Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
-
- Spools, casting reels (65)
- Handles, casting reels (69)
- Handle knobs (65)
- Gears, brakes, level winders (80)
- Ball bearings, Pin remover (7)
- Spools, spinning reels (20)
- Handles, spinning reels (12)
- Frames, plates, star drag, colored parts (29)
- Drag washers (30)
Tuning Parts
-
Avail Microcast Spool 22BTM33R, 22BTM58R 22 Bantam
22 Bantam reels. Please swap the SVS Infinity brake holder from stock spool, using SVS puller 6P listed on the product page. Ultra light weight spools, 7.8g of 33R, 8.8g of 58R instead of 12.1g of stock spool, accelerate fast with light rigs. 33R 3.3mm deep, 0.285mm-65m/72yds, fine for 5g 3/16oz or heavier 58R 5.8mm deep, 0.310mm-75m/83yds, fine for 7g 1/4oz or heavier
-
Avail Off-set handle LT 75/80/85/90mm for Shimano 7mm
Sway back, light weight LT Extra Strong Duralumin(ESD) handle frame fitting to Shimano bait casters 50-250 with swept star drags. It is very strong and super light weight. 75,80, 85, 90mm, weight 8.8g 85mm. Fits to: Shimano 50-250 reels. Accept both Daiwa S and Shimano A knobs. Light-weight ESD duralumin knob shafts. Retainer washer in the same color as handle frame and screws included. Made in Japan
-
Daiwa SLPW SV Boost dia32 22.5 12lb-80m G1 spool, Black for 24 Steez
SV Boost shallow spool for 24 Steez SV TW100 reels. This spool holds 0.285mm(JP12lb)-80m(90yds), as same as stock spool. 10g
$99.00 -
Daiwa 19Admira sway back star drag without clicking Red/Gold
Fits to Daiwa without drag clicking. Alphas series, Sol and etc.
-
Daiwa SLPW EX LT Black Spool2 3000 2025
Machined aluminum spool, with CRBB ball bearing installed inside for smooth drag. ATD-Type-L drag system for better release of lines. Long-cast ABS design, perfect line stopper, Titanium spool ring. Daiwa 18/22Exist, 19/24Certate, 21Luvias Airity, 23Airity (LT3000, PCLT3000, 3000C) Line capacity 12lb(0.285mm)-100m(110yds), PE#1.5(0.185mm)-170m(190y), 31g, 10kg drag
$90.00 -
Daiwa SLPW 25RCS Machine-cut Black Handle 50mm
Solid machine-cut handle. Fits to Daiwa reels with no hex handle shaft, Exist, Steez, Certate, Bradia, '07- Luvias, Fuego and etc 1000-4000 size. Comes with 2 CRBB 4x7x2.5 ball bearings and washers. Fits with Daiwa S knobs.
-->$65.00 -
Daiwa SLPW 25RCS Machine-cut Black Handle 55mm
Solid machine-cut handle. Fits to Daiwa reels with no hex handle shaft, Exist, Steez, Certate, Bradia, '07- Luvias, Fuego and etc 1000-4000 size. Comes with 2 CRBB 4x7x2.5 ball bearings and washers. Fits with Daiwa S knobs.
$69.00 -
Daiwa SLPW Spinning handle cap, Black 2025
Solid machine-cut handle cap. Fits to Daiwa reels 18/22Exist, 19/24Certate, 21Luvias Airity, 23Airity, and etc 1000-4000 size.
$25.00 -
Shimano 25 Aldebaran DC 30 spool
Shimano 25 Aldebaran DC 30/31 spare spool, ready to use. Line capacity 0.235mm(US6lb)-100m(110yds)
$110.00 -
Daiwa SLPW RCSB Carbon Light Crank Handle 80, 85, 90, 95mm Made of TORAYCAT1100G carbon fibers
The latest high-end carbon material, TORAYCAT1100G employed handle with light weight air-craft grade Extra Strong Duralumin, ESD, fixtures to remove weight. Fits to reels with sway back drag wheel. Daiwa Steez, Zillion, Alphas, Tatula and etc. Comes with 4 ball bearings, 2 retainers for 10mm and 12mm hex, and a screw. Accepts Daiwa S knobs.
