Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
-
- Spools, casting reels (64)
- Handles, casting reels (66)
- Handle knobs (60)
- Gears, brakes, level winders (78)
- Ball bearings, Pin remover (7)
- Spools, spinning reels (26)
- Handles, spinning reels (12)
- Frames, plates, star drag, colored parts (33)
- Drag washers (30)
Tuning Parts
-
Shimano Yumeya 18 Handle Paddle knob S, Shimano A
Flat, soft paddle knob in the same size of Shimano 2500 reels. Chrome cap. 5g Fitting: Shimano A
$17.00 -
Daiwa SLPW RCS High-grip I shaped finesse knob
Soft rubber high gripping knob. Lightest among Daiwa knobs. Doesn't have a cap for the hole. Fitting: Daiwa S 3g.
$16.00 -
Daiwa SLPW RCSB CT SV 700S G1 Black spool
Super shallow, light weight spool to improve casting performance for light rigs. Fits to Daiwa Steez CT, Alphas CT, Millionaire CT. LIne capacity 0.265mm(US8lb, JP10LB)-40m(45yds), 9g
$83.00 -
Avail Mag Brake AMB1518
Magnet brake system for Avail 1518TR tuning spools. Fits surely to Avail brake plates. Fits also to some stock brake plate of ABU 1500C 1600C, but some is a little larger in diameter and will not fit. 4 Super strong neodymium magnets. Attach the brake to the side plate
$23.00 -
Avail ESD Main Gear Bushing 1500C, 2500C, mechanical ratchet, non-IAR, 25C-MGB
Ultra light main gear shaft of ABU 1500C, 2500C made of extra strong duralumin (ESD), to remove 7g weight from the part. Fits to old ABU 1500C, 2500C, 3500C reels, with mechanical ratchet. Not fit to 1600C or 2600C thumb bar clutch models, or newer IAR instant-anti-reverse models. 3.5g. Genuine brass shaft 10.3g. Clutch return posts are increased from 2 to 4, and you may return clutch faster.
$24.00 -
Avail ESD Click Wheel 1500C, 2500C, mechanical ratchet, non-IAR
Ultra light drag pressure plate with clicker of ABU 1500C, 2500C made of extra strong duralumin (ESD), to remove 3g weight from the part. Fits to all ABU 1500C, 2500C, 3500C reels with mechanical ratchet. Not fit to IAR instant anti-reverse models. 2.1g. Genuine plate 5.1g. 12 click grooves are on the back to make finer clicking, instead of 8 holes of genuine plate.
$11.00 -
Avail ESD Click Wheel 1500C, 2500C, IAR
Ultra light drag pressure plate with clicker of ABU 1500C, 2500C made of extra strong duralumin (ESD), to remove 2g weight from the part. Fits to ABU 1500C, 2500C, 1600C, 2600C, 3500C reels with IAR instant anti-reverse. 1.9g. Genuine plate 3.3g. 12 click grooves are on the back to make finer clicking, instead of 8 of genuine plate. This IAR model click plate has lower thickness at post than that of non-IAR, mechanical ratchet models, and you need some washers to build up 1.5mm to use this clicker on older ratchet models.
$11.00 -
Avail Titanium64 Clutch return plate 2600C
Ultra light clutch return plate of ABU 2600C made of Titanium64, to remove 1.5g weight from the part. Fits to ABU 1600C, 2600C, Morrum 3600C, 5600C, 6600C, SX Hi Speed 1600C, 3600C, SX MAG 1600/3600, SX SW1600/3600. 1.9g. Genuine plate 3.4g. Replaces ABU #23188.
$18.00 -
Avail Titanium64 Drive gear plate Morrum ZX
Reinforced clutch return plate of ABU Morrum ZX made of Titanium64 for longer life. Genuine plate is made of aluminum, which is too weak to cause gearing noise soon. Fits to ABU Morrum SX Ultra MAG 1600/3600, ZX 1600/3600, SX IVCB 1600/3600, SX Ultra Mag S2. 1.8g. Genuine plate 1.1g. Replaces ABU #25802.
$18.00 -
Avail ABU Mechanical Brake Knob 55ST
ABU Ambassadeur 1000C-7500C, later than 1980 year models, except 1500C, 2500C, 3500C. Light weight 1.1g, machined ESD(extra strong duralumin, air craft grade duralumin) mechanical brake knobs. Doesn't come with copper washers inside.
-
Avail ABU Mechanical Brake Knob 2500C
ABU Ambassadeur 1500C, 1600C, 2500C, 2600C, 3500C. Light weight 1.1g, machined ESD(extra strong duralumin, air craft grade duralumin) mechanical brake knobs. Doesn't come with copper washers inside. Not fitting to 1500CA limited, 3500CA limited.
-
Avail ESD Main Gear Bushing 1500C, 2500C, IAR, 25CI-MGB
Ultra light main gear shaft of ABU 1500C, 2500C made of extra strong duralumin (ESD), to remove 8g weight from the part. Fits to all ABU 1500C, 2500C, 3500C reels with IAR, instant-anti-reverse. Not fit to 1600C or 2600C thumb bar clutch models. 3.2g. Genuine brass shaft 10.2g. Clutch return posts are increased from 2 to 4, and you may return clutch faster.
