Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
Tuning Parts
-
Daiwa SLPW Power Square Cork knob
Super light weight, bare compressed cork knob. 7g Fitting: Daiwa S All bait casters, except large conventional reels
$24.00 -
Smoooooth Drag Carbontex Drag kit Daiwa Zillion
Ultra smooth carbontex drag washers. Set of 4 washers. Team Daiwa Zillion 100(H, PA, SHSA, SHA, HSHR, 2006-2013 modes, not TW) Coastal 100HSA, Steez 100/103(2006-2014 model, 100SHA,103SHA, EX100HX, EX100HS, EX100H, Limited-TN, Limited-SV, not TW). Daiwa part #'s G86-3501, G79-1401(X2), G71-1101.
$10.50 -
Smoooooth Drag Carbontex Drag kit Calcutta CT100
Ultra smooth carbontex drag washers. Gear inner washer dia 25.0mm. Set of 2 washers. Fits the following reels :CALCUTTA 100, 150, 100B, CARDIFF 100, 200, 300, CURADO Bantam 200B3.8, CALYX 100A
$6.00 -
Smoooooth Drag Carbontex Drag kit Calcutta CT200
Ultra smooth carbontex drag washers. Gear inner washer dia 26.5mm. Set of 2 washers. Fits : Calcutta 200, 250 except TE or D. Calcutta TE50GT, Curado 200B, Chronarch 100(original A, SF) Castaic200, Citica 200B, Bantam 50, Curado 200(original), Ch50MG, Bantam 1500LC, Calais/Antares 200(1997-2011), Curado 100(B, D, DSV), Citica 100DSV, Chronarch 100MG, old Bantam 400
$8.00 -
Smoooooth Drag Carbontex Drag kit for Calcutta D
Ultra smooth carbontex drag washers. Set of 4 washers. Fits: Calcutta 200D 300D and 400D.
$8.00 -
Smoooooth Drag Carbontex Drag kit for Caltutta TE100DC
Ultra smooth carbontex drag washers. Gear inner washer dia 31.5mm. Set of 2 washers. Fits the following reels :Calcutta TE100(original, DC)/Conquest 100('00 original, '05DC, '14 low gear model only), C03alais 100A/Antares AR, Curado 200E5, Chronarch 100D5.
$8.00 -
Smoooooth Drag Carbontex Drag kit for Caltutta TE200
Ultra smooth carbontex drag washers. Gear inner washer dia 32.5mm. Set of 2 washers. Fits :Calcutta TE/Conquest200('00 original, '05DC, '00GT, '14 low gear model only), TE/Conquest250(original, DC), 16Curado (50E, 200E), 10Scorpion XT(1000, 1500), 11ScorpionDC, 12Aldebaran BFS, 15Aldebaran Ltd. 14Brenius, Core 50MG/09Aldebaran, Citica 200E, Chronarch 200E.
$8.00 -
Shimano 15/18Conquest 300/400/301/401 4.8 power gear kit
4.8:1 power gear kit for Shimano 15/18Conquest 300/301/400/401 reels. 15 models are 5.6:1 gear, 18 models are 6.2:1 geared. With this power gear kit your reel will have 15% and 23% more cranking power respectively. Drag capacity will be souped up from 7kg to 8kg. Kit comes with the pinion, the drive gear and the ear washer from Shimano 16 Ocea Conquest 300PG/301PG. For details, please refer to this page how to install gears to 14/15 Conquest reels
-
Avail Microcast spools 14CNQ1024RI 14Conquest 100/101
Shimano Calcutta 14Conquest 100/101/100HG/101HG (year 2014-,2015- model) No brake holder included. Please use SVS from original spool, and Avail SVS puller 4 in white is helpful.. Work with Magnet brake Avail ALD15, and you may adjust magnet brake with the dial. Casts great for heavier than 4g. 0.235mm-65m/70yds 10.2g You may use this spool with Avail magnet brake ALD15
-
Shimano 15 Calcutta Conquest 300/400/301/401 6.2 high gear kit
6.2:1 high gear kit for Shimano 15Conquest 300/301/400/401, all 5.6:1 gear reels. With this high gear kit your reel will have 11% faster cranking speed. Please refer to this page how to install gears to 14/15 Conquest reels
-
Shimano Yumeya Alumi Round Knob A, Black/Gold S (Shimano A fitting)
Light weight machined aluminum knob 33.5mm dia, 19g. Fitting: Shimano A Fits to Shimano spinning 1000-4000 and etc.
$48.00 -
Mike's Ceramic ball hybrid bearing kit ABEC7, 4x10x4, 4x10x4
ABEC7 class precision bearings with ceramic balls to accelarate fast. Suitable for long distance casting, and casting for light rigs. 2pcs of 4x10x4 bearings.
