Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
Tuning Parts
-
Daiwa SLPW EX LT Quick Drag knob
You may change drag tension faster with this knob. This knob tightens drag by about 2 turn from zero to full. Regular drag knob tightens drag by about 8 turns. Fits with LT2500-3000 of 18Exist, 19Certate, and 21Luvias Airity.
$29.00 -
Avail ABU 1500-2500 brake blocks 4pcs 10267 ultra small 1853 (goku sho)
ABU brake blocks for 1500C, 2500C, 3500C. Smaller than stock ABU10267 blocks. Jun's tips. You may make similar brake blocks by cutting old fishing rod tips. Grass rod is better than carbon for more brake.
$3.00 -
Shimano Yumeya 21 Ultra Strong Handle 55 (110mm) BH-2 8mm fit
Custom sway back handle for Shimano 8mm shaft reels, like Conquest 300/400, Scorpion MD300, and etc. Large grips offer ultimate power in cranking. 110mm swept, aluminum frame. You may fit this power handle to Daiwa and ABU reels with 8mm main shaft. Comes with a retainer, screw, and two M8 center nuts for R and L. Center nuts are 11mm hex.
-->$83.00 -
Shimano Yumeya EVA Handle Knob I-Type Long 02616, Shimano A
Light weight EVA long knob good for 1000-C3000 reels 7g. Fitting: Shimano A
$21.00 -
Roro spool bearing pin remover TX8
This tool is to remove spool shaft pin to replace bearings on spools without damaging spool edges. Shaft size 3-5mm dia. Fits to Daiwa, Shimano, ABU, Quantum, Lew's, Phlueger and etc. How to change spool bearings
$21.00 -
Daiwa SLPW LT Type-a Quick Drag knob
You may change drag tension faster by 1/2-1/4 turn of regular knobs with this. Fits with LT2500-3000 of 18Caldia, 21Caldia, 20Luvias, 20Tatula LT, 20Ballistic and etc.
$21.00 -
ABU Works Line Carriage Chrome Limited offer! Selling out sale 50% OFF
Classic looking 9 line line carriage for ABU4000-6000. Body brass, stainless steel wire. Nut (under cap) is not included. 5g
Regular Price: $20.00
Special Price $10.00
-
ABU Works Line Carriage 18K Gold plated Limited offer! Selling out sale 50% OFF
Classic looking 9 line line carriage for ABU4000-6000. Body brass, stainless steel wire. Nut (under cap) is not included. 5g
Regular Price: $40.00
Special Price $20.00
-
Shimano 00Conquest 400 5.0 gear kit Right
5.0:1 regular gear kit, comes with drive gear and pinion gear. Shimano 00/01Calcutta Conquest 400, TE400.
$39.00 -
Daiwa SLPW, RCSB HD 1520 G1 spool
G1 (air craft grade) duralumin heavy duty spool for Daiwa 1500 sized reels. This HD spool has fixed brake rotor to emit stable brake force in casting. The brake is great for bulky rigs like swim baits, large deep divers and spinner baits. LIne capacity JP20lb(0.370mm, US14lb)-100m(110yds), 15g, 36mm dia.
$110.00 -
Daiwa genuine, 1520 G1 Magforce-Z spool (Ryoga1520H #21)
G1 (air craft grade) duralumin spool for Daiwa 1500 sized reels. This genuine spool has moving brake rotor to automatically adjust brake force in casting. The brake system is great to prevent backlash for wide range of rigs. LIne capacity JP20lb(0.370mm, US14lb)-100m(110yds), g, 36mm dia.
$100.00 -
ValleyHill Mechanical Brake cap set
Mechanial brake cap set for old ABU Ambassadeur reels, 4000-6000. Flanged cap make your ABUs look better.
$18.00 -
Avail aluminum alloy level wind pipe 2500C Gold Plated
This is the compatible level winder pipe of ABU 2500C, made by aluminum alloy to remove weight. Fits to 2500C, 2501C, 2600C, 2601C. 1.1g (genuine pipe 3.2g)
$14.00 -
IOS Factory SD connect, left
This is the connector to be used with Daiwa handles to fit to Shimano reels. Daiwa RCS screw-in handle 35-60mm left handle, Shimano screw-in body reel 1000-3000. Left handle only. No right handle model is offered at this moment.
$15.00 -
DRT Varial Calform knob, Silver
Ultra light weight EVA knob. By installing this Calform knob for 2pcs, your Varial 100 handle will be removed weight by 20g. Rim design is from forged aluminum wheels from US. Design disc is in it, to be modified later. Fitting, Shimano A, Daiwa S. 1pc in a package.
