You have no items in your shopping cart.
You have no items to compare.
Fits to reels with sway back drag wheel. Daiwa Zillion, Steez. For other Daiwa models, please purchase sway back star drags. Comes with 4 ball bearings, black retainer and screw. Accept Daiwa S knobs.
8mm shaft, 10mm hex hooded nut for ABU/Daiwa reels for handle Black, Gunmetal, Light Chrome, Navy, Blue, Skyblue, Purple, Red, Pink, Orange, Gold, Ch Gold, Brown, Green. Champaign Gold matches perfect to Shimano Calcutta reels. Right thread for right hand reel, Left thread for left hand.
Sway back, Extra Super Duralumin(ESD) handle frame fitting to 8mm shaft reels, almost all Daiwa/ABU bait casters. It is very strong and super light weight. 85, 90, 95, 100, 105mm, weight 13.2g 100mm. Color: Champaign gold, gunmetal, black. Fits to ABU and Daiwa with sway-back star drags. Accept both Daiwa S and Shimano A knobs. 85mm and 90mm are STi2.5 with light-weight duralumin knob shafts. 95-105mm handles are Sti2 with sturdy titanium knob shafts. Comes with a retainer in the same color as handle frame, and a retainer screw.
90mm swept, machined aluminum frame, titanium knobs All Daiwa and ABU bait casters.*1 No sway back star drag needed. Please specify right, left or SCR. For Daiwa reels with handle locking screw, instead of nut, should choose SCR. For Ex., Ryoga, Z, Zillion special models, Steez, Zillion TW and etc.
Replacement knob rubber for DRT Varial Custom 95/100 handles. Slim black rubbers are installed to DRT Varial 95/100 handles originally. Doesn't come with metal fixture of knobs, and products are a pair of replacement rubbers. They doesn't fit to any other handle than DRT Varial 95/100.
7mm shaft, 10mm hex for Shimano 50-200 Black, Gunmetal, Light Chrome, Navy, Blue, Skyblue, Purple, Red, Pink, Orange, Gold, Ch Gold, Brown, Green. Champaign Gold matches perfect to Shimano Calcutta reels. Right thread for right hand reel, Left thread for left hand.
Black, Gunmetal, Light Chrome, Navy, Blue, Skyblue, Purple, Red, Pink, Orange, Gold, Ch Gold, Brown, Green. This retainer is for Avail tuning handles. It also fits to old Bantam 100, 200 reels. Nut size 10mm
90mm swept, aluminum billet frame, titanium knobs. All Shimano bait casters 50-250. Calcutta CT50-400 No sway back star drag needed. Red, Blue and Gold. Please specify right or left.
Heavy duty handle made of air craft duralumin.. Fits to reels with sway back star drag. Daiwa Zillion、 Steez、 SS、 T3MX、 PX68 and etc. EVA form rubber knob keep grip when they are wet. 4 CRBB ball bearings installed. Comes with retainer、 washers、 screws and nut for R/L.
0.5mm handle washer to adjust gap between handle and star drag, for Shimano. To install Avail ESD STi2 handle.
100mm long power handle with power knobs. Swept, machined aluminum frame, titanium knobs All Daiwa and ABU bait casters.*1 No sway back star drag needed. Please specify right, left or SCR. For Daiwa reels with handle locking screw, instead of nut, should choose SCR. For Ex., Ryoga, Z, Zillion special models, Steez, Zillion TW and etc. Suitable for Daiwa 300-ABU6500 sized reels.
0.5mm handle washer to adjust handle thickness for Avail Off-set handle to be fitted on Daiwa reels with handle screw model, like Steez, Zillion J-Dream, Zillion TW and etc. One washer is enough to adjust for Avail Off-set handle.
85mm flat frame Carbon Fiber Handle. 25 g. The EVA knobs will stay warm to the touch in colder temperatures and are really easy to grab. Each knob spins on two stainless steel ball bearings....four in total. The carbon handle shank measures over 1/8" thick (3.66mm) and is really stiff. The place on the shank where the nut sits is bored out a bit to allow the nut extra threads to grab onto. Comes with right handle nut, and locking screw. For left hand reels, please purchase an M8 hooded nut for left hand separately if you don't have it.
Fits to reels with sway back star drags. Daiwa Zillion, Steez and etc. Please purchase sway back star drags for the reels with straight arm star drags. Comes with 4 ball bearings, a black retainer and a screw. Accept Daiwa S knobs.
Shimano CT200 ball bearing installed handle. 84mm. No retainer or screw included.
These are the center handle nuts for DRT Varial handles. DRT Varial handles doesn't come with the center nuts, and you have to pick one from this page to fit the handles to your reel. Please specify 7mm/8mm shaft size, Right/Left handle, and color. 7mm fits to 50-250 Shimano bait casters. 8mm fits to Daiwa/ABU and Shimano Conquest 300/400 models. Daiwa B1 SCR fits to Daiwa with hex head screw center nuts, for example Steez, Zillion TW, Tatula HD, Ryoga, Z2020
This 10mm head hex screw it to fasten a tuning handle onto Daiwa reels with larger 12mm head screws. Fits to JDM Daiwa Ryoga 1016-2020, JDM Daiwa Z, JDM Daiwa Zillion J Dream and etc. Its head is quite low to fit with retainer washers of tuning handles.
Power gripping 102mm swept, aluminum frame, EVA knob handle. All Shimano bait casters 50-250. Calcutta CT50-400. Swept star drag needed. Comes with retainer and screw. No handle nut is included.
40mm long, classic looking handle with a rose wood knob. Knob is fastened to shaft with a screw, and you may clean the internal by removing it. Comes with retainer, screw and R nut. Fits to ABU 1500-6600.
80mm long, classic looking handle with rose wood knobs. Knobs are fastened to shafts with screws, and you may clean the internal by removing them. Comes with retainer, screw and R nut. Fits to ABU 1500-6600.
80mm long, classic looking handle with rose wood knobs. Knobs are fastened to shafts with screws, and you may clean the internal by removing them. Comes with retainer, screw and R nut. Fits to ABU 1500-6600.
Daiwa Star Nut right thread, for right hand models. M8. Fits to Daiwa/ABU M8 handle shafts.
11mm hex nuts to fit handles for Conquest 300/400 models onto other reels. 8mm thread.
Single Power handle for Shimano 15/18 Conquest 300/301/400/401, 00 Conquest 300/400/401, Calcutta TE(TE-GT)300/400/401. This 70mm long power handle has an ergo grip, and the long arm allows you smooth strong cranking. Kit includes handle, right nut, a retainer washer and a screw. 2 Ball bearings installed. Dimensions: 8mm shaft, 11mm hex nut. You may fit this power handle to other Shimano, Daiwa and ABU reels with 8mm main shaft.