$20.00 -
Mike's Wood knob single handle for ABU
40mm long, classic looking handle with a rose wood knob. Knob is fastened to shaft with a screw, and you may clean the internal by removing it. Comes with retainer, screw and R nut. Fits to ABU 1500-6600.
$52.00 -
Owner SBL-37M Fine wire single barbless hooks for minnows and cranks
Fine wire hooks, great for trout, perch and other freshwater/saltwater games. Barbless, ultra sharp hook points. Hook surface is coated with fluorine to remove any friction in penetrating jaws with the least power. Eyes are flat to hooks and it matches to minnows at belly eyes. Recommended for up to 1kg/2lb fish, with 1-4lb test mono lines. Matches well to up to 40mm minnow #10, 45mm #8, 50mm #6, 60mm #4.
-
Owner SBL-47 Fine wire single barbless hooks
Fine wire hooks, great for trout, perch and other freshwater/saltwater games. Barbless, ultra sharp hook points. Hook surface is coated with fluorine to remove any friction in penetrating jaws with the least power. Recommended for up to 1.5kg/3lb fish, with 3-6lb test mono lines. Matches well to spoons of 1.0-1.2g #10, 1.5-2.0g #8, 2.2-3.5 #6, 4-5g #4.
-
Owner SBL-51 Medium wire single barbless hooks
Medium wire hooks, great for trout, perch and other freshwater/saltwater games. Barbless, ultra sharp hook points. Recommended for up to 2kg/4lb fish, with 4-8lb test mono lines. Matches well to spoons of 1.5-2.0g #8, 2.2-3.5 #6, 4-5g #4.
-
Owner S-61 Medium heavy wire single hooks
Medium heavy wire hooks, great for steelhead, large trout and other freshwater/saltwater games. Ultra sharp hook points are bent inside like circle hooks to prevent snags. Recommended for up to 4.5kg/10lb fish, with 10-16lb test mono lines. Matches well to spoons of 5-8g #2, 12-15g #1/0, 17-20g #3/0, 25-30g #5/0.
-
Owner SBL-67 Medium heavy wire single hooks
Medium heavy wire hooks, great for steelhead, large trout and other freshwater/saltwater games. Barbless ultra sharp hook points. Recommended for up to 4.5kg/10lb fish, with 10-16lb test mono lines. Matches well to spoons of 2-3g #6, 3.5-4.5g #4, 5-8g #2. SBL-67 has straight hook points.
-
Shimano 102mm Power Handle Kit, Red, EVA knobs (16EN100PG)
Power gripping 102mm swept, aluminum frame, EVA knob handle. Fits to Shimano bait casters 50-250 with swept star drags. Comes with retainer and screw. No handle nut is included.
$99.00 -
Daiwa Handle Screw 10mm hex
This 10mm head hex screw it to fasten a tuning handle onto Daiwa reels with larger 12mm head screws. Fits to JDM Daiwa Ryoga 1016-2020, JDM Daiwa Z, JDM Daiwa Zillion J Dream and etc. Its head is quite low to fit with retainer washers of tuning handles.
$7.00 -
Avail Magnet brake MB-ALD15K
This is the magnet brake system working with Avail ALD1532RI tuning spools for Shimano 15Aldebaran 50/51. You may adjust the brake strength by the dial on the Aldebaran. To install the magnet brake, please click the product name and check how to install it to the reel. It will not work with genuine spool of the Aldebaran 50 reels, or BFS models. It is only for Avail tuning spool ALD1532RI.
$21.00 -
Owner SBL-55M Medium wire single barbless hooks for minnows and cranks
Medium wire hooks, great for trout, perch and other freshwater/saltwater games. Barbless, ultra sharp hook points. Eyes are flat to hooks and they matches to minnows at belly eyes. Recommended for up to 2kg/4lb fish, with 4-8lb test mono lines. Matches well to up to 40mm minnow #10, 45mm #8, 50mm #6, 60mm #4.
-
ABU brake blocks 2 pcs 22565
ABU bakelite brake blocks for 4500C-6600C with 2 pt brakes. Jun's tips. You may make similar brake blocks by cutting old fishing rod tips. Grass rod is better than carbon for more brake.
$3.00 -
Smoooooth Drag Carbontex Drag kit for Calcutta CT400
Ultra smooth carbontex drag washers. Set of 4 washers. Fits the following reels :Calcutta 400, 400S, 400B, 400BSV, Corsair 400 (silver) Corsair 200-400A (gold) Corvalus 400, Triton 100G, 200G Titanos Tanatoru 5000 (grey colored Japanese Market reel)
$9.00
