Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
Tuning Parts
-
Shimano 20 Metanium Japan spool
Genuine spool of Japan version 20 Metanium, 20% shallower spool than export version 20 Metanium, to improve casting performance for light rigs. It holds 0.285mm(US10lb)-100m(110yds), instead of export spool of US12lb(0.30mm)-110yds(100m). Spool depth 7mm at 2mm from side edge, instead of 9mm of export. Comes with brake holder and 4 brake blocks installed. Ready to use. Fits only to 20 Metanium reels. 14.1g
$74.00 -
Mike's Reel Repair Ball bearing Speed bushing 20639
Ball bearing supported spool bushing, compatible to 20639, to remove friction from spool spin. Ball bearing inner race supports spool cog side, while it is floating from spool shaft. With this bearing bushing, you may not much tighten the spool tension by cap, as bearing works against. Therefore, this is only recommended when you want to reduce minimal amount of friction from spool spin, and it is recommended to cast heavy rigs the longest. ABU4500CS, 5500CS, 6500C, 6500CS and etc, with 20639 brass bushing.
$13.00 -
Mike's Reel Repair Dual ball bearing worm kit
2 Ball bearing installed level winder kit removes friction and add casting distance.Three models, 4000, 5000, 6000 available for ABU Ambassadeur 4000-4600, 5000-5600, 6000-6600 respectively.
-
Shimano Yumeya 20 Metanium Shallow spool 20 Metanium
Shimano 20/22/23 Metanium reels
-->
Light weight 14.3g, 35% shallower spool than Japan version 20 Metanium stock spool, 50% shallower than export Metanium (24 Metanium 100), to improve casting performance for light rigs around 3/16-1/2oz. 0.285mm(US10lb)-65m(70yds). SVS Infinity brake installed. You may cast from 5.0g with this spool without effort.$84.00 -
Daiwa SLPW EX LT 3000S Black spool
Machined aluminum spool, with CRBB ball bearing added inside for smooth drag. ATD drag system. Daiwa 18/22 Exist, 19 Certate, 21 Luvias Airity, 23Airity (LT3000, PCLT3000, 3000C) Line capacity 8lb(0.23mm)-100m(110yds), 6lb(0.20mm)-150m(165y), 30g, 10kg drag
Regular Price: $96.00
Special Price $67.00
-
Daiwa SLPW EX LT 3000 Black spool
Machined aluminum spool, with CRBB ball bearing added inside for smooth drag. ATD drag system. Daiwa 18/22 Exist, 19 Certate, 21 Luvias Airity, 23Airity (LT3000, 3000C) Line capacity 12lb(0.285mm)-100m(110yds), 8lb(0.235mm)-150m(165y), 30g, 10kg drag
Regular Price: $96.00
Special Price $67.00
-
Itocraft Mountain Custom CX kit for Cardinal 3 Limited offered!
This is the tuning kit for Cardinal 3 and 33 to remove weight by 20g. It includes following. #1 machined side plate #2 side plate screw #3 spacer #4 bail mount screw #5 bail arm screw #6, 7 drive gear shaft sleeve #8 nut #9 protecting ring
$139.00 -
Avail aluminum alloy 2BB worm shaft 2500C
This is the 2 ball bearing installed compatible level winder worm shaft of ABU 2500C, made by aluminum alloy to remove weight. Fits to 2500C, 2501C, 2600C, 2601C, 3500C. 3.0g (genuine worm shaft 6.1g) Ball bearings removes friction in roration drastically. Plastic part is made of Duracon POM to offer friction-less operation.
$37.00 -
Valleyhill Classic Power Handle ST 80mm S-shape plain (no hole) frame Selling out sale 50% off, was sold for $39
80mm chrome, plain frame handle without holes. Knobs are in transparent colors. Matches quite well with classic ABUs. Fits to ABU bait casters 1500-6600. Comes with retainer, nut (R) and screw. No ball bearing installed
-
ValleyHill Handle Parts set R
Set of retainer, retainer screw and nut, right R for ABU Ambassadeur 1500-6600 handles.
