Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
-
- Spools, casting reels (64)
- Handles, casting reels (66)
- Handle knobs (60)
- Gears, brakes, level winders (78)
- Ball bearings, Pin remover (7)
- Spools, spinning reels (26)
- Handles, spinning reels (12)
- Frames, plates, star drag, colored parts (33)
- Drag washers (30)
Tuning Parts
-
ValleyHill Handle Parts set R
Set of retainer, retainer screw and nut, right R for ABU Ambassadeur 1500-6600 handles.
$6.00 -
ValleyHill Handle Parts set Left
Set of retainer, retainer screw and nut, left L for ABU Ambassadeur 1501-6601 handles.
$6.00 -
ValleyHill 2BB cross bar 2500
2 ball bearing level winder system for ABU 2500C, 2501C, 2600C, 2601C and 3500C. Another ball bearing is inside the black plastic part. You may access to the bearing by unscrewing the screw on the gear. For 70's old 2500C, the black part should be cut to fit into the plate. Photo attached.
$37.00 -
ValleyHill 2BB cross bar 1500
2 ball bearing level winder system for ABU 1500C, 1600C. Another ball bearing is inside the black plastic part. You may access to the bearing by unscrewing the screw on the gear. For 70's reels, the black parts should be cut to fit. Photo attached.
$37.00 -
Roro Ceramic ball bearings
Super performance bearings for bait casting reels. Bearing balls are made of ceramics to remove weight. Outer and inner laces are made of stainless steel. 3 models are listed, Red BFS 1-10g, Red BFS 1-15g and Silver Regular bearings. Red BFS bearings are assembled with small bearings with red aluminum collar to remove weight from inner spinning part. Due to the small bearing installed, suitable casting weights are limited to 10g for Red BFS. Silver Regular models are simple ceramic ball bearings without red housing.
-
Avail spool cog gear 10255 black
This is the replacement of ABU #10255 and 1152469 spool cog for 2500C.
$12.00 -
Shimano 90mm handle kit, straight frame, EVA knobs, 11SaltyOneHG
Shimano replacement handle with straight frame. Fits to reels with straight (not sway-back style) star drags. 90mm. Main shaft 7mm, fits to Shimano bait casting reels 50-250. Comes with R handle nut, retainer and screw.
$50.00 -
Livre t1.0x phi 17 round washer, Shimano
Livre and DRT handle washer for Shimano, to be placed under handle to adjust gap between handle and star drag. 4mmx7mm
$2.00 -
Livre t1.0x phi 17 round washer, Daiwa
Livre and DRT handle washer for Daiwa, to be placed under handle to adjust gap between handle and star drag. 5mmx8mm hole
$2.00 -
Avail aluminum alloy 2BB worm shaft 1500C, WS-15C-2BB-S 2025 New version!
This is the 2 ball bearing installed compatible level winder worm shaft of ABU 1500C, made by aluminum alloy to remove weight. This new version has a screw fastening the gear to the shaft, and you may change ball bearing at the shaft. Fits to 1500C, 1600C, 1601C with metal cup washer at level winders. Doesn't fit to the oldest models without the metal cup washer. 4.1g (genuine worm shaft 5.6g) Ball bearings removes friction in rotation drastically. Plastic part is made of Duracon POM to offer friction-less operation.
$43.00 -
Avail aluminum worm shaft 1500C
This is the compatible level winder worm shaft of ABU Ambassadeur 1500C, made of aluminum alloy to remove weight. Fits to 1500C, 1600C, 1601C. 2.2g (genuine worm shaft 5.6g) Plastic part is made of Duracon POM to offer friction-less operation.
