Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
Tuning Parts
-
Daiwa SLPW RCSB HLC1516 G1 Hyper Long Cast spool
Fits to Daiwa 15XX bait casters, including Daiwa 15Zillion TW1516. It also fits to Daiwa 2006-2009Zillion TWS100 export reels. This spool is to cast the longest for heavier than 1/2oz rigs. The brake rotor spring is 4 times stronger than regular spools, making it emitting far less brake force than regular spools. G1 duralumin material is employed. Spool dia 36mm, weight 14g, 0.330mm(JP16lb, US14lb)-100m(110yds).
-->$92.00 -
Avail Magnet brake MB-MT16K
This is the magnet brake system working with Avail MT1620RI and MT1636RI tuning spools for Shimano 16Metanium MGL. You may adjust the brake strength by the dial. To install the magnet brake, please click the product name and check how to install it to the reel. It will not work with genuine spool of the Metanium.
$22.00 -
Avail Magnet brake MB-CNQ14K
This is the magnet brake system working with Avail CNQ1024RI and tuning spools for Shimano 14Conquest 100. You may adjust the brake strength by the reel dial. To install the magnet brake, please click the product name and check how to install it to the reel. It will not work with genuine spool of the Conquest.
$21.00 -
Daiwa Spool Holder for repair SV spool, 16Steez
This is the replacement spool holder on Daiwa SV reels and SV spools sold from 2013 to 2019. It is a cam at the brake rotor base, to push out the brake rotor when it is twisted by magnetic force. Its older version in black tend to get stuck with rotor cam, or to break in time at its very thin posts. This white one is reinforced parts to replace the black spool holder. Later than 2020 year model SV reels seem to have new black cam in better design. The C clip holding rotor may be removed by 2 flat head scerw drivers. You'll surely need a tweezers to set it back, to hold a washer in position and to set the C clip in the groove. C clip and a washer are pushed by a spring, and they jump out. Please take care.
$3.00 -
Avail Carbon Cloth Drag Washer kit F2 for ABU1500C, 2500C DWASHER-CC-F2
Ultra smooth carbon cloth drag washers. Set of 2 washers. Fits :ABU 1500C, 2500C
$13.00 -
Avail Off-set frame 1500-AOF75 ABU1500C 7.5mm Red
7.5mm low sitting frame of ABU 1500C. Machined extra strong duralumin, ESD (air craft grade A7075 duralumin), side plates, reel foots and thumb bars, with titanium64 alloy screw posts and stainless steel screws. 27.5g (stock frame is 51g) Made in Japan With this frame, reel body will be set on rods by 7.5mm lower than regular frame, and you may manipulate tackle with more accuracy.
$199.00 -
$32.00 -
Daiwa SLPW RCS Power Light knob M Long, (Daiwa S)
EVA 45mm long, 27mm dia knob. Great for 2500-3000 spinning reels. 9g Fitting: Daiwa S.
$32.00 -
Avail Off-set frame 2501-AOF75 ABU2501C Left 7.5mm Black
7.5mm low sitting frame of ABU 2501C. Machined extra strong duralumin, ESD (air craft grade A7075 duralumin), side plates, reel foots and thumb bars, with titanium64 alloy screw posts and stainless steel screws. 29.3g (stock frame is 51g) Made in Japan With this frame, reel body will be set on rods by 7.5mm lower than regular frame, and you may manipulate tackle with more accuracy.
$199.00 -
Avail Off-set frame 2501-AOF75 ABU2501C Left 7.5mm Red
7.5mm low sitting frame of ABU 2501C. Machined extra strong duralumin, ESD (air craft grade A7075 duralumin), side plates, reel foots and thumb bars, with titanium64 alloy screw posts and stainless steel screws. 29.3g (stock frame is 51g) Made in Japan With this frame, reel body will be set on rods by 7.5mm lower than regular frame, and you may manipulate tackle with more accuracy.
$199.00 -
Avail Mag Brake MB-AMB1520PE
Magnet brake system for Avail 1520 and 2520 tuning spools. ABU 2500C 1500C and etc. 4 Super strong neodymium magnets. Attach the brake to the side plate. This PE model is to be used with PE braided lines, and it has less brake than regular AMB1520 brakes to cast the best.
$23.00 -
Avail Retainer 9-10 for ABU 1500C, 2500C
Handle retainer made of aluminum. For 1500C and 2500C reels, and for Avail Pure handles. Black, Gunmetal, Silver, Chrome, Blue, Skyblue, Purple, Red, Pink, Orange, Gold, Ch Gold, Brown, Green and Gold plated.
