Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
Daiwa/ABU
Tuning handles for Daiwa and ABU bait casting reels
Handles on this page accept 8mm main shaft, which is employed on Daiwa and ABU bait casters.Shimano Conquest, TE and TE-GT in 300/301, 400/ 401 have 8mm shaft, and handles on this page fit. Please purchase M8 hooded nut. Shimano stock nut is 11mm hex size and won't fit with the retainers coming with handles.
*1 For Daiwa with 12mm handle screw models, please choose SCR model or purchase either of DS 10mm screw for ZPI handles, or Handle Screw 10mm for other handles. 12mm screws are on: Steez EX100XS/HS, Ryoga JDM, Daiwa-Z JDM, Zillion J Dream, Zillion PESP and etc. Handle is fastened by handle screws with 12mm heads, which do not fit to 10mm retainers of tuning handles.
If you are not sure if the tuning parts fit to your tackle, please Email Jun Please refer to here as well.
How to change knobs, knob compatibility
-
DRT Varial custom handle 95mm, 100mm (without center nut)
DRT Varial handles are full machined heavy duty handles for big baits. Handle plate is quite thick 6mm at center to offer SOLID cranking. Stiff rubber knobs are large enough to grip firmly. Accept straight star up to 27mm radius, and sway back star drags. DRT Handle center nut is not included, and please purchase at least one or you may not fit the handle to reels.DRT replacement knob rubber is fitting to these 95mm and 100mm handles. Comes with fitting plates in 7mm and 8mm, a wrench for center nut. Made in Japan
-
DRT Varial custom handle 117mm (without center nut) Limited offer in stock!
117mm version DRT Varial is full machined heavy duty handles for big baits. DRT Handle center nut is not included, and please purchase at least one or you may not fit the handle to reels. Handle plate is quite thick 6mm at center to offer SOLID cranking. Stiff rubber knobs are large enough to grip firmly. Accept straight star up to 27mm radius, and sway back star drags. Made in Japan
-
Mike's Wood knob single handle for ABU
40mm long, classic looking handle with a rose wood knob. Knob is fastened to shaft with a screw, and you may clean the internal by removing it. Comes with retainer, screw and R nut. Fits to ABU 1500-6600.
$52.00 -
ValleyHill Handle Parts set R
Set of retainer, retainer screw and nut, right R for ABU Ambassadeur 1500-6600 handles.
$6.00 -
ValleyHill Handle Parts set Left
Set of retainer, retainer screw and nut, left L for ABU Ambassadeur 1501-6601 handles.
$6.00 -
Daiwa Star Wrench
This wrench is to fasten star shaped handle nuts of Daiwa bait casters. Pixy (silver, yellow, orange), Presso, Millionaire Kago 300, Millionaire SF reels.
-->$3.00 -
Livre t1.0x phi 17 round washer, Shimano
Livre and DRT handle washer for Shimano, to be placed under handle to adjust gap between handle and star drag. 4mmx7mm
$2.00 -
Livre t1.0x phi 17 round washer, Daiwa
Livre and DRT handle washer for Daiwa, to be placed under handle to adjust gap between handle and star drag. 5mmx8mm hole
$2.00 -
Livre quick change washer 7mm Shimano
Bottom washer for Livre and DRT handles to fit to Shimano 7mm main shaft. Shimano 50-250 bait casters, CT300, CT400.
$2.00 -
DRT Varial custom handle 110mm flat knob (without center nut) Big handle for big swim baits
DRT Varial handle is full machined heavy duty handles for big baits. This 110mm version has large DRT flat knobs. Handle plate is quite thick 6mm at center to offer SOLID cranking. Stiff rubber knobs are large enough to grip firmly. Accept straight star up to 27mm radius, and sway back star drags. DRT Handle center nut is not included, and please purchase at least one or you may not fit the handle to reels. You may fit DRT flat knobs to this handle. Comes with fitting plates in 7mm and 8mm, wrench for center nut. Made in Japan
-
Livre quick change washer 8mm Daiwa/ABU
Bottom washer for Livre and DRT handles to fit to Daiwa/ABU 8mm main shaft. Shimano Conquest 300, 400, Daiwa, and ABU bait casters.
