Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
Spools, casting reels
-
Avail Microcast Spool ALD0928R II for Shimano 09 Aldebaran MG, Core 50MG Re-stocked!
09Aldebaran Mg/Mg7, 10Scorpion XT1000/1001, 09Core 50MG, 10Chronarch 50E, 10Curado 50E. 4pt brake holder installed. Casts great for heavier than 3.0g 1/8oz. 0.26mm-50m/55yds 7.2g
-
Daiwa SLPW RCSB SV Boost 1000 G1 spools 2022 Red and purple added
This spool extends casting distance by reducing brake force at the later half in casting. Fits to Daiwa 1000, 1012, 1025 and 1016 reels, T3(all models) and etc. Flat bottom, ultra light-weight 11g spool to improve casting performance especially for ultra light weight rigs 3g-7g 1/8-1/4oz. G1 grade duralumin. In SV Boost brake, rotor will pop out far only at the beginning of casting to prevent backlash, and then it retracts to the middle to reduce brake to add casting distance. The second half spring is 4 times stronger than first half to do the trick. Casts great for heavier than 3g 1/8oz. 0.330mm(US12lb)-80m(90yds)
-
Avail Microcast spool 20MT24R, 20MT42R for 20 Metanium, 22 Metanium Shallow
Ultra light weight shallow spool for Shimano 20 Metanium and 22 Metanium Shallow for the ultimate finesse performance. 20MT24R, 2.4mm deep, 7.5g, line capacitiy 0.205mm-70m 20MT42R 4.2mm deep, 7.8g, line capacitiy 0.235mm-90m (genuine spool 14.1g, 0.285mm-100m) SVS Infinity brake holder is not coming with this spool, and please swap it from stock spool. Avail SVS Infinity Puller is useful to do the job. You may also use this spool with MB-20MT magnet brake system. Both are listed on this page below.
-
Avail Microcast AMB5050R-C spool Silver, Old ABU 5000C 5001C
Avail shallow spool for old ABU 5000C 5001C reels in 60's and 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5000C with palming cup, 5000C with a little popping gear plate, 5000 with bronz bushing or 5500C high speed reels. 0.285mm-110m
$78.00 -
Avail Microcast AMB5030R-C spool Black, Old ABU 5000C 5001C
Avail super shallow spool for old ABU 5000C 5001C reels in 60's and 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5000C with palming cup, 5000C with a little popping gear plate, 5000 with bronz bushing or 5500C high speed reels. 0.285mm-75m
$78.00 -
Avail Microcast spool 22ALD22R for 22 Aldebaran BFS
Ultra light weight ultra shallow spool for Shimano 22 Aldebaran BFS for the ultimate finesse performance. You may easily cast from 1.5g with this spool. 2.2mm deep, 4.7g, line capacitiy 0.148mm(JP4lb)-57m, 0.165mm(JP6lb)-38m (genuine spool 6.7g, 0.235mm-45m) Please add magnets if you feel you need more brake force. Magnets are listed below of this page.