$24.00 -
Avail aluminum alloy level wind pipe 1500C
This is the compatible level winder pipe of ABU 1500C, made by aluminum alloy to remove weight. Fits to 1500C, 1600C, 1601C. 1.0g (genuine pipe 3.1g)
$11.00 -
Avail aluminum alloy level wind pipe 2500C
This is the compatible level winder pipe of ABU 2500C, made by aluminum alloy to remove weight. Fits to 2500C, 2501C, 2600C, 2601C. 1.1g (genuine pipe 3.2g)
$11.00 -
Avail Microcast AMB3520R finesse spool with 4pt brake
ABU Ambassadeur 3500C Super light weight 6.1g, extra strong duralumin spool 0.205mm(jp6lb)-55m 4pt brake holder installed
-
Avail Microcast SXHS1618R spool for ABU Morrum SX1600C Hi speed
ABU Morrum SX1600C Hi speed Super light weight 6.8g (12.6g genuine spool), extra strong duralumin spool PE#0.6(0.15mm)-80m. Casts great for heavier than 3.5gram, 1/8oz
$80.00 -
Avail EVA R-type knob
Relatively large, round shaped EVA knob. 27mm dia, 41mm length. 8g. Replaceable with Daiwa S, Shimano A knobs. Please purchase Avail GM knob caps sold separately.
$15.00 -
Avail EVA Slim knob
Slim EVA knob. 21mm dia, 41mm length. 7g. Replaceable with Daiwa S, Shimano A knobs. Please purchase Avail GM knob caps sold separately.
$15.00 -
DRT Varial Custom handle 140-150 single power handle (without center nut) Holiday Special sale! was sold for $188
DRT Varial single power handle for giant swim baits of over 12". Knob is single flat DRT knob. You may change the radius of the handle by changing the direction of the center components from 70mm to75mm (diameters from 140mm to 150mm) to suite the best for loads. Counter balancer is adjustable for distance to balance. DRT Handle center nut 140-150 is not included, and please purchase at least one or you may not fit the handle to reels. Comes with washers and the wrench for the center nut. The wrench cover with DRT logo on the photo is not included to this kit, or it is not sold separately.
-
Shimano 110mm Power Handle kit, EVA knobs (20BCT150D)
Power gripping 110mm swept, aluminum frame, EVA knob handle. Shimano bait casters 50-250 with swept start darg. Comes with retainer and screw. No handle nut is included.
$91.00 -
Shimano 105mm Power Handle kit, Gold, EVA knobs (16GRAB200H)
Power gripping 105mm swept, aluminum frame, EVA knob handle. Firts to Shimano bait casters 50-250 with swept star drag. Comes with a retainer and a screw. No handle nut is included.
$81.00 -
Avail Extra Magnet phi 4mm x thicness 1mm x 8pcs
Extra magnet for 16ALD15R, 17CNQ15R, 17SCP15R, 22ALD22R spools. Please mount them on stock magnets.
$8.00 -
Avail Macro Cast spool 16ALD15R spool for 16AldebaranBFS
Ultra light weight spool for Shimano16Aldebaran BFS XG (magnet brake model) for the ultimate finesse performance.
16ALD15R spool, 1.5mm deep, 4.9g, (genuine spool 7.7g) Line capacitiy 0.205mm-35m, 0.165mm-45m (Genuine spool 0.235mm-45m)
8pcs of additional neodium magnets, sold separately, are required to use this spool. The shallow spool is far from brake system, and you need to add these 1mm thick magnets to compensate the decreased brake force. -
Livre Crank Feather 100
100mm swept handle with machined aluminum frame and titanium knobs. Matches with sway back star drag reels, and straight star of up to 27mm radius.
Daiwa B1 SCR fits to Daiwa with hex head screw center nuts, like Steez, Zillion TW, and Tatula HD.It would take about a week to be shipped -
Livre Crank 120 Best handle for Tai-rubber and super light jigging, SLJ, with Shimano Conquest 200, 300.
120mm swept handle with machined aluminum frame and titanium knobs. Matches with sway back star drag reels, and straight star of up to 27mm radius.
Daiwa B1 SCR fits to Daiwa with hex head screw center nuts, like Steez, Zillion TW, and Tatula HD. It would take about a week to be shipped
