Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
Spools, casting reels
-
Roro BFS Spool DIY AX23 Black, Daiwa Alphas SV TW
You may cast 3g. Ultra light weight 4.5mm deep shallow tuning spool for Daiwa 21/22Alphas SV TW 800/800S series reels. Titanium shaft. 32mm dia. 4.1g (measured without bearing) Fixed brake rotor offer stable brake.
$80.00 -
Roro BFS Spool DIY AX27, standard, Black, Daiwa Alphas 103
You may cast 3g. 3.0mm deep spool. Ultra light weight shallow tuning spool for Daiwa Alphas 103/105, Daiwa Sol and Megabass Zonda, Lauda, Alphas SV 105, Alphas KTF, Alphas Ito 103. 33mm dia. 5.35g(measured without ball bearing) PE#1.0(0.18mm)-100m Fixed brake rotor offer stable brake. Not for Alphas Air, Alphas CT or 21/22 Alphas SV TW 800. Photo is in gold for your reference.
$88.00 -
Roro BFS Spool DIY RX29, Gold, Daiwa TW1000, TD-Z
You may cast 3g. Ultra light weight 2.5mm deep tuning spool for Daiwa TW 1000 series reels, and TD-Z reels. Steez SV TW, Zillion SV TW, 17Steez A TW, Steez 100, T3 except T3 Air, Ryoga 1016, Pluton 1016, Zillion TW1016, TD-Z103, TD-X103H, SS SV and etc. 34mm dia. 4.9g(measured without ball bearing) Centre shaft is made of titanium alloy. PE#0.8(0.16mm)-70m Fixed brake rotor offer stable brake.
$88.00 -
Daiwa SLPW RCSB SV Boost PE 1000 G1 spool 2023 NEW!
This shallow spool has SV Boost brake specifically tuned to be used with PE braided lines of thinner than #0.8. It Flat bottom, ultra light-weight 11g spool to improve casting performance. Made of G1 grade duralumin. In the SV-Boost brake, rotor will pop out far only at the beginning of casting to prevent backlash, and then it retracts to the middle to reduce brake to add casting distance. The second half spring is 4 times stronger than first half to do the trick. Casts great for heavier than 3g 1/8oz. PE0.8-150m, 0.285mm(US10lb)-70m(80yds)
$107.00 -
Daiwa SLPW RCSB SV Boost 1000S G1 shallow spools 2023 Red and purple added
This shallow SV spool extends casting distance by reducing brake force at the later half in casting. Fits to Daiwa 1000, 1012, 1025 and 1016 reels, T3(all models) and etc. Flat bottom, ultra light-weight 11g spool to improve casting performance especially for ultra light weight rigs 3g-7g 1/8-1/4oz. G1 grade duralumin. In SV Boost brake, rotor will pop out far only at the beginning of casting to prevent backlash, and then it retracts to the middle to reduce brake to add casting distance. The second half spring is 4 times stronger than first half to do the trick. Casts great for heavier than 3g 1/8oz. 0.285mm(US10lb)-70m(80yds)
-
Avail Microcast AMB5550C70'S spool Silver, Old ABU 5500C 70's
Avail super shallow spool for old ABU 5500C reels in 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5500C sold in 80's or later. Difference is at the genuine spool, and 70's spool has silver plates on both sides, but 80's doesn't have them and it is black spool wall. 0.285mm-110m
$78.00 -
Roro BFS Spool DIY BQ27, Shimano 16Aldebaran BFS
You may cast 3g. Ultra light weight 2.5mm deep super shallow tuning spool for Shimano 16Aldebaran BFS. CNC machined ESD extra strong duralumin spool with titanium center shaft. 32mm dia. 4.50g. Stock spool weight is Aldebaran BFS spool 7.2g. Not for 17Conquest BFS or 17Scorpion BFS. Please insert pinion peek bar accompanied to pinion gear.
-
Avail Microcast BTM1039R-MAG spool, Black
Ultra light weight spool for Shimano Bantam 100SG MAG cast reels. Fits to 10SG with brake drum model as well. 13.3g (stock 23.7g)
$92.00 -
Roro BFS Spool DIY CB26 Gold, Shimano 17Scorpion BFS
You may cast 3g. Ultra light weight 3mm deep super shallow tuning spool for Shimano 17Scorpion BFS, 21 SLX BFS, 21Curado BFS. CNC machined ESD extra strong duralumin spool with titanium center shaft. 32mm dia. 4.97g. Stock spool weights are Scorpion BFS spool 8.9g, SLX BFS 9.2g. Not for 17Conquest BFS or 16Aldebaran BFS. Please insert pinion peek bar accompanied to pinion gear.
$93.00 -
Avail Microcast AMB5050R-C spool Silver, Old ABU 5000C 5001C
Avail shallow spool for old ABU 5000C 5001C reels in 60's and 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5000C with palming cup, 5000C with a little popping gear plate, 5000 with bronz bushing or 5500C high speed reels. 0.285mm-110m
$78.00 -
Avail Microcast AMB5030R-C spool Black, Old ABU 5000C 5001C
Avail super shallow spool for old ABU 5000C 5001C reels in 60's and 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5000C with palming cup, 5000C with a little popping gear plate, 5000 with bronz bushing or 5500C high speed reels. 0.285mm-75m
$78.00 -
Avail Microcast spool 22ALD22R for 22 Aldebaran BFS 2022 NEW products
Ultra light weight ultra shallow spool for Shimano 22 Aldebaran BFS for the ultimate finesse performance. You may easily cast from 1.5g with this spool. 2.2mm deep, 4.7g, line capacitiy 0.148mm(JP4lb)-57m, 0.165mm(JP6lb)-38m (genuine spool 6.7g, 0.235mm-45m) Please add magnets if you feel you need more brake force. Magnets are listed below of this page.
