Cart - 0 Item

You have no items in your shopping cart.

High-quality fishing tackle directly from Japan to worldwide. All prices are in US$.
Daiwa
Compare Products

You have no items to compare.

Daiwa

Tuning spools for Daiwa

Tuning spools 1000, 1012, 1016 fits to reel with 10XX numbers, like 1000, 1012, 1016, 1025 and etc. These spools also fits to T3 series. For other models, please find spools fitting to respective reels.
  • Daiwa Spool Holder for repair SV spool

    This is the replacement spool holder on Daiwa SV spools, in white. It is a cam at the rotor base, to push out roter when it is twisted by magnetic force. Its older version in black tend to get stuck with rotor, or to break in time. This white one is reinforced parts to replace the black spool holder. The C clip holding rotor may be removed by 2 flat head scerw drivers. You'll surely need a tweezers to set it back, to hold a washer in position and to set the C clip in the groove. C clip and a washer are pushed by a spring, and they jump out. Please take care.

    $3.00

    Out of stock

  • Spool bearing installation service

    This is the fee to install bearings onto spools. This service is only for customers who purchase bearing and spool together. Bearings on short shaft model, like Daiwa, Revo (except Gen 1 S and ST) requires to use pin remover, and this service is to do it for you. For long spool shaft reels like Shimanos, you don't have to replace the bearing on the shaft because it is not related to casting performances. It is to support shaft in case very large load is applied. For those reels please replace the two bearings at the both ends of spool shafts.

    $5.00
    Add to Wishlist

  • Daiwa Millionaire 103 long pinion shaft

    Daiwa Millionaire 103 reels with Magforce brake, like CV-X/Z103/105, SW103, Barstock 103, Ringa SSS, Bay CastingSP103, Monoblock and etc. With this long pinion shaft inside cast control cap, you may install the tuning spools for Steez103/105 to your Millionaire 103 reels.

    $3.00
    Add to Wishlist

  • Daiwa Zillion HLC spool spring

    Fits to Daiwa 08Zillion, 09Zillion PE special and etc with Magforce Z brake system. This is the strong rotor spring employed to 09Zillion HLC hyper long cast reel spools. It is 4 times stronger than stock 08Zillion spools. With this HLC spring, spool will spin at twice the speed as stock spools at maximum, to cast 80-100yds with 1/2-1oz rigs.

    $2.00

    Out of stock

  • Daiwa 07TD-Zillion HLC Spool

    Daiwa 06TD-Zillion, 08/12TD-Zillion PE Special, 04TD-Z 100 US Trail, 05TD-Z BBS
    This is the spool on 07TD-Zillion HLC Hyper Long Cast models, to cast heavier than 1/2oz rigs the longest. Its brake spring is 4 times stronger than regular Zillion spools, to emit far less brake than regular spools, allowing heavy rigs to cast 30% more for around 3/4-1oz plastic worm rigs. Spool body (rotating part) is machined to reduce weight by 30%. Weight 15.1g including bearings, 16lb(0.330mm) -110yds

    $82.00
    Add to Wishlist

  • Daiwa Zillion PE special 7.9R Spool Red

    Daiwa 08TD-Zillion, 09/12TD-Zillion PE Special, 04TD-Z100 US Trail, 05TD-Z BBS, 21 Steez A HLC
    Flat bottom shallow spool to improve casting distance by about 20%. Super Light weight 13.8g. 0.310mm(US12lb)-100m(110yds). Magforce-Z brake. This is the spool to improve 09Zillion reels in casting light rigs of 1/4-3/8oz. Zillion stock spool weight 21g.

    $103.00
    Add to Wishlist

  • Daiwa SLPW RCSB HLC1514 G1 Hyper Long Cast spool

    Fits to Daiwa 15XX bait casters, including Daiwa 15Zillion TW1516. It also fits to Daiwa Zillion TWS100 export reels. This spool is to cast the longest for heavier than 1/2oz rigs. The brake rotor spring is 4 times stronger than regular spools, making it emitting far less brake force than regular spools. G1 duralumin material is employed. Spool dia 36mm, weight 14g, 0.310mm(US12lb)-100m(110yds).

    -->
    $86.00

    Out of stock

  • Daiwa SLPW RCSB HLC1516 G1 Hyper Long Cast spool

    Fits to Daiwa 15XX bait casters, including Daiwa 15Zillion TW1516. It also fits to Daiwa Zillion TWS100 export reels. This spool is to cast the longest for heavier than 1/2oz rigs. The brake rotor spring is 4 times stronger than regular spools, making it emitting far less brake force than regular spools. G1 duralumin material is employed. Spool dia 36mm, weight 14g, 0.330mm(JP16lb, US14lb)-100m(110yds).

    $92.00
    Add to Wishlist

  • Daiwa SLPW, RCSB HD 1520 G1 spool

    G1 (air craft grade) duralumin heavy duty spool for Daiwa 1500 sized reels. This HD spool has fixed brake rotor to emit stable brake force in casting. The brake is great for bulky rigs like swim baits, large deep divers and spinner baits. LIne capacity JP20lb(0.370mm, US14lb)-100m(110yds), 15g, 36mm dia.