$56.00 -
Daiwa SLPW RCSB SV Boost 1000 G1 spools 2022 Red and purple added
This spool extends casting distance by reducing brake force at the later half in casting. Fits to Daiwa 1000, 1012, 1025 and 1016 reels, T3(all models) and etc. Flat bottom, ultra light-weight 11g spool to improve casting performance especially for ultra light weight rigs 3g-7g 1/8-1/4oz. G1 grade duralumin. In SV Boost brake, rotor will pop out far only at the beginning of casting to prevent backlash, and then it retracts to the middle to reduce brake to add casting distance. The second half spring is 4 times stronger than first half to do the trick. Casts great for heavier than 3g 1/8oz. 0.330mm(US12lb)-80m(90yds)
-
Daiwa SLPW SCL MC54 machine-cut aluminum star drag, non-thread 54mm dia selling out sale 50% off, was sold for $32
Fits to Daiwa with clicking star drag, non-thread inside. Screw Less model. This 54mm dia star is with shorter arms than regular star arms of 60mm. You may fit sway back handles with this star drag. Aluminum. Daiwa Z2020, 18Ryoga, Steez SV, Steez CT, Steez Air, Steez A, Zillion SV, Zillion TW HD, Tatula SV, Tatula 100/103, Tatula TW HLC, Tatula CT Type-R, Alphas SV TW, Alphas Air TW, Fuego CT, HRF PE Special, Honga 4.9/7.3, Ryoga Bay Jigging C1012/C2025, Millionaire Basara. Gekka Bijin TW, Silver Creek Air TW, Saltia IC100 and etc
-
Avail 2500C high speed gear set HGST Type2, 6.1:1 gear for ABU 1500 2500 series Smoother, easier clutch off
6.1:1 Super high speed gear set forABU Classic 1500C and 2500C series reels. 2 sets are offered for 1500/2500C, brass gear set and duralumin drive gear set. Pinion is made of brass for both. 57cm/ handle turn. Please set drag at lower than 1kg force. Suitable for up to 8lb mono. Kit includes main gear, pinion gear and two "High Speed 6.1" stickers. NOT for Morrum, SM or BM series 1600C or 1601C. These gear sets are only for classic Ambassadeur with two cast control caps on both side cups. 75S, A7075 air craft grade duralumin drive gear removes weight by 8.6g.
-
Avail Magnet brake MB-20MT
This is the magnet brake system working with Avail 20MT24R and 20MT42R spools for Shimano 20 Metanium. You may adjust the brake strength by the dial of reel. To install the magnet brake, please check here How to install magnet brake. It will not work with genuine spool of the Metanium.
$21.00 -
Avail Microcast spool 20MT24R, 20MT42R for 20 Metanium, 22 Metanium Shallow
Ultra light weight shallow spool for Shimano 20 Metanium and 22 Metanium Shallow for the ultimate finesse performance. 20MT24R, 2.4mm deep, 7.5g, line capacitiy 0.205mm-70m 20MT42R 4.2mm deep, 7.8g, line capacitiy 0.235mm-90m (genuine spool 14.1g, 0.285mm-100m) SVS Infinity brake holder is not coming with this spool, and please swap it from stock spool. Avail SVS Infinity Puller is useful to do the job. You may also use this spool with MB-20MT magnet brake system. Both are listed on this page below.
-
Avail Microcast AMB5050R-C spool Silver, Old ABU 5000C 5001C
Avail shallow spool for old ABU 5000C 5001C reels in 60's and 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5000C with palming cup, 5000C with a little popping gear plate, 5000 with bronz bushing or 5500C high speed reels. 0.285mm-110m
$78.00 -
Avail Microcast AMB5030R-C spool Black, Old ABU 5000C 5001C
Avail super shallow spool for old ABU 5000C 5001C reels in 60's and 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5000C with palming cup, 5000C with a little popping gear plate, 5000 with bronz bushing or 5500C high speed reels. 0.285mm-75m
$78.00 -
Avail ESD Brake Plate 2500C IAR, Chrome
ABU 2500C AIR model compatible brake plate (gear side plate) to remove weight by about half. 16.4g (genuine 33g) Made by ESD, extra strong duralumin.
$93.00 -
Avail ESD Palming Plate 2500C, Chrome
ABU 2500C compatible palming plate (palming side plate) to remove weight by about 1g. 9.2g (genuine 10.2g) Made by ESD, extra strong duralumin.
$31.00
