Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
-
- Spools, casting reels (64)
- Handles, casting reels (66)
- Handle knobs (60)
- Gears, brakes, level winders (78)
- Ball bearings, Pin remover (7)
- Spools, spinning reels (26)
- Handles, spinning reels (12)
- Frames, plates, star drag, colored parts (33)
- Drag washers (30)
Tuning Parts
-
Avail Microcast AMB5050R-BB spool Gunmetal, Old ABU 5000 5000D, BB tuning
Avail shallow spool for old ABU 5000 5000D reels in '70s, with bronze bushings. This spool is to replace the bronze bushings by ball bearings, 3x10x4 to add casting distance. Does not fit to 5000C with ball bearing or 5500C high speed reels. 0.285mm-110m
$70.00 -
Avail Microcast AMB4550R-CB spool Gunmetal ABU4600CB
Avail shallow spool for old ABU 4500CB 4600CB reels with self centering level winder system. 0.285mm-70m
$78.00 -
Avail Microcast AMB5550R spool Black, Old ABU 5500, 5500D
Avail shallow spool for old ABU 5500 and 5500D from 1976-1980. 0.285mm-110m
$70.00 -
Avail Microcast AMB5050R spool Red, Old ABU 5000 5000D, bronze bushing reel
Avail shallow spool for old ABU 5000 5000D reels in '70s, with bronze bushings. Does not fit to 5000C with ball bearing or 5500C high speed reels. 0.285mm-110m Please check details here.
$70.00 -
Livre Crank 110 Best handle for Tai-rubber with Shimano Conquest 200, 300.
110mm swept handle with machined aluminum frame and titanium knobs. Matches with sway back star drag reels, and straight star of up to 27mm radius.
Daiwa B1 SCR fits to Daiwa with hex head screw center nuts, like Steez, Zillion TW, and Tatula HD. It would take about a week to be shipped -
Livre SB 60-65 single power handle
60-65mm single power handle with counter balancer. You may change length 60 or 65 by changing the direction of center spacer. Machined aluminum frame and EP37mm dia titanium knob. Matches with sway back star drag reels, and straight star of up to 27mm radius.
Daiwa B1 SCR fits to Daiwa with hex head screw center nuts, like Steez, Zillion TW, and Tatula HD. Daiwa B2 fits to 15Saltiga 10-35 Japan models (not listed and please email for them) It would take about a week to be shipped -
Livre SB 65-70 single power handle
65-70mm single power handle with counter balancer. You may change length 65 or 70 by changing the direction of center spacer. Machined aluminum frame and EP41mm dia titanium knob. Matches with sway back star drag reels, and straight star of up to 27mm radius.
Daiwa B1 SCR fits to Daiwa with hex head screw center nuts, like Steez, Zillion TW, and Tatula HD. Daiwa B2 fits to 15Saltiga 10-35 Japan models (not listed and please email for them) It would take about a week to be shipped -
Livre SB 70-75 single power handle
70-75mm single power handle with counter balancer. You may change length 70 or 75 by changing the direction of center spacer. Machined aluminum frame and EP41mm dia titanium knob. Matches with sway back star drag reels, and straight star of up to 27mm radius.
Daiwa B1 SCR fits to Daiwa with hex head screw center nuts, like Steez, Zillion TW, and Tatula HD. Daiwa B2 fits to 15Saltiga 10-35 Japan models (not listed and please email for them) It would take about a week to be shipped -
Shimano Yumeya Aluminum Single Handle 57mm H-11
Custom handle for 22Stella 2500-C5000, 18Stella C2500-C5000, 21TwinPower XD all models, 20TwinPower2500-C5000, 19VanquishC2500-C5000, 21Ultegra2500-C5000, 21Exsence, 19Stradic2500-C5000, 20VanfordC2500-C5000, 20StradicSW4000
-->$100.00 -
Daiwa SLPW RCSB HLC1516 G1 Hyper Long Cast spool
Fits to Daiwa 15XX bait casters, including Daiwa 15Zillion TW1516. It also fits to Daiwa 2006-2009Zillion TWS100 export reels. This spool is to cast the longest for heavier than 1/2oz rigs. The brake rotor spring is 4 times stronger than regular spools, making it emitting far less brake force than regular spools. G1 duralumin material is employed. Spool dia 36mm, weight 14g, 0.330mm(JP16lb, US14lb)-100m(110yds).
-->$92.00 -
Avail Magnet brake MB-MT16K
This is the magnet brake system working with Avail MT1620RI and MT1636RI tuning spools for Shimano 16Metanium MGL. You may adjust the brake strength by the dial. To install the magnet brake, please click the product name and check how to install it to the reel. It will not work with genuine spool of the Metanium.