$6.00 -
ValleyHill Handle Parts set Left
Set of retainer, retainer screw and nut, left L for ABU Ambassadeur 1501-6601 handles.
$6.00 -
ValleyHill 2BB cross bar 2500
2 ball bearing level winder system for ABU 2500C, 2501C, 2600C, 2601C and 3500C. Another ball bearing is inside the black plastic part. You may access to the bearing by unscrewing a screw on the gear.
$29.00 -
ValleyHill 2BB cross bar 1500
2 ball bearing level winder system for ABU 1500C, 1600C. Another ball bearing is inside the black plastic part. You may access to the bearing by unscrewing a screw on the gear.
$29.00 -
Roro Ceramic ball bearings
Super performance bearings for bait casting reels. Bearing balls are made of ceramics to remove weight. Outer and inner laces are made of stainless steel. 3 models are listed, Red BFS 1-10g, Red BFS 1-15g and Silver Regular bearings. Red BFS bearings are assembled with small bearings with red aluminum collar to remove weight from inner spinning part. Due to the small bearing installed, suitable casting weights are limited to 10g for Red BFS. Silver Regular models are simple ceramic ball bearings without red housing.
-
Avail spool cog gear 10255 black
This is the replacement of ABU #10255 and 1152469 spool cog for 2500C.
$12.00 -
Shimano 90mm handle kit, straight frame, EVA knobs, 11SaltyOneHG
Shimano replacement bait casting reel handle. 90mm. Main shaft 7mm, fits to Shimano bait casting reels 50-250. Comes with R handle nut, retainer and screw.
$50.00 -
Livre t1.0x phi 17 round washer, Shimano
Livre and DRT handle washer for Shimano, to be placed under handle to adjust gap between handle and star drag. 4mmx7mm
$2.00 -
Livre t1.0x phi 17 round washer, Daiwa
Livre and DRT handle washer for Daiwa, to be placed under handle to adjust gap between handle and star drag. 5mmx8mm hole
$2.00 -
Avail aluminum alloy 2BB worm shaft 1500C
This is the 2 ball bearing installed compatible level winder worm shaft of ABU 1500C, made by aluminum alloy to remove weight. Fits to 1500C, 1600C, 1601C. 3.8g (genuine worm shaft 8.7g) Ball bearings removes friction in rotation drastically. Plastic part is made of Duracon POM to offer friction-less operation.
$37.00 -
Avail aluminum alloy level wind pipe 1500C
This is the compatible level winder pipe of ABU 1500C, made by aluminum alloy to remove weight. Fits to 1500C, 1600C, 1601C. 1.0g (genuine pipe 3.1g)
$11.00 -
Avail aluminum alloy level wind pipe 2500C
This is the compatible level winder pipe of ABU 2500C, made by aluminum alloy to remove weight. Fits to 2500C, 2501C, 2600C, 2601C. 1.1g (genuine pipe 3.2g)
$11.00 -
Avail Microcast AMB3520R finesse spool with 4pt brake
ABU Ambassadeur 3500C Super light weight 6.1g, extra strong duralumin spool 0.205mm(jp6lb)-55m 4pt brake holder installed
-
Avail Microcast SXHS1618R spool for ABU Morrum SX1600C Hi speed
ABU Morrum SX1600C Hi speed Super light weight 6.8g (12.6g genuine spool), extra strong duralumin spool PE#0.6(0.15mm)-80m. Casts great for heavier than 3.5gram, 1/8oz
$80.00 -
Avail EVA R-type knob
Relatively large, round shaped EVA knob. 27mm dia, 41mm length. 8g. Replaceable with Daiwa S, Shimano A knobs. Please purchase Avail GM knob caps sold separately.
$20.00
