Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
-
- Spools, casting reels (74)
- Handles, casting reels (61)
- Handle knobs (57)
- Gears, brakes, level winders (79)
- Ball bearings, Pin remover (7)
- Spools, spinning reels (30)
- Handles, spinning reels (11)
- Frames, plates, star drag, colored parts (41)
- Drag washers (30)
Tuning Parts
-
Avail handle washer for ESD STi2 for Shimano
0.5mm handle washer to adjust gap between handle and star drag, for Shimano. To install Avail ESD STi2 handle.
$1.00 -
Livre Crank 100 Daiwa handle It would take about a week to be ready.
100mm long power handle with power knobs. Swept, machined aluminum frame, titanium knobs All Daiwa and ABU bait casters.*1 No sway back star drag needed. Please specify right, left or SCR. For Daiwa reels with handle locking screw, instead of nut, should choose SCR. For Ex., Ryoga, Z, Zillion special models, Steez, Zillion TW and etc. Suitable for Daiwa 300-ABU6500 sized reels.
-
Shimano Yumeya Aluminum Round Power Knob A (Shimano A fitting)
Light weight aluminum knob. S size 33.5mm dia 19g M size 39mm dia 25g Fitting: Shimano A Fits to Shimano spinning 1000-4000, All bait casters in 50-400 size.
-
Shimano Yumeya Aluminum Round Power Knob B (Shimano B fitting)
Light weight aluminum knob. M size 39mm dia 26g L size 45mm dia 32g Fitting: Shimano B Fits to Shimano SW spinning 4000-30000 and etc.
-
Shimano Yumeya Knob EVA Power Round M (02635)
Super light weight EVA knob 37mm dia, 11g. Fitting: Shimano A Fits to Shimano spinning 1000-4000, All bait casters in 50-400 size.
-->$31.00 -
Shimano Yumeya Knob EVA Power Round L (Shimano B fitting)
Light weight EVA knob 46mm dia, 18g. Fitting: Shimano B Fits to Shimano SW spinning 4000-30000 and etc.
$38.00 -
Shimano Yumeya Alumi Round Knob B, Black/Gold L (Shimano B fitting 26293)
Light weight machined aluminum knob 45mm dia, 32g. Fitting: Shimano B Fits to Shimano SW spinning 4000-30000 and etc.
$52.00 -
Shimano Yumeya Alumi Round Knob A, Black/Gold M (Shimano A fitting 26279)
Light weight machined aluminum knob 39mm dia, 25g. Fitting: Shimano A Fits to Shimano spinning 1000-4000 and etc.
$48.00 -
Daiwa Zillion PE special 7.9R Spool Red
Daiwa 08TD-Zillion, 09/12TD-Zillion PE Special, 04TD-Z100 US Trail, 05TD-Z BBS, 21 Steez A HLC
Flat bottom shallow spool to improve casting distance by about 20%. Super Light weight 13.8g. 0.310mm(US12lb)-100m(110yds). Magforce-Z brake. This is the spool to improve 09Zillion reels in casting light rigs of 1/4-3/8oz. Zillion stock spool weight 21g.$92.00 -
Owner S-75M Heavy wire single hooks for minnows
Heavy wire hooks, great for large trout, salmons, walleyes and other freshwater/saltwater games. Eyes are flat to hooks and it matches well to minnows. Ultra sharp hook points. Recommended for up to 5kg/10lb fish, with 20lb test mono lines. 7-10 hooks in package.
-
Daiwa SLPW long arm drag star, 60mm threaded
Fits to Daiwa with star drag clicking, thread inside. TD-Z, X, TD-ito, Zillion J D, 06Steez, Steez Ltd, T3, T3 MX, T3 Ballistic, SS, Zillion TW 1516, Morethan PE SV, Catalina Bay Jigging and etc. You may fit sway back handles with this star drag. Radius 30mm. Not fitting to: Ryoga, Pluton, Millionaire, Tatula, Steez SV, Steez A, Z 2020, T3 Air, Fuego CT, Shrapnel, Honga, Saltiga, Zillion TW HLC, Zillion SV.
-
Daiwa Zillion HLC spool spring
Fits to Daiwa 08Zillion, 09Zillion PE special and etc with Magforce Z brake system. This is the strong rotor spring employed to 09Zillion HLC hyper long cast reel spools. It is 4 times stronger than stock 08Zillion spools. With this HLC spring, spool will spin at twice the speed as stock spools at maximum, to cast 80-100yds with 1/2-1oz rigs.
