Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
Tuning Parts
-
Daiwa SLPW RCSB CT SV 700S G1 Black spool
Super shallow, light weight spool to improve casting performance for light rigs. Fits to Daiwa Steez CT, Alphas CT, Millionaire CT. LIne capacity 0.265mm(US8lb, JP10LB)-40m(45yds), 9g
$83.00 -
Avail Microcast Spool AMB1518TR no brake holder attached
Super shallow 1.8mm spool without brake holder. Please swap or purchase brake holder separately. ABU 1500C, 150Plus, 1600C, 1601C. Doesn't fit to 1500CA Limited. Extreme light weight 5.3g, machined ESD(extra strong duralumin, air craft grade duralumin) spool Casts great for heavier than 2.0g, example: 20m for 2.0g 0.205mm-35m You may use AMB1518 mag brake to these spool
-
Avail Mag Brake AMB1518
Magnet brake system for Avail 1518TR tuning spools. Fits surely to Avail brake plates. Fits also to some stock brake plate of ABU 1500C 1600C, but some is a little larger in diameter and will not fit. 4 Super strong neodymium magnets. Attach the brake to the side plate
$23.00 -
Avail Mag Brake AMB2518
Magnet brake system for Avail 2518TR tuning spools. Fits surely to Avail brake plates. Fits also to some stock brake plate of ABU 2500C 2600C, but some is a little larger in diameter and will not fit. 4 Super strong neodymium magnets. Attach the brake to the side plate
$23.00 -
Avail ESD Click Wheel 1500C, 2500C, mechanical ratchet, non-IAR
Ultra light drag pressure plate with clicker of ABU 1500C, 2500C made of extra strong duralumin (ESD), to remove 3g weight from the part. Fits to all ABU 1500C, 2500C, 3500C reels with mechanical ratchet. Not fit to IAR instant anti-reverse models. 2.1g. Genuine plate 5.1g. 12 click grooves are on the back to make finer clicking, instead of 8 holes of genuine plate.
$11.00 -
Avail ESD Click Wheel 1500C, 2500C, IAR
Ultra light drag pressure plate with clicker of ABU 1500C, 2500C made of extra strong duralumin (ESD), to remove 2g weight from the part. Fits to ABU 1500C, 2500C, 1600C, 2600C, 3500C reels with IAR instant anti-reverse. 1.9g. Genuine plate 3.3g. 12 click grooves are on the back to make finer clicking, instead of 8 of genuine plate. This IAR model click plate has lower thickness at post than that of non-IAR, mechanical ratchet models, and you need some washers to build up 1.5mm to use this clicker on older ratchet models.
$11.00 -
Avail Titanium64 Clutch return plate 2600C
Ultra light clutch return plate of ABU 2600C made of Titanium64, to remove 1.5g weight from the part. Fits to ABU 1600C, 2600C, Morrum 3600C, 5600C, 6600C, SX Hi Speed 1600C, 3600C, SX MAG 1600/3600, SX SW1600/3600. 1.9g. Genuine plate 3.4g. Replaces ABU #23188.
$18.00 -
Avail Titanium64 Drive gear plate Morrum ZX
Reinforced clutch return plate of ABU Morrum ZX made of Titanium64 for longer life. Genuine plate is made of aluminum, which is too weak to cause gearing noise soon. Fits to ABU Morrum SX Ultra MAG 1600/3600, ZX 1600/3600, SX IVCB 1600/3600, SX Ultra Mag S2. 1.8g. Genuine plate 1.1g. Replaces ABU #25802.
$18.00 -
Avail ABU Mechanical Brake Knob 55ST
ABU Ambassadeur 1000C-7500C, later than 1980 year models, except 1500C, 2500C, 3500C. Light weight 1.1g, machined ESD(extra strong duralumin, air craft grade duralumin) mechanical brake knobs. Doesn't come with copper washers inside.
-
Avail ESD Main Gear Bushing 1500C, 2500C, IAR, 25CI-MGB
Ultra light main gear shaft of ABU 1500C, 2500C made of extra strong duralumin (ESD), to remove 8g weight from the part. Fits to all ABU 1500C, 2500C, 3500C reels with IAR, instant-anti-reverse. Not fit to 1600C or 2600C thumb bar clutch models. 3.2g. Genuine brass shaft 10.2g. Clutch return posts are increased from 2 to 4, and you may return clutch faster.
$24.00 -
DRT Varial custom handle 110mm flat knob (without center nut) Big handle for big swim baits
DRT Varial handle is full machined heavy duty handles for big baits. This 110mm version has large DRT flat knobs. Handle plate is quite thick 6mm at center to offer SOLID cranking. Stiff rubber knobs are large enough to grip firmly. Accept straight star up to 27mm radius, and sway back star drags. DRT Handle center nut is not included, and please purchase at least one or you may not fit the handle to reels. You may fit DRT flat knobs to this handle. Comes with fitting plates in 7mm and 8mm, wrench for center nut. Made in Japan
-
Shimano 13/16Metanium micro-module brass gear kit
This is the brass gear kit for 13Metanium, 15Metanium DC and 16Metanium MGL reels. Gears are micro-module brass gears from Shimano. Stock main gears of these models are made of duralumin, which is not as durable as brass. You may change gear ratio to any of 6.2, 7.4 and 8.5. Comes with drive gear, pinion gear and a carbon drag washer. Drive gears and washers are from Shimano 19 Scorpion MGL. Pinion is that of Shimano 16 Metanium.