-
Avail Microcast AMB5550R spool Red
Avail shallow spool for old ABU 5500 and 5500D from 1976-1980. 0.285mm-110m
$80.00 -
Avail Microcast AMB5530R-OA spool Black
Avail shallow spool for old ABU 5500C reels in 80's from Mamiya in Japan, with sharp edge design side plates and fixed spool shaft on spool. Also fits to 80's 5001C with flat side plates. Does not fit to 5500C sold in 70's. Difference is at the genuine spool, and 70's spool has silver plates just under brake holder pin, but 80's doesn't have the silver plates. 0.285mm-70m
$80.00 -
Shimano 90mm Power Handle kit, Gunmetal, Large knobs (22BantXG)
Power gripping 90mm swept, aluminum frame, large knob handle. Fits to Shimano bait casters 50-250 with swept star drag. Comes with a retainer, hooded nut R and L, and a retainer screw.
$67.00 -
Shimano 90mm Power Handle kit, Black, Large knobs (21AntaresDCXG)
Power gripping 90mm swept, aluminum frame, large knob handle. Fits to Shimano bait casters 50-250 with swept star drag. Comes with a retainer, hooded nut R and a screw.
$67.00 -
Shimano 84mm Regular Handle frame, Black (22SLXDCXT)
84mm swept, aluminum handle frame. Fits to Shimano bait casters 50-250 with swept star drag. Comes without any other parts.
$15.00 -
DRT Varial custom handle Black x White 87, 95, 100mm Limited offer!
DRT Varial handles are full machined heavy duty handles for big baits. Handle plate is quite thick 6mm at center to offer solid cranking. EVA Calform rubber knobs are large enough to grip firmly. Accept straight star up to 27mm radius, and sway back star drags. Center nut is not included, and please choose one from another page bellow, or you may not fit this handle to a reel. Comes with fitting plates in 7mm and 8mm, a wrench for center nut. Made in Japan
-
Shimano 84mm handle kit, straight frame, EVA knobs, 11SaltyOnePG
Shimano replacement handle with straight frame. Fits to reels with straight (not sway-back style) star drags. 84mm. Main shaft 7mm, fits to Shimano bait casting reels 50-250. Comes with R handle nut, retainer and screw.
$44.00 -
Shimano knob L, Shimano A (22BantXG)
Large knob for Shimano bait casters 70-200 size, and spinning 1000-C3000 size. 6g Fitting: Shimano A
$13.00 -
Shimano knob T small, Shimano A (20TPC3000)
Small T knob for Shimano spinning 2500-4000 size. 42mm wide, 5g Fitting: Shimano A
$17.00 -
Shimano knob T Large, Shimano A (20TP4000)
Large T knob for Shimano spinning 2500-4000 size. 46mm wide, 7g Fitting: Shimano A
$18.00 -
Daiwa SLPW 25RCS Machine-cut Black Handle 45mm
Solid machine-cut handle. Fits to Daiwa reels with no hex handle shaft, Exist, Steez, Certate, Bradia, '07- Luvias, Fuego and etc 1000-4000 size. Comes with 2 CRBB 4x7x2.5 ball bearings and washers. Fits with Daiwa S knobs.
$65.00 -
Daiwa SLPW 25RCS Machine-cut Black Handle 60mm
Solid machine-cut handle. Fits to Daiwa reels with no hex handle shaft, Exist, Steez, Certate, Bradia, '07- Luvias, Fuego and etc 1000-4000 size. Comes with 2 CRBB 4x7x2.5 ball bearings and washers. Fits with Daiwa S knobs.
$69.00 -
Daiwa SLPW 25RCS Machine-cut Black Handle 65mm
Solid machine-cut handle. Fits to Daiwa reels with no hex handle shaft, Exist, Steez, Certate, Bradia, '07- Luvias, Fuego and etc 1000-4000 size. Comes with 2 CRBB 4x7x2.5 ball bearings and washers. Fits with Daiwa S knobs.
$69.00 -
Daiwa SLP Works, RCSB CT SV PE 700 G1 spool, Black 2025
Daiwa CT70/700 reels, like Steez CT TW700, Alphas CT70, and Millionaire CT70. Flat bottom, ultra light-weight 8g, 30mm dia spool, same as stock spool of reel above. This PE special spool is the best for PE braided lines. G1 drage Extra strong duralumin spool. Casts great for heavier than 3g 1/8oz. PE#0.8(0.165mm)--100m(110yds)
$90.00