-
Avail Microcast AMB5050R-C spool Black, Old ABU 5000C 5001C
Avail shallow spool for old ABU 5000C 5001C reels in 60's and 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5000C with palming cup, 5000C with a little popping gear plate, 5000 with bronz bushing or 5500C high speed reels. 0.285mm-110m
$78.00 -
Avail Microcast AMB5550C70'S spool Red, Old ABU 5500C 70's
Avail shallow spool for old ABU 5500C reels in 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5500C sold in 80's or later. Difference is at the genuine spool, and 70's spool has silver plates on both sides, but 80's doesn't have them and it is black spool wall. 0.285mm-110m
$78.00 -
Avail Microcast AMB5530C70'S spool Black, Old ABU 5500C 70's
Avail super shallow spool for old ABU 5500C reels in 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5500C sold in 80's or later. Difference is at the genuine spool, and 70's spool has silver plates on both sides, but 80's doesn't have them and it is black spool wall. 0.285mm-75m
$78.00 -
Daiwa SLPW RCSB SV 800S spool, Black, shallow 2022 November NEW!
This shallow SV spool is to improve casting performance of Daiwa Alpahs SV 800 reels. Flat bottom, ultra light-weight 12g spool to improve casting performance especially for ultra light weight rigs 3g-7g 1/8-1/4oz. Casts great for heavier than 3g 1/8oz. 0.285mm(US10lb)-55m(60yds)
$74.00 -
21 Steez A TW HLC mild spool Re-stocked!
This modified Magforce Z Boost spool has 0.8mm longer brake rotor installed to emit more brake force than stock spool, and you may cast from 14g easy and long. Fits to Daiwa 21/22 Steez A TW HLC reels.
$120.00 -
Daiwa SLPW RCSB SV Boost 1000 G1 spools 2022 Red and purple added
This spool extends casting distance by reducing brake force at the later half in casting. Fits to Daiwa 1000, 1012, 1025 and 1016 reels, T3(all models) and etc. Flat bottom, ultra light-weight 11g spool to improve casting performance especially for ultra light weight rigs 3g-7g 1/8-1/4oz. G1 grade duralumin. In SV Boost brake, rotor will pop out far only at the beginning of casting to prevent backlash, and then it retracts to the middle to reduce brake to add casting distance. The second half spring is 4 times stronger than first half to do the trick. Casts great for heavier than 3g 1/8oz. 0.330mm(US12lb)-80m(90yds)
-
Avail New SVS Infinity Puller 2016 with colored ring
You may easily remove New SVS Infinity brake holder from Shimano spools with this tool. Fitting to Shimano New SVS Infinity with white brake blocks, later than 2016 models of Shimano. 16Metanium MGL, 16Scorpion70, 17ChronarchMGL, 18AldebaranMGL, 18Bnatam MGL, 20 Metanium and etc. Doesn't fit to the SVS Infinity with red brake blocks.
$18.00 -
Daiwa Tatula 103H-TW #23 Japan shallow spool D Special sale 70% off
Daiwa 14-16Tatula reels 100/103 models, except CT. 30% shallower spool to remove extra line weight (about 3gram) to improve casting performance for 1/4-3/8oz rigs. 0.300mm(US12lb)-100m/110yrds, spool dia34mm, weight 17.5g. Tatula US 18.3g 0.300-140m Tatula TypeR 16.2g 0.300-140m Doesn't fit to Tatula 150 model with 36mm-dia spool.
Regular Price: $80.00
Special Price $24.00
-
Avail Microcast Spool BTM2039R Old Bantam 200
Old Shimano Bantam 200, 200SG, 20SG and etc, only for centrifugal brake models. 0.28mm-70m/80yds 11.5g (stock 22g), improve casting performances, great from 5g to cast.
-
Avail Microcast AMB1540R finesse spoolwith 4pt brake holder
ABU 1500C, 1600C, 1601C Super light weight 7.5g, titanium shaft, ESD spool 0.235mm(JP8lb nylon)-65yds/60m Casts great from 4g, You may use AMB1520 Mag Brake with this spool.
-
Avail Microcast AMB1520R finesse spool with 4pt brake holder
ABU 1500C, 1600C, 1601C Super light weight 7.6g, titanium shaft, ESD spool 0.205mm(JP6lb nylon)-45yds/40m Casts great for heavier than 2.0g, example: 20m for 2.0g, You may use AMB1520 Mag Brake with this spool.
-
Avail Microcast AMB5550UC2 shallow spool
ABU 5500C, 5600C Ultra Cast model (spool shaft separates from spool body) Super light weight shallow spool to upgrade casting performance. 12.2g, instead of 17.1g of stock spool. Extra strong duralumin spool. 5mm deep, 0.31mm(US12lb)-110yds/100m Casts great for heavier than 5g. Now this new version has cog pert machined separately to hold spool gear tight. Please use the small parts (2 ball bearings, a washer, brake holder and white spool gear) from stock spool, or purchased additionally.
