Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
-
- Spools, casting reels (64)
- Handles, casting reels (66)
- Handle knobs (60)
- Gears, brakes, level winders (78)
- Ball bearings, Pin remover (7)
- Spools, spinning reels (26)
- Handles, spinning reels (12)
- Frames, plates, star drag, colored parts (33)
- Drag washers (30)
Tuning Parts
-
Avail, ABU C clip 1 pcs 4490-A
Avail made, ABU C clip to fasten super cog to cog post. It is also used to fasten main shaft to handle post.
$1.00 -
Avail Mag Brake CR2 right hand
Magnet brake system for ABU 4000, 4500, 4600, 5000, 5500, 5600, 6000, 6500, and 6600 reels without clicker. Reels with clicker switch, the brake system contacts to the clicker and you may not install the brake. Right hand retrieve only. 4 Super strong neodymium magnet independently adjustable How to install
$23.00 -
Avail Mag Brake CL2 Left hand
Magnet brake system for ABU 4001, 4501, 4601, 5001, 5501, 5601, 6001, 6501 and 6601 reels, without clicker. Reels with clicker switch, the brake system contact to the clicker and you may not install the brake. Left hand retrieve only. 4 Super strong neodymium magnets independently adjustable. How to install
$23.00 -
Avail Microcast AMB4550R-EF spool, for Old ABU 4500C 4600C, Gunmetal
Avail shallow spool for old ABU 4500C, 4600C reels sold in 70's. 1976-78 4500C, and 1978 4600C with red thumb bars. Does not fit to other 4500 with bronze bushing reels, 4600CB or replica 4500C models sold later. 0.285mm-70m
$78.00 -
Avail Microcast AMB1050R spool Red + 4pt brake
Avail shallow spool for ABU 1000 1000C reels. 0.285mm(US10lb, JP12lb)-70m. Installed with the 4pt brake holder on the photo.
$80.00 -
Avail Microcast OLD5550C70'S spool Black, Old ABU 5500C 70's
Avail shallow spool for old ABU 5500C reels in 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5500C sold in 80's or later. Difference is at the genuine spool, and 70's spool has silver plates on both sides, but 80's doesn't have them and it is black spool wall. 0.285mm-110m
$70.00 -
Avail ABU 2BB Super 5152 Cog Wheel
2 ball bearing installed POM engineering plastic cog wheel for ABU. Fits to ABU reels with 5152 gear, 21800 gear. ABU 1500C, 2500C, Older 4500-6500 with fixed spool shafts. How to change cogs.
$31.00 -
Avail Microcast spools 14CNQ1068R 14Conquest 100
Shimano Calcutta 14Conquest 100 (year 2014-,2015- model) No brake holder included. Please use SVS from original spool, and Avail SVS puller is helpful to remove SVS. Casts great for heavier than 4g. 0.33mm-90m/100yds 9.8g
-
Avail Microcast spools 14CNQ2060R for Shimano 14Conquest 200 Selling out sale 30% off, was sold for $68
Shimano Calcutta 14Conquest 200 (year 2014-,2015- model) No brake included. Please use SVS from original spool, Avail SVS puller is helpful to remove SVS Casts great for heavier than 5g. 0.33mm-100m/110yds 10.9g
-
Avail BB pinion bushing 13462 Re-stocked!
Ball bearing pinion bushing remove friction from pinion. ABU1500C, 2500C, 1600C, 2600C, 2601C
$14.00 -
Avail straight star drag SD-AB-KST for ABU
Fits to ABU 1500-6600C, Morrun SX-High speed, SX MAG. Star arms are straight. Longer than original star of 1500-6500 regular models. 50mm dia.
-
ABU 2 point brake 22567
ABU 4000-6000 reels with Ultracast design. 6500CS, older 4600C3, 4600C4, 5600C3, 5600C4 and etc before around 2000. Has smaller shafts to accept 22565 bakelite brake blocks.
$6.00 -
ABU Garcia snap on cog 23404
Regular cog wheel, ultra cast design ABU 4500-6600. How to change cogs.
$6.00 -
Avail Off-set handle ESD STi2, STi2.5 for Shimano 7mm
Sway back, Extra Super Duralumin(ESD) handle frame fitting to Shimano bait casters with swept star drags. It is very strong and super light weight. 85, 90, 95, 100, 105mm, weight 13.2g 100mm. Color: Champaign gold, gunmetal, black. Fits to: Shimano 50-250 reels. For some straight star drag reels, please purchase additional 0.5mm washers to prevent star contacting with the handle frame. It is listed at the end of this handle listing. Accept both Daiwa S and Shimano A knobs. 85mm and 90mm are STi2.5 with light-weight ESD duralumin knob shafts. 95-105mm handles are Sti2 with sturdy titanium knob shafts. Retainer washer in the same color as handle frame and screws included.
-
Avail handle washer for ESD STi2 for Shimano
0.5mm handle washer to adjust gap between handle and star drag, for Shimano. To install Avail ESD STi2 handle.
$1.00 -
Livre Crank 100 Daiwa handle It would take about a week to be ready.
100mm long power handle with power knobs. Swept, machined aluminum frame, titanium knobs All Daiwa and ABU bait casters.*1 No sway back star drag needed. Please specify right, left or SCR. For Daiwa reels with handle locking screw, instead of nut, should choose SCR. For Ex., Ryoga, Z, Zillion special models, Steez, Zillion TW and etc. Suitable for Daiwa 300-ABU6500 sized reels.
-
Shimano Yumeya Aluminum Round Power Knob A (Shimano A fitting)
Light weight aluminum knob. S size 33.5mm dia 19g M size 39mm dia 25g Fitting: Shimano A Fits to Shimano spinning 1000-4000, All bait casters in 50-400 size.
-
Shimano Yumeya Aluminum Round Power Knob B (Shimano B fitting)
Light weight aluminum knob. M size 39mm dia 26g L size 45mm dia 32g Fitting: Shimano B Fits to Shimano SW spinning 4000-30000 and etc.
-
Shimano Yumeya Knob EVA Power Round M (02635)
Super light weight EVA knob 37mm dia, 11g. Fitting: Shimano A Fits to Shimano spinning 1000-4000, All bait casters in 50-400 size.
-->$31.00 -
Shimano Yumeya Knob EVA Power Round L (Shimano B fitting)
Light weight EVA knob 46mm dia, 18g. Fitting: Shimano B Fits to Shimano SW spinning 4000-30000 and etc.
$38.00 -
Shimano Yumeya Alumi Round Knob B, Black/Gold L (Shimano B fitting 26293)
Light weight machined aluminum knob 45mm dia, 32g. Fitting: Shimano B Fits to Shimano SW spinning 4000-30000 and etc.
$52.00 -
Shimano Yumeya Alumi Round Knob A, Black/Gold M (Shimano A fitting 26279)
Light weight machined aluminum knob 39mm dia, 25g. Fitting: Shimano A Fits to Shimano spinning 1000-4000 and etc.
$48.00