-
Daiwa SLPW RCSB MAG-Z Boost 1000 G1 spool, Silver 2022 Model
This spool extends casting distance by reducing brake force at the later half in casting. Fits to Daiwa 1000, 1012, 1025 and 1016 reels, T3(all models) and etc. Flat bottom, light-weight 15g spool to improve casting performance especially for relatively heavy rigs of 10g-28g 3/8-1oz. G1 grade duralumin. In MAGFORCE-Z Boost brake, rotor will pop out far only at the beginning of casting to prevent backlash, and then it retracts to the middle to reduce brake to add casting distance. The second half spring is 4 times stronger than the first half to do the trick. Compared to SV Boost spools, this Magforce-Z Boost spools have more weight, and it is more suitable for heavier rigs. You may cast long distance without fear of backlash with this spool. Casts great for heavier than 7g 1/4oz. 0.330mm(US12lb)-100m(110yds)
$96.00 -
Avail Microcast AMB5050R-C spool Black, Old ABU 5000C 5001C
Avail shallow spool for old ABU 5000C 5001C reels in 60's and 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5000C with palming cup, 5000C with a little popping gear plate, 5000 with bronz bushing or 5500C high speed reels. 0.285mm-110m
$78.00 -
Avail Microcast OLD5550C70'S spool Red, Old ABU 5500C 70's
Avail shallow spool for old ABU 5500C reels in 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5500C sold in 80's or later. Difference is at the genuine spool, and 70's spool has silver plates on both sides, but 80's doesn't have them and it is black spool wall. 0.285mm-110m
$78.00 -
Daiwa genuine, 1520 G1 Magforce-Z spool (Ryoga1520H #21)
G1 (air craft grade) duralumin spool for Daiwa 1500 sized reels. This genuine spool has moving brake rotor to automatically adjust brake force in casting. The brake system is great to prevent backlash for wide range of rigs. LIne capacity JP20lb(0.370mm, US14lb)-100m(110yds), g, 36mm dia.
$100.00 -
Daiwa SLPW, RCSB HD 1520 G1 spool
G1 (air craft grade) duralumin heavy duty spool for Daiwa 1500 sized reels. This HD spool has fixed brake rotor to emit stable brake force in casting. The brake is great for bulky rigs like swim baits, large deep divers and spinner baits. LIne capacity JP20lb(0.370mm, US14lb)-100m(110yds), 15g, 36mm dia.
$110.00 -
Daiwa Spool Holder for repair SV spool, 16Steez
This is the replacement spool holder on Daiwa SV reels and SV spools sold from 2013 to 2019. It is a cam at the brake rotor base, to push out the brake rotor when it is twisted by magnetic force. Its older version in black tend to get stuck with rotor cam, or to break in time at its very thin posts. This white one is reinforced parts to replace the black spool holder. Later than 2020 year model SV reels seem to have new black cam in better design. The C clip holding rotor may be removed by 2 flat head scerw drivers. You'll surely need a tweezers to set it back, to hold a washer in position and to set the C clip in the groove. C clip and a washer are pushed by a spring, and they jump out. Please take care.
-->$3.00 -
Avail Microcast spools CNQ5020TR 00Conquest 50/51
Shimano Calcutta 00Conquest 50/51(year 2000-2013 model) 4 pt brake holder installed. Work with Magnet brake Avail SHSC-50A as well. Casts great for heavier than 2g. 0.205mm-45m/50yds 7.0g
-
Shimano 20 Metanium Japan spool
Genuine spool of Japan version 20 Metanium, 20% shallower spool than export version 20 Metanium, to improve casting performance for light rigs. It holds 0.285mm(US10lb)-100m(110yds), instead of export spool of US12lb(0.30mm)-110yds(100m). Spool depth 7mm at 2mm from side edge, instead of 9mm of export. Comes with brake holder and 4 brake blocks installed. Ready to use. Fits only to 20 Metanium reels. 14.1g
$74.00 -
Shimano Yumeya 20 Metanium Shallow spool 20 Metanium
Shimano 20/22/23 Metanium reels
-->
Light weight 14.3g, 35% shallower spool than Japan version 20 Metanium stock spool, 50% shallower than export Metanium (24 Metanium 100), to improve casting performance for light rigs around 3/16-1/2oz. 0.285mm(US10lb)-65m(70yds). SVS Infinity brake installed. You may cast from 5.0g with this spool without effort.$84.00 -
Avail Microcast AMB3520R finesse spool with 4pt brake
ABU Ambassadeur 3500C Super light weight 6.1g, extra strong duralumin spool 0.205mm(jp6lb)-55m 4pt brake holder installed
-
Avail Microcast SXHS1618R spool for ABU Morrum SX1600C Hi speed
ABU Morrum SX1600C Hi speed Super light weight 6.8g (12.6g genuine spool), extra strong duralumin spool PE#0.6(0.15mm)-80m. Casts great for heavier than 3.5gram, 1/8oz
$80.00 -
Roro BFS Spool DIY ATX27, standard, black, T3 Air, 16Alpahs Air, SS Air Special bargain price sale
You may cast 2g. Ultra light weight 2.25mm ultra shallow tuning spool for Daiwa T3 Air, 16Alphas Air, SS Air, and 18SV Light LTD. 32mm dia, 4.8g(measured without ball bearing) PE#0.8(0.16mm)-100m Fixed brake rotor offer stable brake. NOT fitting to 18 Alphas Air Stream Custom, or 20 Alphas Air TW.
