Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
Shimano
Tuning handles for Shimano casting reels
Handles on this page accept 7mm main shafts, which is employed by all Shimano bait casters 50-400 size, except following reels.
1. Shimano old Bantam reels. Shimano 00/15Conquest 300-400, TE/TE-GT 300-400. They have 8mm shafts. Please pick handles for Daiwa/ABU which accept 8mm shaft, and M8 hooded nut.
2. Calcutta D series 2012- Out side drag model : Please choose specified handles.
For 00Conquest 200 and Calcutta 200TE, please add a 0.5mm washer between handle and star drag. If you are not sure if the tuning parts fit to your tackle, please Email Jun Please refer to here as well. How to change knobs, knob compatibility
-
Avail retainer washer for Avail handles
Black, Gunmetal, Light Chrome, Navy, Blue, Skyblue, Purple, Red, Pink, Orange, Gold, Ch Gold, Brown, Green. This retainer is for Avail tuning handles. It also fits to old Bantam 100, 200 reels. Nut size 10mm
-
Avail nut M7 for Shimano
7mm shaft, 10mm hex for Shimano 50-200 Black, Gunmetal, Light Chrome, Navy, Blue, Skyblue, Purple, Red, Pink, Orange, Gold, Ch Gold, Brown, Green. Champaign Gold matches perfect to Shimano Calcutta reels. Right thread for right hand reel, Left thread for left hand.
-
11mm hex nuts (8mm thread)
11mm hex nuts to fit handles for Conquest 300/400 models onto other reels. 8mm thread.
-
Livre quick change washer 8mm Daiwa/ABU
Bottom washer for Livre and DRT handles to fit to Daiwa/ABU 8mm main shaft. Shimano Conquest 300, 400, Daiwa, and ABU bait casters.
$2.00 -
Livre quick change washer 7mm Shimano
Bottom washer for Livre and DRT handles to fit to Shimano 7mm main shaft. Shimano 50-250 bait casters, CT300, CT400.
$2.00 -
Livre t1.0x phi 17 round washer, Shimano
Livre and DRT handle washer for Shimano, to be placed under handle to adjust gap between handle and star drag. 4mmx7mm
$2.00 -
Livre t1.0x phi 17 round washer, Daiwa
Livre and DRT handle washer for Daiwa, to be placed under handle to adjust gap between handle and star drag. 5mmx8mm hole
$2.00 -
DRT Varial Dish Wheel Cap
Knob caps for DRT Varial handles. 23mm dia. This knob cap fits to the original knobs of Varial 95/100mm handles. Doesn't fit to the original knobs of Varial 87/110/117mm handles, which have 16mm dia knob caps. You may fit DRT Slim/Fat knobs to Varial 87/110/117mm handles by installing this knob caps. 1pc in package.
-
DRT Varial Calform knob, Silver Re-stocked!
Ultra light weight EVA knob. By installing this Calform knob for 2pcs, your Varial 100 handle will be removed weight by 20g. Rim design is from forged aluminum wheels from US. Design disc is in it, to be modified later. Fitting, Shimano A, Daiwa S. 1pc in a package.
$56.00 -
DRT Varial Calform Wheel Cap, Black and Silver
Knob center cap for Varial 95mm, 100mm handles. The same cap as that of DRT Calform knobs. With this cap, you may install regular Slim and Fat knobs to 87mm, 110mm and 117mm handles.
$31.00 -
DRT handle nut 140-150
These are the center handle nuts for DRT Varial handle 140-150 only. Please specify 7mm/8mm shaft size, Right/Left handle, and color. 7mm fits to 50-250 Shimano bait casters. 8mm fits to Daiwa/ABU and Shimano Conquest 300/400 models. Daiwa B1 SCR fits to Daiwa with hex head screw center nuts, for example Steez, Zillion TW, Tatula HD, Ryoga, Z2020
-
DRT EVA Knob SLIM/FAT, replacement EVA 2pcs
Replacement EVA knob for DRT 95/100 handles. SLIM knobs are in the same shape of stock rubber knobs of Varial 95/100 handles. FAT knobs are to add some volume in the knobs for better gripping. Made of hard EVA, but in much lighter weight than stock rubber knobs to remove weight in your DRT Varial handles. You may also fit these SLIM/FAT knobs to your Varial 87, 110 and 117 by installing Dish wheel caps, which has larger dish caps.