$24.00 -
DRT Varial custom handle 110mm flat knob (without center nut) Big handle for big swim baits
DRT Varial handle is full machined heavy duty handles for big baits. This 110mm version has large DRT flat knobs. Handle plate is quite thick 6mm at center to offer SOLID cranking. Stiff rubber knobs are large enough to grip firmly. Accept straight star up to 27mm radius, and sway back star drags. DRT Handle center nut is not included, and please purchase at least one or you may not fit the handle to reels. You may fit DRT flat knobs to this handle. Comes with fitting plates in 7mm and 8mm, wrench for center nut. Made in Japan
-
Avail POM shallow spool for ABU Cardinal 3, CD320R
Ultra light POM engineering plastic super shallow spool for old ABU Cardinal 3 and 33 spinning reels. Barrel shaped spool releases lines stress free. 2.0mm deep, 4lb(0.165mm)-40m, #0.6PE-75m
$48.00 -
Avail POM shallow spool for ABU Cardinal 3, CD340R
Ultra light POM engineering plastic shallow spool for old ABU Cardinal 3 and 33 spinning reels. Barrel shaped spool releases lines stress free. 4.0mm deep, 5lb(0.185mm)-85m, #0.6PE-150m
$48.00 -
Shimano 13/16Metanium micro-module brass gear kit
This is the brass gear kit for 13Metanium, 15Metanium DC and 16Metanium MGL reels. Gears are micro-module brass gears from Shimano. Stock main gears of these models are made of duralumin, which is not as durable as brass. You may change gear ratio to any of 6.2, 7.4 and 8.5. Comes with drive gear, pinion gear and a carbon drag washer. Drive gears and washers are from Shimano 19 Scorpion MGL. Pinion is that of Shimano 16 Metanium.
-
Avail aluminum worm shaft 2500C
This is the compatible level winder worm shaft of ABU Ambassadeur 2500C, made of aluminum alloy to remove weight. Fits to 2500C, 2501C, 2600C, 2601C, 3500C. 2.3g (genuine worm shaft 6.1g) Plastic part is made of Duracon POM to offer friction-less operation.
$24.00 -
Avail Microcast Spool ALD0928R II for Shimano 09 Aldebaran MG, Core 50MG
09Aldebaran Mg/Mg7, 10Scorpion XT1000/1001, 09Core 50MG, 10Chronarch 50E, 10Curado 50E. 4pt brake holder installed. Casts great for heavier than 3.0g 1/8oz. 0.26mm-50m/55yds 7.2g
-
Avail Microcast spools CNQ5020TR 00Conquest 50/51
Shimano Calcutta 00Conquest 50/51(year 2000-2013 model) 4 pt brake holder installed. Work with Magnet brake Avail SHSC-50A as well. Casts great for heavier than 2g. 0.205mm-45m/50yds 7.0g
-
Shimano 20 Metanium Japan spool
Genuine spool of Japan version 20 Metanium, 20% shallower spool than export version 20 Metanium, to improve casting performance for light rigs. It holds 0.285mm(US10lb)-100m(110yds), instead of export spool of US12lb(0.30mm)-110yds(100m). Spool depth 7mm at 2mm from side edge, instead of 9mm of export. Comes with brake holder and 4 brake blocks installed. Ready to use. Fits only to 20 Metanium reels. 14.1g
$74.00 -
Mike's Reel Repair Ball bearing Speed bushing 20639
Ball bearing supported spool bushing, compatible to 20639, to remove friction from spool spin. Ball bearing inner race supports spool cog side, while it is floating from spool shaft. With this bearing bushing, you may not much tighten the spool tension by cap, as bearing works against. Therefore, this is only recommended when you want to reduce minimal amount of friction from spool spin, and it is recommended to cast heavy rigs the longest. ABU4500CS, 5500CS, 6500C, 6500CS and etc, with 20639 brass bushing.
$13.00 -
Shimano Yumeya 20 Metanium Shallow spool 20 Metanium
Shimano 20/22/23 Metanium reels
-->
Light weight 14.3g, 35% shallower spool than Japan version 20 Metanium stock spool, 50% shallower than export Metanium (24 Metanium 100), to improve casting performance for light rigs around 3/16-1/2oz. 0.285mm(US10lb)-65m(70yds). SVS Infinity brake installed. You may cast from 5.0g with this spool without effort.$84.00 -
Itocraft Mountain Custom CX kit for Cardinal 3 Limited offered!
This is the tuning kit for Cardinal 3 and 33 to remove weight by 20g. It includes following. #1 machined side plate #2 side plate screw #3 spacer #4 bail mount screw #5 bail arm screw #6, 7 drive gear shaft sleeve #8 nut #9 protecting ring
-->$139.00 -
Avail aluminum alloy 2BB worm shaft 2500C, WS-25C-2BB-S 2025 New version!
This is the 2 ball bearing installed compatible level winder worm shaft of ABU 2500C, made by aluminum alloy to remove weight. This new version has a screw fastening the gear to the shaft, and you may change the ball bearing on the shaft. Fits to 2500C, 2501C, 2600C, 2601C, 3500C with a metal cup washer at level winder. Doesn't fit to the oldest model without it. 4.4g (genuine worm shaft 6.1g) Ball bearings removes friction in roration drastically. Plastic part is made of Duracon POM to offer friction-less operation.
$43.00