$2.00 -
Avail handle washer for Off-set handle Daiwa 0.5mm
0.5mm handle washer to adjust handle thickness for Avail Off-set handle to be fitted on Daiwa reels with handle screw model, like Steez, Zillion J-Dream, Zillion TW and etc. One washer is enough to adjust for Avail Off-set handle.
$1.00 -
Daiwa Star Nut M8 Left
Daiwa Star Nut Left thread for left hand models. M8. Fits to Daiwa/ABU M8 handle shafts.
$6.00 -
Daiwa Star Nut M8 Right
Daiwa Star Nut right thread, for right hand models. M8. Fits to Daiwa/ABU M8 handle shafts.
$6.00 -
Avail retainer B Type for Avail handles
This retainer is for Avail tuning handles. It also fits to old Bantam 100, 200 reels. Nut size 10mm
-
Avail Retainer 12.5 for ABU 4000-6000
Handle retainer made of aluminum. For most Ambassadeur 4000-6000 size after 1980, with distance between the center of retainer screw and the center of main shaft at 12.5mm. Some old 60's ABU has 10mm retainers.
-
Avail Retainer 9-10 for ABU 1500C, 2500C
Handle retainer made of aluminum. For 1500C and 2500C reels, and for Avail Pure handles. Black, Gunmetal, Silver, Chrome, Blue, Skyblue, Purple, Red, Pink, Orange, Gold, Ch Gold, Brown, Green and Gold plated.
-
Avail nut for ABU/Daiwa M8
8mm shaft, 10mm hex hooded nut for ABU/Daiwa reels for handle Black, Gunmetal, Light Chrome, Navy, Blue, Skyblue, Purple, Red, Pink, Orange, Gold, Ch Gold, Brown, Green. Champaign Gold matches perfect to Shimano Calcutta reels. Right thread for right hand reel, Left thread for left hand.
-
Daiwa Handle Screw 10mm hex
This 10mm head hex screw it to fasten a tuning handle onto Daiwa reels with larger 12mm head screws. Fits to JDM Daiwa Ryoga 1016-2020, JDM Daiwa Z, JDM Daiwa Zillion J Dream and etc. Its head is quite low to fit with retainer washers of tuning handles.
$7.00 -
Livre handle nuts
These are the center nuts for Livre handles. Please specify 7mm/8mm shaft size, Right/Left handle, and color. 7mm fits to 50-250 Shimano bait casters. 8mm fits to Daiwa/ABU and Shimano Conquest 300/400 models. Daiwa B1 SCR fits to Daiwa with hex head scenter crews, for example Steez, Zillion TW, Tatula HD, Ryoga, Z2020. These nuts also fit to DRT handles. CBF nuts are machined more to remove weight.
-
DRT handle nut 140-150
These are the center handle nuts for DRT Varial handle 140-150 only. Please specify 7mm/8mm shaft size, Right/Left handle, and color. 7mm fits to 50-250 Shimano bait casters. 8mm fits to Daiwa/ABU and Shimano Conquest 300/400 models. Daiwa B1 SCR fits to Daiwa with hex head screw center nuts, for example Steez, Zillion TW, Tatula HD, Ryoga, Z2020
-
DRT handle nuts
These are the center handle nuts for DRT Varial handles. DRT Varial handles doesn't come with the center nuts, and you have to pick one from this page to fit the handles to your reel. Please specify 7mm/8mm shaft size, Right/Left handle, and color. 7mm fits to 50-250 Shimano bait casters. 8mm fits to Daiwa/ABU and Shimano Conquest 300/400 models. Daiwa B1 SCR fits to Daiwa with hex head screw center nuts, for example Steez, Zillion TW, Tatula HD, Ryoga, Z2020
-
DRT Varial Calform Wheel Cap, Black and Silver
Knob center cap for Varial 95mm, 100mm handles. The same cap as that of DRT Calform knobs. With this cap, you may install regular Slim and Fat knobs to 87mm, 110mm and 117mm handles.
$31.00
