Old ABU 4500C 4600C

    Avail shallow spool for old ABU 4500C, 4600C reels sold in 70's. Does not fit to 4500 with bronze bushing reels, 4600CB or replica 4500C models sold later. 0.285mm-70m

    $98.00
    Add to Wishlist

  • Daiwa Zillion HLC spool spring

    Fits to Daiwa 08Zillion, 09Zillion PE special and etc with Magforce Z brake system. This is the strong rotor spring employed to 09Zillion HLC hyper long cast reel spools. It is 4 times stronger than stock 08Zillion spools. With this HLC spring, spool will spin at twice the speed as stock spools at maximum, to cast 80-100yds with 1/2-1oz rigs.

    $2.00

    Out of stock

  • Spool bearing installation service

    This is the fee to install bearings onto spools. This service is only for customers who purchase bearing and spool together. Bearings on short shaft model, like Daiwa, Revo (except Gen 1 S and ST) requires to use pin remover, and this service is to do it for you. For long spool shaft reels like Shimanos, you don't have to replace the bearing on the shaft because it is not related to casting performances. It is to support shaft in case very large load is applied. For those reels please replace the two bearings at the both ends of spool shafts.

    $5.00
    Add to Wishlist

  • Daiwa SLPW RCSB HLC1514 G1 Hyper Long Cast spool

    Fits to Daiwa 15XX bait casters, including Daiwa 15Zillion TW1516. It also fits to Daiwa Zillion TWS100 export reels. This spool is to cast the longest for heavier than 1/2oz rigs. The brake rotor spring is 4 times stronger than regular spools, making it emitting far less brake force than regular spools. G1 duralumin material is employed. Spool dia 36mm, weight 14g, 0.310mm(US12lb)-100m(110yds).

    -->
    $86.00

    Out of stock

  • Avail Microcast spools 14CNQ1024RI  14Conquest 100/101

    Shimano Calcutta 14Conquest 100/101/100HG/101HG (year 2014-,2015- model) No brake holder included. Please use SVS from original spool, and Avail SVS puller 4 in white is helpful.. Work with Magnet brake Avail ALD15, and you may adjust magnet brake with the dial. Casts great for heavier than 4g. 0.235mm-65m/70yds 10.2g You may use this spool with Avail magnet brake ALD15


    Add to Wishlist
  • Avail Microcast spools ALD1532RI  15Aldebaran 50/51

    Shimano 15Aldebaran 50/51(year 2015- model) No brake holder installed. Please swap the SVS infinity from genuine spool to this spool. Infinity 4 puller is useful to pull out the SVS from spool. Work also with Magnet brake Avail MB-ALD15 listed below this page. Casts great for heavier than 2g. 0.260mm-60m/66yds 6.6g


    Add to Wishlist
  • Avail Microcast spools 16SCP7020RI 7040RI  16Scorpion70/71 Curado70/71

    Shimano 16Scorpion70/71 Curado70/71(year 2016- model) Please swap SVS infinity brake holder from stock spool to this spool. New SVS Infinity puller tool is listed on this page at the bottom. Work also with Magnet brake Avail MB-SCP16. Great for 3g for 7020, 3.5g for 7040.

    7020 Super shallow spool, 2.0mm deep, 0.235mm-45m/50yds, 9.7g

    7040 shallow spool, 4.0mm deep, 0.285mm-60m/65yds, 10.2g


    Add to Wishlist
  • Daiwa SLP Works Tatula 100 spool D  Special sale 70% off

    Daiwa 14-16Tatula100/103 reels, except CT. Flat bottom, extra strong duralumin deep spool. MAGFORCE-Z brake. 0.330mm(US14lb)-100m(110yds) 16.0g

    Regular Price: $100.00

    Special Price $30.00

    Add to Wishlist

Set Ascending Direction
  1. 1
  2. 2
  3. 3
  4. 4