$2.00 -
Mike's Ceramic Level wind Pawl 5176C for ABU Ambassadeur
Light weight ceramic pawl to cast longer. Its surface is quite smooth to remove friction. Fits to ABU Ambassadeur 4500-10000 reels. This line guide pawl fit all Ambassadeur casting reels which use part number 5176, 51765, 1116192. Warning! some 1500C, 2500C reels are reported not to work well with this pawl. If you notice a dragging with this pawl, please do not use it.
$7.00 -
Smoooooth Drag Carbontex Drag kit Daiwa bait casters #1
Ultra smooth carbontex drag washers. 3 drag washers. Set of 3 washers. Fits the following reels: TD150H, 150P, 150HL, 153HST, 153HSTL, Viento, Coastal, Alphas, Fuego, Sol, TDZ100/103/105, TDX103H/105H/103hi/105Hi, Tierra153H, Steez (100HA, 103HA, EX100HSL, EX100HL), Heartland XA 153HSTA, Saltist HFR, Coastal Barra153
$8.00 -
Shimano Yumeya Alumi Round Knob B, Black/Gold M (Shimano B fitting 26286)
Light weight machined aluminum knob 39mm dia, 25g. Fitting: Shimano B Fits to Shimano SW spinning 5000-4000 and etc.
$52.00 -
Avail handle washer for Off-set handle Daiwa 0.5mm
0.5mm handle washer to adjust handle thickness for Avail Off-set handle to be fitted on Daiwa reels with handle screw model, like Steez, Zillion J-Dream, Zillion TW and etc. One washer is enough to adjust for Avail Off-set handle.
$1.00 -
Mike's Ceramic ball hybrid bearing kit ABEC7, 3x10x4, 3x10x4
ABEC7 class precision bearings with ceramic balls to accelarate fast. Suitable for long distance casting, and casting for light rigs. 2pcs of 3x10x4mm bearings.
$20.00 -
Spool bearing installation service
This is the fee to install bearings onto spools. This service is only for customers who purchase bearing and spool together. Bearings on short shaft model, like Daiwa, Revo (except Gen 1 S and ST) requires to use pin remover, and this service is to do it for you. For long spool shaft reels like Shimanos, you don't have to replace the bearing on the shaft because it is not related to casting performances. It is to support shaft in case very large load is applied. For those reels please replace the two bearings at the both ends of spool shafts.
$5.00 -
Avail EVA A-type knob Most recommended knob for 90-100mm handles
Relatively large, round shaped EVA knob. 27mm dia, 41mm length. 7g. Replaceable with Daiwa S, Shimano A knobs. Please purchase Avail GM knob caps sold separately.
$20.00 -
Avail Ultra Light Level Winder kit 2500C
Ultra light wight 1.9g level winder kit for ABU Ambassadeur 1500C, 2500C and 3500C. Stock level winder is 6.0g. Replaces level winder (line guide) 10212 and 21896. Body is made of duralumin, and wire is made of titanium. Please use stock pawl. 3 models for front surface, plain, 11-Line, and 17-Line.
-
Shimano Yumeya CI4+ Round handle knob L 35868, Shimano B
Ultra light weight 45mm dia large knob, 26g. Made of CI4+ engineering plastic to remove weight. Shimano B fitting. This knob is maily for multiply reels. Not for heavy use in jigging or offshore casting.
$43.00 -
Daiwa SLPW RCSB HLC1514 G1 Hyper Long Cast spool
Fits to Daiwa 15XX bait casters, including Daiwa 15Zillion TW1516. It also fits to Daiwa Zillion TWS100 export reels. This spool is to cast the longest for heavier than 1/2oz rigs. The brake rotor spring is 4 times stronger than regular spools, making it emitting far less brake force than regular spools. G1 duralumin material is employed. Spool dia 36mm, weight 14g, 0.310mm(US12lb)-100m(110yds).
-->$86.00 -
Shimano Yumeya Handle Knob Rubber T M Type B 03375
Flat knob for fast retrieve. Stock knob of 08-13Stella SW4000XG. 12g. Shimano B fitting. Stella SW4000-30000 and etc.
$28.00
