Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
- Category
-
- Spools, casting reels (69)
- Handles, casting reels (65)
- Handle knobs (59)
- Gears, brakes, level winders (80)
- Ball bearings, Pin remover (7)
- Spools, spinning reels (26)
- Handles, spinning reels (12)
- Frames, plates, star drag, colored parts (29)
- Drag washers (30)
Tuning Parts
-
Avail spool cog gear 10255 red
This is the replacement of ABU #10255 and 1152469 spool cog for 2500C.
$12.00 -
Avail spool cog gear 10255 silver
This is the replacement of ABU #10255 and 1152469 spool cog for 2500C.
$12.00 -
Avail Microcast SXMG1618R spool for ABU Morrum SX1600C MAG
ABU Morrum SX1600C MAG Super light weight 7.0g (13g genuine spool), extra strong duralumin spool PE#0.6(0.15mm)-80m. Casts great for heavier than 3.5gram, 1/8oz
$87.00 -
Avail Microcast SXUM1618R spool for ABU Morrum SX1600C ULTRAMAG
ABU Morrum SX1600C ULTRAMAG Super light weight 7.2g (14.5g genuine spool), extra strong duralumin spool PE#0.6(0.15mm)-80m. Casts great for heavier than 3.5gram, 1/8oz
$87.00 -
DRT x WCZ Varial custom handle 95mm, 100mm (Working Class Zero special color Matt Brown)
This WCZ special version has Matt Brown color frame and flat knobs. DRT Varial handles are full machined heavy duty handles for big baits. Handle plate is quite thick 6mm at center to offer SOLID cranking. Stiff rubber knobs are large enough to grip firmly. Accept straight star up to 27mm radius, and sway back star drags. Center nut is included, and please choose appropriate models. Comes with fitting plates in 7mm and 8mm, a wrench for center nut. Made in Japan
-
Avail Microcast Spool 19ANT41R
Fits to Shimano 19Antares reels. 4.1mm shallow spool weighs at 7.5g, instead of 10.9g of stock spool. The ultra light spool accelerate fast with light rigs of 3.5g well. You will swap the SVS brake holder from stock spool using Avail SVS puller Infinity. Or, use with magnet brake MB-19ANT listed below of the product page.
$87.00 -
Avail Magnet brake MB-19ANT
This is the magnet brake system working with Avail 19ANT41R spools for Shimano 19 Antares. You may adjust the brake strength by the dial of reel. To install the magnet brake, please check here How to install magnet brake. It will not work with genuine spool of Antares.
$21.00 -
Avail Microcast Spool 22BTM33R, 22BTM58R 22 Bantam
22 Bantam reels. Please swap the SVS Infinity brake holder from stock spool, using SVS puller 6P listed on the product page. Ultra light weight spools, 7.8g of 33R, 8.8g of 58R instead of 12.1g of stock spool, accelerate fast with light rigs. 33R 3.3mm deep, 0.285mm-65m/72yds, fine for 5g 3/16oz or heavier 58R 5.8mm deep, 0.310mm-75m/83yds, fine for 7g 1/4oz or heavier
-
Avail 2500C Kaiketsu Porori 4P Brake 4p_brake_25c_kkp
4pt brake for 1500C, 2500C genuine spools, and Avail tuning spools for those reels. Blocks are self locking and you may adjust the number of blocks engaged easy. Blocks will not fall off.
$23.00 -
Avail Off-set handle LT 75/80/85/90mm for Shimano 7mm
Sway back, light weight LT Extra Strong Duralumin(ESD) handle frame fitting to Shimano bait casters 50-250 with swept star drags. It is very strong and super light weight. 75,80, 85, 90mm, weight 8.8g 85mm. Fits to: Shimano 50-250 reels. Accept both Daiwa S and Shimano A knobs. Light-weight ESD duralumin knob shafts. Retainer washer in the same color as handle frame and screws included. Made in Japan
-
Daiwa SLPW SV Boost dia32 22.5 12lb-80m G1 spool, Black for 24 Steez
SV Boost shallow spool for 24 Steez SV TW100 reels. This spool holds 0.285mm(JP12lb)-80m(90yds), as same as stock spool. 10g
$99.00 -
Daiwa 19Admira sway back star drag without clicking Red/Gold
Fits to Daiwa without drag clicking. Alphas series, Sol and etc.
