Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
Handles, casting reels
-
DRT Varial Knob Slim/Fat, rubber 2pcs
Replacement knob rubber for DRT Varial Custom 95/100 handles. Slim black rubbers are installed to DRT Varial 95/100 handles originally. Doesn't come with metal fixture of knobs, and products are a pair of replacement rubbers. They doesn't fit to any other handle than DRT Varial 95/100.
-
Avail nut M7 for Shimano
7mm shaft, 10mm hex for Shimano 50-200 Black, Gunmetal, Light Chrome, Navy, Blue, Skyblue, Purple, Red, Pink, Orange, Gold, Ch Gold, Brown, Green. Champaign Gold matches perfect to Shimano Calcutta reels. Right thread for right hand reel, Left thread for left hand.
-
Avail retainer B Type for Avail handles
This retainer is for Avail tuning handles. It also fits to old Bantam 100, 200 reels. Nut size 10mm
-
Avail handle washer for Off-set handle Daiwa 0.5mm
0.5mm handle washer to adjust handle thickness for Avail Off-set handle to be fitted on Daiwa reels with handle screw model, like Steez, Zillion J-Dream, Zillion TW and etc. One washer is enough to adjust for Avail Off-set handle.
$1.00 -
Daiwa large knob 100mm sway back Black handle
100mm light weight duralumin handle with large knobs for power cranking. Comes with retainer and screw. Fits to all Daiwa and ABU bait casters.*1 Handle frame is sway back and requires sway back star drag, or star will contact to the handle. You may change the knobs. 2 ball bearings installed (1 ball bearing per 1 knob)
-->$71.00 -
Daiwa Seaborg 63mm single power handle kit
63mm long single power handle with 45mm dia large knob for Daiwa/ABU bait casters, and 00/15Shimano Conquest 300/400. 2 ball bearing installed. Fits to reels with 8mm shafts. Comes with two nuts (R and L) and cover cap. Best for Millionaire 300, ABU 6500/6600 and Conquest 400. Accepts sway back star drag, and straight shaped star drags of up to 50mm diameter, fine for most ABU 1500-6600 and Daiwa.
$58.00 -
DRT Varial custom handle 95mm, 100mm (without center nut) Special offer! Gunmetal handles in!
DRT Varial handles are full machined heavy duty handles for big baits. Handle plate is quite thick 6mm at center to offer SOLID cranking. Stiff rubber knobs are large enough to grip firmly. Accept straight star up to 27mm radius, and sway back star drags. DRT Handle center nut is not included, and please purchase at least one or you may not fit the handle to reels.DRT replacement knob rubber is fitting to these 95mm and 100mm handles. Comes with fitting plates in 7mm and 8mm, a wrench for center nut. Made in Japan
-
DRT Varial custom handle 117mm (without center nut) Limited offer in stock! April 23, 2024
117mm version DRT Varial is full machined heavy duty handles for big baits. DRT Handle center nut is not included, and please purchase at least one or you may not fit the handle to reels. Handle plate is quite thick 6mm at center to offer SOLID cranking. Stiff rubber knobs are large enough to grip firmly. Accept straight star up to 27mm radius, and sway back star drags. Made in Japan
-
Shimano CT200 ball bearing handle
Shimano CT200 ball bearing installed handle. 84mm. No retainer or screw included.
$55.00 -
DRT handle nuts
These are the center handle nuts for DRT Varial handles. DRT Varial handles doesn't come with the center nuts, and you have to pick one from this page to fit the handles to your reel. Please specify 7mm/8mm shaft size, Right/Left handle, and color. 7mm fits to 50-250 Shimano bait casters. 8mm fits to Daiwa/ABU and Shimano Conquest 300/400 models. Daiwa B1 SCR fits to Daiwa with hex head screw center nuts, for example Steez, Zillion TW, Tatula HD, Ryoga, Z2020
-
Daiwa Handle Screw 10mm hex
This 10mm head hex screw it to fasten a tuning handle onto Daiwa reels with larger 12mm head screws. Fits to JDM Daiwa Ryoga 1016-2020, JDM Daiwa Z, JDM Daiwa Zillion J Dream and etc. Its head is quite low to fit with retainer washers of tuning handles.
$7.00 -
Shimano 102mm Power Handle Kit, Red, EVA knobs (16EN100PG)
Power gripping 102mm swept, aluminum frame, EVA knob handle. Fits to Shimano bait casters 50-250 with swept star drags. Comes with retainer and screw. No handle nut is included.
$99.00 -
Mike's Wood knob single handle for ABU
40mm long, classic looking handle with a rose wood knob. Knob is fastened to shaft with a screw, and you may clean the internal by removing it. Comes with retainer, screw and R nut. Fits to ABU 1500-6600.
$52.00 -
Daiwa Star Nut M8 Right
Daiwa Star Nut right thread, for right hand models. M8. Fits to Daiwa/ABU M8 handle shafts.
$6.00 -
11mm hex nuts (8mm thread)
11mm hex nuts to fit handles for Conquest 300/400 models onto other reels. 8mm thread.
-
Shimano Conquest 300/400 Ergo Power Handle Kit OC300PG
Single Power handle for Shimano 15/18 Conquest 300/301/400/401, 00 Conquest 300/400/401, Calcutta TE(TE-GT)300/400/401. This 70mm long power handle has an ergo grip, and the long arm allows you smooth strong cranking. Kit includes handle, right nut, a retainer washer and a screw. 2 Ball bearings installed. Dimensions: 8mm shaft, 11mm hex nut. You may fit this power handle to other Shimano, Daiwa and ABU reels with 8mm main shaft.
$75.00 -
Shimano Conquest 300/400 Power Handle Kit OC300HG
Single Power handle for Shimano 15/18 Conquest 300/301/400/401, 00 Conquest 300/400/401, Calcutta TE(TE-GT)300/400/401. This 70mm long power handle has egg shaped large knob for better grip, and the long arm allows you smooth strong cranking. Kit includes handle, right nut, a retainer washer and screw. 2 Ball bearings installed. Dimensions: 8mm shaft, 11mm hex nut. You may fit this power handle to other Shimano, Daiwa and ABU reels with 8mm main shaft.
$63.00 -
DRT Varial custom handle 87mm (without center nut) Limited offer!
DRT Varial handles are full machined heavy duty handles for big baits. Handle plate is quite thick 6mm at center to offer SOLID cranking. Stiff rubber knobs are large enough to grip firmly. Accept straight star up to 27mm radius, and sway back star drags. DRT Handle center nut is not included, and please purchase at least one or you may not fit the handle to reels. DRT replacement flat knob rubber is fitting to this 87mm handle. Made in Japan
-
Daiwa Star Nut M8 Left
Daiwa Star Nut Left thread for left hand models. M8. Fits to Daiwa/ABU M8 handle shafts.
$6.00 -
Daiwa EVA knob 100mm sway back handle Red
100mm light weight duralumin handle with EVA knobs for power cranking. Comes with retainer and screw. Fits to all Daiwa and ABU bait casters.*1 Handle frame is sway back and requires sway back star drag, or star will contact to the handle.
$65.00 -
Livre Crank Feather90 Shimano Ultra light weight machine-cut handle. It would take about a week to be ready.
90mm swept, aluminum billet frame, titanium knobs. All Shimano bait casters 50-250. Calcutta CT50-400 No sway back star drag needed. Red, Blue and Gold. Please specify right or left.
