Menu 

Daiwa SLP Works, RCSB CT SV 700 G1 spools

Daiwa CT70/700 reels, like Steez CT TW700, Alphas CT70, and Millionaire CT70. Flat bottom, ultra light-weight 8g, 30mm dia spool, same as stock spool of reel above. G1 drage Extra strong duralumin spool. Casts great for heavier than 3g 1/8oz. 0.310mm(US12lb)-60m(70yds)

Shimano 84mm handle kit, sway back,black, 17BassoneXT

Shimano replacement bait casting reel handle. 84mm. Main shaft 7mm, fits to Shimano bait casting reels 50-250, with sway back star drags. Comes with R handle nut, retainer and screw.

Avail Ultra Light Level Winder kit 55C

Ultra light wight 1.9g level winder kit for ABU Ambassadeur 4500C, 4600C, 5000, 5000C, 5500C, 5600C, 6000, 6000C, 6500C, 6600C Stock level winder is 6.0g. Replaces level winder of 4000-6000. Body is made of duralumin, and wire is made of titanium. Please use stock pawl.

Daiwa Seaborg 70mm single power handle kit 300MJ  selling out sale 66% Off!

70mm long single power handle with 44mm dia large knob for Daiwa/ABU bait casters, and Shimano Conquest 300/400. 2 ball bearing installed. Comes with R nut and nut cover. Best for Millionaire 300, ABU 6500/6600 and Conquest 400/401. For left hand reels, Daiwa Hooded Nut M8 Left is required. Accepts sway back star drag and straight shaped star drags of up to 60mm diameter, fine for most ABU 1500-6600 and Daiwa.

Smoooooth Drag Carbontex Drag kit for 2015/2018 Conquest 300 400

Ultra smooth carbontex drag washers. Set of 4 washers. Fits :Shimano 2015/2018 Conquest 300 400 Gear-inner washer dia 27.0mm x 3pcs.

DRT Varial MK-1 Wheel cap

Knob cap for DRT handles. 16mm dia. This knob cap fits to the original knobs of Varial 87/110/117mm handles, which has 16mm knob caps. You may fit DRT J-Flat, J-FAT, J-Slim knobs to Varial 95/100 handles by installing this knob caps. 1pc in package.

DRT Slim-J, Fat-J replacement knob rubber 2pcs

Replacement knob rubber for DRT 87/117 handles. Slim black rubber is on 87, Fat black is on 117. You may install this J-Slim and J-Fat rubbers to DRT 95/100 handles by installing MK-1 Wheel caps.

Avail Off-set frame 2501-AOF75 ABU2501C left 7.5mm chrome

7.5mm low sitting frame of ABU 2501C left hand. Machined extra strong duralumin, ESD (air craft grade A7075 duralumin), side plates, reel foots and thumb bars, with titanium64 alloy screw posts and stainless steel screws. 29.3g (stock frame is 51g) Made in Japan With this frame, reel body will be set on rods by 7.5mm lower than regular frame, and you may manipulate tackle with more accuracy.

Avail Neodim extra magnet, 4mm dia, 3.5mm thick Avail brake 1540

Livre quick change system, washer 7mm Shimano  

Bottom washer for Livre and DRT handles to fit to Shimano 7mm main shaft. Shimano 50-250 bait casters, CT300, CT400. 4x7mm hole

Livre quick change system, washer 8mm Daiwa/ABU  

Bottom washer for Livre and DRT handles to fit to Daiwa/ABU 8mm main shaft. Shimano Conquest 300, 400, Daiwa, and ABU bait casters. 8x5mm hole

Shimano Yumeya 18 Handle Paddle knob S, Shimano A  

Flat, soft paddle knob in the same size of Shimano 2500 reels. Chrome cap. 5g Fitting: Shimano A

Daiwa SLPW RCS High-grip I shaped finesse knob

Soft rubber high gripping knob. Lightest among Daiwa knobs. Doesn't have a cap for the hole. Fitting: Daiwa S 3g.

Daiwa SLPW RCSB CT SV 700S G1 Black spool

Super shallow, light weight spool to improve casting performance for light rigs. Fits to Daiwa Steez CT, Alphas CT, Millionaire CT. LIne capacity 0.265mm(US8lb, JP10LB)-40m(45yds), 9g

Avail Microcast Spool AMB1518TR   no brake holder attached

Super shallow 1.8mm spool without brake holder. Please swap or purchase brake holder separately. ABU 1500C, 150Plus, 1600C, 1601C. Doesn't fit to 1500CA Limited. Extreme light weight 5.3g, machined ESD(extra strong duralumin, air craft grade duralumin) spool Casts great for heavier than 2.0g, example: 20m for 2.0g 0.205mm-35m You may use AMB1518 mag brake to these spool

Avail Mag Brake AMB1518

Magnet brake system for Avail 1518TR tuning spools. Fits surely to Avail brake plates. Fits also to some stock brake plate of ABU 1500C 1600C, but some is a little larger in diameter and will not fit. 4 Super strong neodymium magnets. Attach the brake to the side plate

Avail Mag Brake AMB2518

Magnet brake system for Avail 2518TR tuning spools. Fits surely to Avail brake plates. Fits also to some stock brake plate of ABU 2500C 2600C, but some is a little larger in diameter and will not fit. 4 Super strong neodymium magnets. Attach the brake to the side plate

Avail ESD Click Wheel 1500C, 2500C, mechanical ratchet, non-IAR

Ultra light drag pressure plate with clicker of ABU 1500C, 2500C made of extra strong duralumin (ESD), to remove 3g weight from the part. Fits to all ABU 1500C, 2500C, 3500C reels with mechanical ratchet. Not fit to IAR instant anti-reverse models. 2.1g. Genuine plate 5.1g. 12 click grooves are on the back to make finer clicking, instead of 8 holes of genuine plate.

Avail ESD Click Wheel 1500C, 2500C, IAR

Ultra light drag pressure plate with clicker of ABU 1500C, 2500C made of extra strong duralumin (ESD), to remove 2g weight from the part. Fits to ABU 1500C, 2500C, 1600C, 2600C, 3500C reels with IAR instant anti-reverse. 1.9g. Genuine plate 3.3g. 12 click grooves are on the back to make finer clicking, instead of 8 of genuine plate. This IAR model click plate has lower thickness at post than that of non-IAR, mechanical ratchet models, and you need some washers to build up 1.5mm to use this clicker on older ratchet models.