Regular Price: $85.00
Special Price $69.00
-
Avail Macro Cast spool 16ALD15R spool for 16AldebaranBFS
Ultra light weight spool for Shimano16Aldebaran BFS XG (magnet brake model) for the ultimate finesse performance.
16ALD15R spool, 1.5mm deep, 4.9g, (genuine spool 7.7g) Line capacitiy 0.205mm-35m, 0.165mm-45m (Genuine spool 0.235mm-45m)
8pcs of additional neodium magnets, sold separately, are required to use this spool. The shallow spool is far from brake system, and you need to add these 1mm thick magnets to compensate the decreased brake force. -
Daiwa SLPW RCSB HLC1516 G1 Hyper Long Cast spool
Fits to Daiwa 15XX bait casters, including Daiwa 15Zillion TW1516. It also fits to Daiwa 2006-2009Zillion TWS100 export reels. This spool is to cast the longest for heavier than 1/2oz rigs. The brake rotor spring is 4 times stronger than regular spools, making it emitting far less brake force than regular spools. G1 duralumin material is employed. Spool dia 36mm, weight 14g, 0.330mm(JP16lb, US14lb)-100m(110yds).
$92.00 -
Avail Microcast AMB5530C70'S spool Black, Old ABU 5500C 70's
Avail super shallow spool for old ABU 5500C reels in 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5500C sold in 80's or later. Difference is at the genuine spool, and 70's spool has silver plates on both sides, but 80's doesn't have them and it is black spool wall. 0.285mm-75m
$78.00 -
Daiwa SLPW RCSB SV 800S spool, Black, shallow 2022
This shallow SV spool is to improve casting performance of Daiwa Alpahs SV 800 reels. Flat bottom, ultra light-weight 12g spool to improve casting performance especially for ultra light weight rigs 3g-7g 1/8-1/4oz. Casts great for heavier than 3g 1/8oz. 0.285mm(US10lb)-55m(60yds)
$74.00 -
21 Steez A TW HLC mild spool
This modified Magforce Z Boost spool has 0.8mm longer brake rotor installed to emit more brake force than stock spool, and you may cast from 14g 1/2oz easy and long. Fits to Daiwa 21/22 Steez A TW HLC reels.
-->$120.00 -
Daiwa SLPW RCSB MAG-Z Boost 1000S G1 spool, Silver 2023 Oct. Model
This spool is to be used both to cast long, and pitch well. This is a little shallower than Mag-Z Boost 1000 spool. It extends casting distance by reducing brake force at the later half in casting. Fits to Daiwa TW 1000, 1012, 1025 and 1016 reels, T3(all models) and etc. Flat bottom, light-weight 14g spool to improve casting performance especially for relatively heavy rigs of 10g-28g 3/8-1oz, and for pitching in short distance. Made of G1 grade duralumin. In MAGFORCE-Z Boost brake, rotor will pop out far only at the beginning of casting to prevent backlash, and then it retracts to the middle to reduce brake to add casting distance. The second half spring is 4 times stronger than the first half to do the trick. Compared to SV Boost spools, this Magforce-Z Boost spools have more weight, and it is more suitable for heavier rigs. Casts great for heavier than 7g 1/4oz. 0.310mm(US12lb)-100m(110yds)
$96.00
