Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
Tuning Parts
-
Daiwa SLP Works RCSB 1012 SV spools
Daiwa T3(all models), Zillion1016TW, Steez1016TW, Ryoga1025, Pluton1025. Flat bottom, super light-weight spool to improve casting performance for wide range or weight. Extra strong duralumin spool. MAGFORCE-AIR brake. Casts great for heavier than 3g 1/8oz. 0.310mm(US10lb)-70m(80yds)
-
Avail straight star drag SD-AB-KST for ABU
Fits to ABU 1500-6600C, Morrun SX-High speed, SX MAG. Star arms are straight. Longer than original star of 1500-6500 regular models. 50mm dia.
-
Avail SVS 4 Puller white 2014-2015
You may easily remove SVS infiniti 4 brake holder from Shimano spools with this tool. Brake blocks are red for this model. Shimano 14Scorpion 200, 14Chromarch Ci4+, 14Calcutta Conquest, 15Aldebaran, 15Curado 200, 15Curado 200i and etc, SVS 4pt Infinite model.
$10.00 -
ABU 2 point brake 22567
ABU 4000-6000 reels with Ultracast design. 6500CS, older 4600C3, 4600C4, 5600C3, 5600C4 and etc before around 2000. Has smaller shafts to accept 22565 bakelite brake blocks.
$6.00 -
ABU Garcia snap on cog 23404
Regular cog wheel, ultra cast design ABU 4500-6600. How to change cogs.
$6.00 -
Avail Off-set handle ESD STi2, STi2.5 for Shimano 7mm
Sway back, Extra Super Duralumin(ESD) handle frame fitting to Shimano bait casters with swept star drags. It is very strong and super light weight. 85, 90, 95, 100, 105mm, weight 13.2g 100mm. Color: Champaign gold, gunmetal, black. Fits to: Shimano 50-250 reels. For some straight star drag reels, please purchase additional 0.5mm washers to prevent star contacting with the handle frame. It is listed at the end of this handle listing. Accept both Daiwa S and Shimano A knobs. 85mm and 90mm are STi2.5 with light-weight ESD duralumin knob shafts. 95-105mm handles are Sti2 with sturdy titanium knob shafts. Retainer washer in the same color as handle frame and screws included.
-
Avail handle washer for ESD STi2 for Shimano
0.5mm handle washer to adjust gap between handle and star drag, for Shimano. To install Avail ESD STi2 handle.
$63.00 -
Livre Crank 100 Daiwa handle It would take about a week to be ready.
100mm long power handle with power knobs. Swept, machined aluminum frame, titanium knobs All Daiwa and ABU bait casters.*1 No sway back star drag needed. Please specify right, left or SCR. For Daiwa reels with handle locking screw, instead of nut, should choose SCR. For Ex., Ryoga, Z, Zillion special models, Steez, Zillion TW and etc. Suitable for Daiwa 300-ABU6500 sized reels.
-
Shimano Yumeya Aluminum Round Power Knob A (Shimano A fitting)
Light weight aluminum knob. S size 33.5mm dia 19g M size 39mm dia 25g Fitting: Shimano A Fits to Shimano spinning 1000-4000, All bait casters in 50-400 size.
-
Shimano Yumeya Aluminum Round Power Knob B (Shimano B fitting)
Light weight aluminum knob. M size 39mm dia 26g L size 45mm dia 32g Fitting: Shimano B Fits to Shimano SW spinning 4000-30000 and etc.
-
Shimano Yumeya Knob EVA Power Round M (02635)
Super light weight EVA knob 37mm dia, 11g. Fitting: Shimano A Fits to Shimano spinning 1000-4000, All bait casters in 50-400 size.
$31.00 -
Shimano Yumeya Knob EVA Power Round L (Shimano B fitting)
Light weight EVA knob 46mm dia, 18g. Fitting: Shimano B Fits to Shimano SW spinning 4000-30000 and etc.
$38.00 -
Shimano Yumeya Alumi Round Knob B, Black/Gold L (Shimano B fitting 26293)
Light weight machined aluminum knob 45mm dia, 32g. Fitting: Shimano B Fits to Shimano SW spinning 4000-30000 and etc.
$52.00 -
Shimano Yumeya Alumi Round Knob A, Black/Gold M (Shimano A fitting 26279)
Light weight machined aluminum knob 39mm dia, 25g. Fitting: Shimano A Fits to Shimano spinning 1000-4000 and etc.