-
DRT Varial Knob Slim/Fat, rubber 2pcs
Replacement knob rubber for DRT Varial Custom 95/100 handles. Slim black rubbers are installed to DRT Varial 95/100 handles originally. Doesn't come with metal fixture of knobs, and products are a pair of replacement rubbers. They doesn't fit to any other handle than DRT Varial 95/100.
-
DRT Varial Knob Flat, replacement rubber 2pcs
Replacement large flat knob rubber for DRT Varial Custom 87mm, 110mm and 117mm handles. 2pcs in package. For DRT Varial 95/100 handles, you may install these Flat Knobs by installing MK-1 knob caps. This knob rubber doesn't fit to handles of other brands than DRT.
-
DRT Varial custom handle 95mm, 100mm (without center nut) Special offer!
DRT Varial handles are full machined heavy duty handles for big baits. Handle plate is quite thick 6mm at center to offer SOLID cranking. Stiff rubber knobs are large enough to grip firmly. Accept straight star up to 27mm radius, and sway back star drags. DRT Handle center nut is not included, and please purchase at least one or you may not fit the handle to reels.DRT replacement knob rubber is fitting to these 95mm and 100mm handles. Comes with fitting plates in 7mm and 8mm, a wrench for center nut. Made in Japan
-
DRT EVA Knob J-SLIM, replacement EVA 2pcs
Replacement EVA knob for DRT 87/117 handles. By installing MK-1 wheel, you may fit J-SLIM knobs to your DRT 95mm/100mm handles as well.
-
DRT handle nuts
These are the center handle nuts for DRT Varial handles. DRT Varial handles doesn't come with the center nuts, and you have to pick one from this page to fit the handles to your reel. Please specify 7mm/8mm shaft size, Right/Left handle, and color. 7mm fits to 50-250 Shimano bait casters. 8mm fits to Daiwa/ABU and Shimano Conquest 300/400 models. Daiwa B1 SCR fits to Daiwa with hex head screw center nuts, for example Steez, Zillion TW, Tatula HD, Ryoga, Z2020
-
DRT Varial custom handle 87mm (without center nut) Limited offer!
DRT Varial handles are full machined heavy duty handles for big baits. Handle plate is quite thick 6mm at center to offer SOLID cranking. Stiff rubber knobs are large enough to grip firmly. Accept straight star up to 27mm radius, and sway back star drags. DRT Handle center nut is not included, and please purchase at least one or you may not fit the handle to reels. DRT replacement flat knob rubber is fitting to this 87mm handle. Made in Japan
-
DRT Varial MK-1 Wheel cap
Knob cap for DRT handles. 16mm dia. This knob cap fits to the original knobs of Varial 87/110/117mm handles, which has 16mm knob caps. This cap doesn't fit to the original knobs of Varial 95/100 handles, which have larger 23mm dia knob caps. You may fit DRT Flat knobs, J-Knobs, J-Slim knobs to Varial 95/100 handles by installing this knob caps. 1pc in package.
-
DRT Varial custom handle 110mm flat knob (without center nut) Limited offer
DRT Varial handle is full machined heavy duty handles for big baits. This 110mm version has large DRT flat knobs. Handle plate is quite thick 6mm at center to offer SOLID cranking. Stiff rubber knobs are large enough to grip firmly. Accept straight star up to 27mm radius, and sway back star drags. DRT Handle center nut is not included, and please purchase at least one or you may not fit the handle to reels. You may fit DRT flat knobs to this handle. Comes with fitting plates in 7mm and 8mm, wrench for center nut. Made in Japan
-
Shimano Yumeya 21 Ultra Strong Handle 48 (96mm) BH-1 7mm fit 2021
Custom sway back handle for Shimano 50-250 sized reels, like Antares, Metanium, Scorpion and etc. Large grips offer ultimate power in cranking. 96mm swept, aluminum frame. Comes with a retainer, screw, and two M7 center nuts for R and L.
$92.00 -
DRT Varial custom handle 117mm (without center nut) Limited offer
117mm version DRT Varial is full machined heavy duty handles for big baits. DRT Handle center nut is not included, and please purchase at least one or you may not fit the handle to reels. Handle plate is quite thick 6mm at center to offer SOLID cranking. Stiff rubber knobs are large enough to grip firmly. Accept straight star up to 27mm radius, and sway back star drags. Made in Japan
