Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
Handles, casting reels
-
DRT Varial Dish Wheel Cap
Knob caps for DRT Varial handles. 23mm dia. This knob cap fits to the original knobs of Varial 95/100mm handles. Doesn't fit to the original knobs of Varial 87/110/117mm handles, which have 16mm dia knob caps. You may fit DRT Slim/Fat knobs to Varial 87/110/117mm handles by installing this knob caps. 1pc in package.
-
DRT Varial Calform Wheel Cap, Black and Silver
Knob center cap for Varial 95mm, 100mm handles. The same cap as that of DRT Calform knobs. With this cap, you may install regular Slim and Fat knobs to 87mm, 110mm and 117mm handles.
$31.00 -
DRT EVA Knob J-SLIM, replacement EVA 2pcs
Replacement EVA knob for DRT 87/117 handles. By installing MK-1 wheel, you may fit J-SLIM knobs to your DRT 95mm/100mm handles as well.
-
DRT EVA Knob SLIM/FAT, replacement EVA 2pcs
Replacement EVA knob for DRT 95/100 handles. SLIM knobs are in the same shape of stock rubber knobs of Varial 95/100 handles. FAT knobs are to add some volume in the knobs for better gripping. Made of hard EVA, but in much lighter weight than stock rubber knobs to remove weight in your DRT Varial handles. You may also fit these SLIM/FAT knobs to your Varial 87, 110 and 117 by installing Dish wheel caps, which has larger dish caps.
-
Shimano Yumeya 21 Ultra Strong Handle 55 (110mm) BH-2 8mm fit
Custom sway back handle for Shimano 8mm shaft reels, like Conquest 300/400, Scorpion MD300, and etc. Large grips offer ultimate power in cranking. 110mm swept, aluminum frame. You may fit this power handle to Daiwa and ABU reels with 8mm main shaft. Comes with a retainer, screw, and two M8 center nuts for R and L. Center nuts are 11mm hex.
-->$83.00 -
DRT handle nut 140-150
These are the center handle nuts for DRT Varial handle 140-150 only. Please specify 7mm/8mm shaft size, Right/Left handle, and color. 7mm fits to 50-250 Shimano bait casters. 8mm fits to Daiwa/ABU and Shimano Conquest 300/400 models. Daiwa B1 SCR fits to Daiwa with hex head screw center nuts, for example Steez, Zillion TW, Tatula HD, Ryoga, Z2020
-
Avail Retainer 12.5 for ABU 4000-6000
Handle retainer made of aluminum. For most Ambassadeur 4000-6000 size after 1980, with distance between the center of retainer screw and the center of main shaft at 12.5mm. Some old 60's ABU has 10mm retainers.
-
Avail Retainer 9-10 for ABU 1500C, 2500C
Handle retainer made of aluminum. For 1500C and 2500C reels, and for Avail Pure handles. Black, Gunmetal, Silver, Chrome, Blue, Skyblue, Purple, Red, Pink, Orange, Gold, Ch Gold, Brown, Green and Gold plated.
-
Livre SB 70-75 single power handle
70-75mm single power handle with counter balancer. You may change length 70 or 75 by changing the direction of center spacer. Machined aluminum frame and EP41mm dia titanium knob. Matches with sway back star drag reels, and straight star of up to 27mm radius.
Daiwa B1 SCR fits to Daiwa with hex head screw center nuts, like Steez, Zillion TW, and Tatula HD. Daiwa B2 fits to 15Saltiga 10-35 Japan models (not listed and please email for them) It would take about a week to be shipped -
Livre SB 65-70 single power handle
65-70mm single power handle with counter balancer. You may change length 65 or 70 by changing the direction of center spacer. Machined aluminum frame and EP41mm dia titanium knob. Matches with sway back star drag reels, and straight star of up to 27mm radius.
Daiwa B1 SCR fits to Daiwa with hex head screw center nuts, like Steez, Zillion TW, and Tatula HD. Daiwa B2 fits to 15Saltiga 10-35 Japan models (not listed and please email for them) It would take about a week to be shipped -
DRT Varial MK-1 Wheel cap
Knob cap for DRT handles. 16mm dia. This knob cap fits to the original knobs of Varial 87/110/117mm handles, which has 16mm knob caps. This cap doesn't fit to the original knobs of Varial 95/100 handles, which have larger 23mm dia knob caps. You may fit DRT Flat knobs, J-Knobs, J-Slim knobs to Varial 95/100 handles by installing this knob caps. 1pc in package.
-
Daiwa Seaborg 70mm single power handle kit 300MJ New release single power handle
70mm long single power handle with 44mm dia large knob for Daiwa/ABU bait casters, and Shimano Conquest 300/400. 2 ball bearing installed. Comes with R nut and nut cover. Best for Millionaire 300, ABU 6500/6600 and Conquest 400/401. For left hand reels, Daiwa Hooded Nut M8 Left is required. Accepts sway back star drag and straight shaped star drags of up to 60mm diameter, fine for most ABU 1500-6600 and Daiwa.