$22.00 -
Avail Magnet brake MB-CNQ14K
This is the magnet brake system working with Avail CNQ1024RI and tuning spools for Shimano 14Conquest 100. You may adjust the brake strength by the reel dial. To install the magnet brake, please click the product name and check how to install it to the reel. It will not work with genuine spool of the Conquest.
$21.00 -
Daiwa Spool Holder for repair SV spool, 16Steez
This is the replacement spool holder on Daiwa SV reels and SV spools sold from 2013 to 2019. It is a cam at the brake rotor base, to push out the brake rotor when it is twisted by magnetic force. Its older version in black tend to get stuck with rotor cam, or to break in time at its very thin posts. This white one is reinforced parts to replace the black spool holder. Later than 2020 year model SV reels seem to have new black cam in better design. The C clip holding rotor may be removed by 2 flat head scerw drivers. You'll surely need a tweezers to set it back, to hold a washer in position and to set the C clip in the groove. C clip and a washer are pushed by a spring, and they jump out. Please take care.
$3.00 -
Avail Carbon Cloth Drag Washer kit F2 for ABU1500C, 2500C DWASHER-CC-F2
Ultra smooth carbon cloth drag washers. Set of 2 washers. Fits :ABU 1500C, 2500C
$13.00 -
Avail Off-set frame MF7.5 ABU2500C 7.5mm Black 2024 New version with Machine-cut foot
7.5mm low sitting frame of ABU 2500C. Machined extra strong duralumin, ESD (air craft grade A7075 duralumin), side plates, reel foots and thumb bars, with titanium64 alloy screw posts and stainless steel screws. 29g (stock frame is 51g) Made in Japan With this frame, reel body will be set on rods lower by 7.5mm than regular frame, and you may manipulate tackle with more accuracy.
$215.00 -
Avail Off-set frame 1500-AOF75 ABU1500C 7.5mm Red
7.5mm low sitting frame of ABU 1500C. Machined extra strong duralumin, ESD (air craft grade A7075 duralumin), side plates, reel foots and thumb bars, with titanium64 alloy screw posts and stainless steel screws. 27.5g (stock frame is 51g) Made in Japan With this frame, reel body will be set on rods by 7.5mm lower than regular frame, and you may manipulate tackle with more accuracy.
$199.00 -
Avail Off-set frame MF7.5 ABU2500C 7.5mm Gold plated 2024 New version with Machine-cut foot
7.5mm low sitting frame of ABU 2500C. Machined extra strong duralumin, ESD (air craft grade A7075 duralumin), side plates, reel foots and thumb bars, with titanium64 alloy screw posts and stainless steel screws. 29.3g (stock frame is 51g) Made in Japan With this frame, reel body will be set on rods by 7.5mm lower than regular frame, and you may manipulate tackle with more accuracy.
$270.00 -
$32.00 -
Daiwa SLPW RCS Power Light knob M Long, (Daiwa S)
EVA 45mm long, 27mm dia knob. Great for 2500-3000 spinning reels. 9g Fitting: Daiwa S.
$32.00 -
Avail Off-set frame 2501-AOF75 ABU2501C Left 7.5mm Black
7.5mm low sitting frame of ABU 2501C. Machined extra strong duralumin, ESD (air craft grade A7075 duralumin), side plates, reel foots and thumb bars, with titanium64 alloy screw posts and stainless steel screws. 29.3g (stock frame is 51g) Made in Japan With this frame, reel body will be set on rods by 7.5mm lower than regular frame, and you may manipulate tackle with more accuracy.
$199.00 -
Avail Off-set frame 2501-AOF75 ABU2501C Left 7.5mm Red
7.5mm low sitting frame of ABU 2501C. Machined extra strong duralumin, ESD (air craft grade A7075 duralumin), side plates, reel foots and thumb bars, with titanium64 alloy screw posts and stainless steel screws. 29.3g (stock frame is 51g) Made in Japan With this frame, reel body will be set on rods by 7.5mm lower than regular frame, and you may manipulate tackle with more accuracy.
$199.00 -
Avail Mag Brake MB-AMB1520PE
Magnet brake system for Avail 1520 and 2520 tuning spools. ABU 2500C 1500C and etc. 4 Super strong neodymium magnets. Attach the brake to the side plate. This PE model is to be used with PE braided lines, and it has less brake than regular AMB1520 brakes to cast the best.
$23.00 -
Avail Retainer 9-10 for ABU 1500C, 2500C
Handle retainer made of aluminum. For 1500C and 2500C reels, and for Avail Pure handles. Black, Gunmetal, Silver, Chrome, Blue, Skyblue, Purple, Red, Pink, Orange, Gold, Ch Gold, Brown, Green and Gold plated.
-
Avail Retainer 12.5 for ABU 4000-6000
Handle retainer made of aluminum. For most Ambassadeur 4000-6000 size after 1980, with distance between the center of retainer screw and the center of main shaft at 12.5mm. Some old 60's ABU has 10mm retainers.