-
Daiwa SLPW EX LT Black Spool2 3000 2025
Machined aluminum spool, with CRBB ball bearing installed inside for smooth drag. ATD-Type-L drag system for better release of lines. Long-cast ABS design, perfect line stopper, Titanium spool ring. Daiwa 18/22Exist, 19/24Certate, 21Luvias Airity, 23Airity (LT3000, PCLT3000, 3000C) Line capacity 12lb(0.285mm)-100m(110yds), PE#1.5(0.185mm)-170m(190y), 31g, 10kg drag
$94.00 -
Daiwa SLPW 25RCS Machine-cut Black Handle 50mm
Solid machine-cut handle. Fits to Daiwa reels with no hex handle shaft, Exist, Steez, Certate, Bradia, '07- Luvias, Fuego and etc 1000-4000 size. Comes with 2 CRBB 4x7x2.5 ball bearings and washers. Fits with Daiwa S knobs.
-->$65.00 -
Daiwa SLPW 25RCS Machine-cut Black Handle 55mm
Solid machine-cut handle. Fits to Daiwa reels with no hex handle shaft, Exist, Steez, Certate, Bradia, '07- Luvias, Fuego and etc 1000-4000 size. Comes with 2 CRBB 4x7x2.5 ball bearings and washers. Fits with Daiwa S knobs.
$69.00 -
Daiwa SLPW SLPW Spinning handle cap, Black 2025
Solid machine-cut handle cap. Fits to Daiwa reels 18/22Exist, 19/24Certate, 21Luvias Airity, 23Airity, and etc 1000-4000 size.
-->$25.00 -
Shimano 25 Aldebaran DC 30 spool
Shimano 25 Aldebaran DC 30/31 spare spool, ready to use. Line capacity 0.235mm(US6lb)-100m(110yds)
$110.00 -
Daiwa SLPW RCSB Carbon Light Crank Handle 80, 85, 90, 95mm Made of TORAYCAT1100G carbon fibers
The latest high-end carbon material, TORAYCAT1100G employed handle with light weight air-craft grade Extra Strong Duralumin, ESD, fixtures to remove weight. Fits to reels with sway back drag wheel. Daiwa Steez, Zillion, Alphas, Tatula and etc. Comes with 4 ball bearings, 2 retainers for 10mm and 12mm hex, and a screw. Accepts Daiwa S knobs.
-
Avail Microcast AMB5550R spool Red, Old ABU 5500, 5500D
Avail shallow spool for old ABU 5500 and 5500D from 1976-1980. 0.285mm-110m
$70.00 -
Avail Microcast AMB5530R spool Black, Old ABU 5500, 5500D
Avail super shallow spool for old ABU 5500 and 5500D from 1976-1980. 0.285mm-70m
$70.00 -
Shimano 90mm Power Handle kit, Gunmetal, Large knobs (22BantXG)
Power gripping 90mm swept, aluminum frame, large knob handle. Fits to Shimano bait casters 50-250 with swept star drag. Comes with a retainer, hooded nut R and L, and a retainer screw.
$67.00 -
Shimano 90mm Power Handle kit, Black, Large knobs (21AntaresDCXG)
Power gripping 90mm swept, aluminum frame, large knob handle. Fits to Shimano bait casters 50-250 with swept star drag. Comes with a retainer, hooded nut R and a screw.
$67.00 -
Shimano 84mm Regular Handle frame, Black (22SLXDCXT)
84mm swept, aluminum handle frame. Fits to Shimano bait casters 50-250 with swept star drag. Comes without any other parts.
$15.00 -
DRT Varial custom handle Black x White 87, 95, 100mm Limited offer!
DRT Varial handles are full machined heavy duty handles for big baits. Handle plate is quite thick 6mm at center to offer solid cranking. EVA Calform rubber knobs are large enough to grip firmly. Accept straight star up to 27mm radius, and sway back star drags. Center nut is not included, and please choose one from another page bellow, or you may not fit this handle to a reel. Comes with fitting plates in 7mm and 8mm, a wrench for center nut. Made in Japan