$65.00 -
Livre Crank 100 Daiwa handle It would take about a week to be ready.
100mm long power handle with power knobs. Swept, machined aluminum frame, titanium knobs All Daiwa and ABU bait casters.*1 No sway back star drag needed. Please specify right, left or SCR. For Daiwa reels with handle locking screw, instead of nut, should choose SCR. For Ex., Ryoga, Z, Zillion special models, Steez, Zillion TW and etc. Suitable for Daiwa 300-ABU6500 sized reels.
-
Avail handle washer for ESD STi2 for Shimano
0.5mm handle washer to adjust gap between handle and star drag, for Shimano. To install Avail ESD STi2 handle.
$63.00 -
Avail Off-set handle ESD STi2, STi2.5 for Shimano 7mm
Sway back, Extra Super Duralumin(ESD) handle frame fitting to Shimano bait casters with swept star drags. It is very strong and super light weight. 85, 90, 95, 100, 105mm, weight 13.2g 100mm. Color: Champaign gold, gunmetal, black. Fits to: Shimano 50-250 reels. For some straight star drag reels, please purchase additional 0.5mm washers to prevent star contacting with the handle frame. It is listed at the end of this handle listing. Accept both Daiwa S and Shimano A knobs. 85mm and 90mm are STi2.5 with light-weight ESD duralumin knob shafts. 95-105mm handles are Sti2 with sturdy titanium knob shafts. Retainer washer in the same color as handle frame and screws included.
-
Avail Power Handle T4S ESD 100, 110mm
Machined 4mm thick frame made of air craft grade alloy, Extra Super Duralumin, installed with machine-cut titanium knob shafts, the Avail Power Handle T4S is the piece of craftsman-ships with sturdiness. All Daiwa and ABU 1500-6600 bait casters. Comes with retainer and screw. 100mm, 110mm. Best suitable for ABU6500CS Rocket. Accept Daiwa S, Shimano A, knobs
-
Daiwa Millionaire300SF handle kit, right
55mm long single power handle with large T knob for Daiwa/ABU bait casters. Fits to Right hand reels. Comes with a nut(R), retainer and screw. Best for Millionaire 300 and ABU 6500/6600. Daiwa star wrench is required to turn nuts. For left hand reels, Daiwa Star Nut M8 Left is required.
$50.00 -
Daiwa Kago300 single handle kit, Right
55mm long single power handle with EVA knob for Daiwa/ABU bait casters with sway back star drag. 2 ball bearing installed. Fits both to Right hand reels. Comes with a nut (R), retainer and screw. Best for Millionaire 300 and ABU 6500/6600. Daiwa star wrench is required to turn nuts. For left hand reels, Daiwa Star Nut M8 Left is required.
Handle is swayed. Accepts sway back star drag, and straight shaped star drags of up to 23mm radius.$90.00 -
Avail GM Aluminum knob caps
Fits only to Avail knobs. Black, red, blue, gunmetal, light chrome, navy, purple, orange, green, gold, champaign gold, pink, skyblue
-
Avail nut for ABU/Daiwa M8
8mm shaft, 10mm hex hooded nut for ABU/Daiwa reels for handle Black, Gunmetal, Light Chrome, Navy, Blue, Skyblue, Purple, Red, Pink, Orange, Gold, Ch Gold, Brown, Green. Champaign Gold matches perfect to Shimano Calcutta reels. Right thread for right hand reel, Left thread for left hand.
-
Avail Off-set handle ESD STi2 for Daiwa 8mm
Sway back, Extra Super Duralumin(ESD) handle frame fitting to 8mm shaft reels, almost all Daiwa/ABU bait casters. It is very strong and super light weight. 85, 90, 95, 100, 105mm, weight 13.2g 100mm. Color: Champaign gold, gunmetal, black. Fits to ABU and Daiwa with sway-back star drags. Accept both Daiwa S and Shimano A knobs. 85mm and 90mm have light-weight ESD duralumin knob shafts. 95-105mm handles have sturdy titanium knob shafts. Comes with a retainer in the same color as handle frame, and a retainer screw.
-
Livre Crank Feather90 Daiwa Ultra light weight machine-cut handle. It would take about a week to be ready.
90mm swept, machined aluminum frame, titanium knobs All Daiwa and ABU bait casters.*1 No sway back star drag needed. Please specify right, left or SCR. For Daiwa reels with handle locking screw, instead of nut, should choose SCR. For Ex., Ryoga, Z, Zillion special models, Steez, Zillion TW and etc.