$48.00 -
Daiwa Zillion PE special 7.9R Spool Red
Daiwa 08TD-Zillion, 09/12TD-Zillion PE Special, 04TD-Z100 US Trail, 05TD-Z BBS, 21 Steez A HLC
Flat bottom shallow spool to improve casting distance by about 20%. Super Light weight 13.8g. 0.310mm(US12lb)-100m(110yds). Magforce-Z brake. This is the spool to improve 09Zillion reels in casting light rigs of 1/4-3/8oz. Zillion stock spool weight 21g.$92.00 -
Owner S-75M Heavy wire single hooks for minnows
Heavy wire hooks, great for large trout, salmons, walleyes and other freshwater/saltwater games. Eyes are flat to hooks and it matches well to minnows. Ultra sharp hook points. Recommended for up to 5kg/10lb fish, with 20lb test mono lines. 7-10 hooks in package.
-
Daiwa SLPW long arm drag star, 60mm threaded
Fits to Daiwa with star drag clicking, thread inside. TD-Z, X, TD-ito, Zillion J D, 06Steez, Steez Ltd, T3, T3 MX, T3 Ballistic, SS, Zillion TW 1516, Morethan PE SV, Catalina Bay Jigging and etc. You may fit sway back handles with this star drag. Radius 30mm. Not fitting to: Ryoga, Pluton, Millionaire, Tatula, Steez SV, Steez A, Z 2020, T3 Air, Fuego CT, Shrapnel, Honga, Saltiga, Zillion TW HLC, Zillion SV.
-
Daiwa Zillion HLC spool spring
Fits to Daiwa 08Zillion, 09Zillion PE special and etc with Magforce Z brake system. This is the strong rotor spring employed to 09Zillion HLC hyper long cast reel spools. It is 4 times stronger than stock 08Zillion spools. With this HLC spring, spool will spin at twice the speed as stock spools at maximum, to cast 80-100yds with 1/2-1oz rigs.
$2.00 -
Mike's Ceramic Level wind Pawl 5176C for ABU Ambassadeur
Light weight ceramic pawl to cast longer. Its surface is quite smooth to remove friction. Fits to ABU Ambassadeur 4500-10000 reels. This line guide pawl fit all Ambassadeur casting reels which use part number 5176, 51765, 1116192. Warning! some 1500C, 2500C reels are reported not to work well with this pawl. If you notice a dragging with this pawl, please do not use it.
$7.00 -
Smoooooth Drag Carbontex Drag kit Daiwa bait casters #1
Ultra smooth carbontex drag washers. 3 drag washers. Set of 3 washers. Fits the following reels: TD150H, 150P, 150HL, 153HST, 153HSTL, Viento, Coastal, Alphas, Fuego, Sol, TDZ100/103/105, TDX103H/105H/103hi/105Hi, Tierra153H, Steez (100HA, 103HA, EX100HSL, EX100HL), Heartland XA 153HSTA, Saltist HFR, Coastal Barra153
$8.00 -
Shimano Yumeya Alumi Round Knob B, Black/Gold M (Shimano B fitting 26286)
Light weight machined aluminum knob 39mm dia, 25g. Fitting: Shimano B Fits to Shimano SW spinning 5000-4000 and etc.
$52.00 -
Avail handle washer for Off-set handle Daiwa 0.5mm
0.5mm handle washer to adjust handle thickness for Avail Off-set handle to be fitted on Daiwa reels with handle screw model, like Steez, Zillion J-Dream, Zillion TW and etc. One washer is enough to adjust for Avail Off-set handle.
$1.00 -
Mike's Ceramic ball hybrid bearing kit ABEC7, 3x10x4, 3x10x4
ABEC7 class precision bearings with ceramic balls to accelarate fast. Suitable for long distance casting, and casting for light rigs. 2pcs of 3x10x4mm bearings.
$20.00 -
Spool bearing installation service
This is the fee to install bearings onto spools. This service is only for customers who purchase bearing and spool together. Bearings on short shaft model, like Daiwa, Revo (except Gen 1 S and ST) requires to use pin remover, and this service is to do it for you. For long spool shaft reels like Shimanos, you don't have to replace the bearing on the shaft because it is not related to casting performances. It is to support shaft in case very large load is applied. For those reels please replace the two bearings at the both ends of spool shafts.
$5.00