-
Avail ESD Main Gear Bushing 2501C
Ultra light main gear shaft of ABU 2501C made of extra strong duralumin (ESD), to remove 7g weight from the part. Fits to old ABU 2501C reels. 3.5g. Genuine brass shaft 10.3g. Clutch return posts are increased from 2 to 4, and you may return clutch faster.
$24.00 -
Avail Carbon Cloth Drag Washer kit A for Shimano DWASHER-CC-A
Ultra smooth carbon cloth drag washers. Set of 2 washers. Fits :Shimano 09Aldebaran MG7, 12Aldebaran BFS XG, 15Aldebaran BFS Limited, 11Scorpion DC/DC7, 10ScorpionXT1000, 09ScorpionXT1500/1500-7, 10Amenista, 14Breniuous, 01Conquest200, 14Conquest200, and etc.
$20.00 -
Avail Carbon Cloth Drag Washer kit B for Shimano DWASHER-CC-B
Ultra smooth carbon cloth drag washers. Set of 2 washers. Fits :Shimano old Bantam 10SG, 100SG, 100EX, 20SG, 200SG, BM-1, -2, -3, -4 (only for 70's). Lews Speed Spool BB-1, -2, -20.
$18.00 -
Avail Carbon Cloth Drag Washer kit C for Shimano DWASHER-CC-C
Ultra smooth carbon cloth drag washers. Set of 2 washers. Fits :Shimano 06AntaresDC7, 07Metanium MG7, 08Metanium MGDC7, 12AntaresHG, 16Scorpion70, 15ChronarchCi4+150, 14Scorpion200,15Curado200, and etc
$22.00 -
Avail Carbon Cloth Drag Washer kit D for Shimano DWASHER-CC-D
Ultra smooth carbon cloth drag washers. Set of 2 washers. Fits :Shimano 92MetaniumXT red, 97MetaniumXT silver, 97Antares, 97Scorpion1500, 00Metanium MG, 00Scorpion1000, 04Scorpion MG1000, Calcutta200XT, 01Conquest50, 04Conquest50S, 11Conquest50DC and etc
$18.00 -
Avail Carbon Cloth Drag Washer kit E for Shimano DWASHER-CC-E
Ultra smooth carbon cloth drag washers. Set of 2 washers. Fits :Shimano Antares AR, 15Aldebaran 50/50HG, 09AldebaranMG (not MG7), 01Conquest100, 10Conquest100DC, 09Conquest200DC, 14Conquest100, and etc
$20.00 -
DRT handle nut 140-150
These are the center handle nuts for DRT Varial handle 140-150 only. Please specify 7mm/8mm shaft size, Right/Left handle, and color. 7mm fits to 50-250 Shimano bait casters. 8mm fits to Daiwa/ABU and Shimano Conquest 300/400 models. Daiwa B1 SCR fits to Daiwa with hex head screw center nuts, for example Steez, Zillion TW, Tatula HD, Ryoga, Z2020
-
Smoooooth Drag Carbontex Drag kit for Shimano Curado 200DPV
Ultra smooth carbontex drag washers. Drive gear inner washer dia 33.3mm. Set of 2 washers. Fits to 05Curado 200DPV, 05Citica 200D, Cruxis200, 12Antares.
$8.00 -
Smoooooth Drag Carbontex Drag kit for Shimano Curado 200K
Ultra smooth carbontex drag washers. Drive gear inner washer dia 38.5mm. Set of 2 washers. Fits to 17Curado200K, 18Curado 150DC, 18ScorpionMGL
$9.00 -
Smoooooth Drag Carbontex Drag kit for Shimano Curado 300DSV
Ultra smooth carbontex drag washers. Drive gear inner washer dia 38.5mm. Set of 2 washers. Fits to Curado300D, 300E, 300EJ, 13Metanium, 16MetaniumMGL, 15Metanium DC
$9.00 -
Smoooooth Drag Carbontex Drag kit for Shimano Conquest 50
Ultra smooth carbontex drag washers. Drive gear inner washer dia 25.8mm. Set of 2 washers. Fits to 00ShimanoConquest50
$6.00 -
Smoooooth Drag Carbontex Drag kit for Shimano Bantam MGL
Ultra smooth carbontex drag washers. Drive gear inner washer dia 28.5mm. Set of 2 washers. Fits to 18Bantam MGL, 19Antares, Antares 70AHG
$8.00