-
Avail aluminum worm shaft 2500C
This is the compatible level winder worm shaft of ABU Ambassadeur 2500C, made of aluminum alloy to remove weight. Fits to 2500C, 2501C, 2600C, 2601C, 3500C. 2.3g (genuine worm shaft 6.1g) Plastic part is made of Duracon POM to offer friction-less operation.
$24.00 -
Avail Microcast Spool ALD0928R II for Shimano 09 Aldebaran MG, Core 50MG
09Aldebaran Mg/Mg7, 10Scorpion XT1000/1001, 09Core 50MG, 10Chronarch 50E, 10Curado 50E. 4pt brake holder installed. Casts great for heavier than 3.0g 1/8oz. 0.26mm-50m/55yds 7.2g
-
Avail Microcast spools CNQ5020TR 00Conquest 50/51
Shimano Calcutta 00Conquest 50/51(year 2000-2013 model) 4 pt brake holder installed. Work with Magnet brake Avail SHSC-50A as well. Casts great for heavier than 2g. 0.205mm-45m/50yds 7.0g
-
Shimano 20 Metanium Japan spool Special selling out sale! 30% off
Fits to 2020 Metanium, 2022 Metanium Shallow, and 2023 Metanium 100 models, US version Metanium MGL B as well. Genuine spool of Japan version 20 Metanium, 20% shallower spool than US version Metanium MGL B, to improve casting performance for light rigs. It holds 0.285mm(US10lb)-100m(110yds), instead of export spool of US12lb(0.30mm)-110yds(100m). Spool depth 7mm at 2mm from side edge, instead of 9mm of MGL B. Comes with brake holder and 4 brake blocks installed. Ready to use. 14.1g Doesn't fit to 2024 Metanium DC.
Regular Price: $74.00
Special Price $51.00
-
Mike's Reel Repair Ball bearing Speed bushing 20639
Ball bearing supported spool bushing, compatible to 20639, to remove friction from spool spin. Ball bearing inner race supports spool cog side, while it is floating from spool shaft. With this bearing bushing, you may not much tighten the spool tension by cap, as bearing works against. Therefore, this is only recommended when you want to reduce minimal amount of friction from spool spin, and it is recommended to cast heavy rigs the longest. ABU4500CS, 5500CS, 6500C, 6500CS and etc, with 20639 brass bushing.
-->
$13.00 -
Itocraft Mountain Custom CX kit for Cardinal 3 Limited offered!
This is the tuning kit for Cardinal 3 and 33 to remove weight by 20g. It includes following. #1 machined side plate #2 side plate screw #3 spacer #4 bail mount screw #5 bail arm screw #6, 7 drive gear shaft sleeve #8 nut #9 protecting ring
-->$139.00 -
Avail aluminum alloy 2BB worm shaft 2500C, WS-25C-2BB-S 2025 New version!
This is the 2 ball bearing installed compatible level winder worm shaft of ABU 2500C, made by aluminum alloy to remove weight. This new version has a screw fastening the gear to the shaft, and you may change the ball bearing on the shaft. Fits to 2500C, 2501C, 2600C, 2601C, 3500C with a metal cup washer at level winder. Doesn't fit to the oldest model without it. 4.4g (genuine worm shaft 6.1g) Ball bearings removes friction in roration drastically. Plastic part is made of Duracon POM to offer friction-less operation.
$43.00 -
ValleyHill Handle Parts set Left
Set of retainer, retainer screw and nut, left L for ABU Ambassadeur 1501-6601 handles.
$6.00 -
ValleyHill 2BB cross bar 2500
2 ball bearing level winder system for ABU 2500C, 2501C, 2600C, 2601C and 3500C. Another ball bearing is inside the black plastic part. You may access to the bearing by unscrewing the screw on the gear. For 70's old 2500C, the black part should be cut to fit into the plate. Photo attached.
$35.00 -
ValleyHill 2BB cross bar 1500
2 ball bearing level winder system for ABU 1500C, 1600C. Another ball bearing is inside the black plastic part. You may access to the bearing by unscrewing the screw on the gear. For 70's reels, the black parts should be cut to fit. Photo attached.
$35.00 -
Roro Ceramic ball bearings
Super performance bearings for bait casting reels. Bearing balls are made of ceramics to remove weight. Outer and inner laces are made of stainless steel. 3 models are listed, Red BFS 1-10g, Red BFS 1-15g and Silver Regular bearings. Red BFS bearings are assembled with small bearings with red aluminum collar to remove weight from inner spinning part. Due to the small bearing installed, suitable casting weights are limited to 10g for Red BFS. Silver Regular models are simple ceramic ball bearings without red housing.
-
Avail spool cog gear 10255 black
This is the replacement of ABU #10255 and 1152469 spool cog for 2500C.
$12.00