    $110.00
    Add to Wishlist

  • Daiwa genuine, 1520 G1 Magforce-Z spool (Ryoga1520H #21)

    G1 (air craft grade) duralumin spool for Daiwa 1500 sized reels. This genuine spool has moving brake rotor to automatically adjust brake force in casting. The brake system is great to prevent backlash for wide range of rigs. LIne capacity JP20lb(0.370mm, US14lb)-100m(110yds), g, 36mm dia.

    $100.00
    Add to Wishlist

  • Daiwa SLP Works RCSB 1012 SV spools

    Daiwa T3(all models), Zillion1016TW, Steez1016TW, Ryoga1025, Pluton1025. Flat bottom, super light-weight spool to improve casting performance for wide range or weight. Extra strong duralumin spool. MAGFORCE-AIR brake. Casts great for heavier than 3g 1/8oz. 0.310mm(US10lb)-70m(80yds)


    Add to Wishlist
  • Daiwa RCSB 1012 Shallow spool

    Daiwa T3, T3 MX, T3 ballistic, RCS 1016, 1025 reels (Ryoga, Pluton). Flat bottom, super light-weight spool to improve casting performance for wide range or weight. MAGFORCE-Z brake. Casts great for heavier than 7g. 0.285mm(US10lb)-100m(110yds), 14g

    $80.00
    Add to Wishlist

  • Daiwa SLPW RCSB CT SV 700S G1 Black spool  2020

    Super shallow, light weight spool to improve casting performance for light rigs. Fits to Daiwa Steez CT, Alphas CT, Millionaire CT. LIne capacity 0.265mm(US8lb, JP10LB)-40m(45yds), 9g

    $83.00
    Add to Wishlist

  • Daiwa SLP Works, RCSB CT SV 700 G1 spools

    Daiwa CT70/700 reels, like Steez CT TW700, Alphas CT70, and Millionaire CT70. Flat bottom, ultra light-weight 8g, 30mm dia spool, same as stock spool of reel above. G1 drage Extra strong duralumin spool. Casts great for heavier than 3g 1/8oz. 0.310mm(US12lb)-60m(70yds)


    Add to Wishlist
  • Daiwa SLP Works, RCSB 1012/1016 G1 Magforce-Z spools  to add casting distance

    Daiwa T3(all models), Zillion1016TW, Steez1016TW, Steez A1016, Ryoga1025, Pluton1025 and etc. Flat bottom, light-weight 13g spool to add casting distance by the help of Magforce-Z brake system especially for light weight rigs 7g-14g 1/4-1/2oz. G1 drage Extra strong duralumin spool. MAGFORCE-Z brake. Casts great for heavier than 7g 1/4oz. 1012 G1 spool 0.285mm(US10lb)-100m(110yds) 1016 G1 spool 0.330mm(US12lb)-100m(110yds)


    Add to Wishlist
  • Daiwa SLP Works, RCSB 1012/1016 SV Spool G1  lightest spool

    G1 grade Extra strong duralumin spool with SV MAGFORCE-AIR brake. You may cast from 3g 1/8oz to heavy rigs with this spool without backlash easily. Flat bottom, ultra light-weight 9g spool to improve casting performance especially for ultra light weight rigs 3g-7g 1/8-1/4oz. Fits to Daiwa T3(all models), all 10XX sized Daiwa bait casters like Zillion1016TW, Steez1016TW, Steez A1016, Ryoga1025, Pluton1025 and etc. 1012 G1 spool 0.310mm(US10lb)-70m(80yds) 1016 G1 spool 0.330mm(US12lb)-100m(110yds)


    Add to Wishlist
  • Roro BFS Spool DIY AX22-MG Black, Magnesium spool 20 Steez Air  Spacial spool for Daiwa Air TW reels, 2024 new

    You may cast 0.6g. Made of Magnesium-titanium alloy! Ultra light weight shallow tuning spool, 3mm deep spool for Daiwa 19 Steez Air TW, 20Alphas Air TW, 21Gekkabijin Air TW, 22Silver Creek Air TW, 2023 Millionaire Stream Custom Air. 28mm dia. 2.92g (measured without ball bearing). Fixed brake rotor offers stable brake. SIC ball installed at the end of shaft to offer stable brake. Brake is about 35% less than that of stock spool.

    $159.00

    Out of stock

  • Roro BFS Spool DIY ATX27, standard, black, T3 Air, 16Alpahs Air, SS Air  Re-stocked!

    You may cast 2g. Ultra light weight 2.25mm deep ultra shallow tuning spool for Daiwa T3 Air, 16Alphas Air, SS Air, and 18SV Light LTD. 32mm dia, 4.8g(measured without ball bearing) PE#0.8(0.16mm)-100m Fixed brake rotor offer stable brake. NOT fitting to 18 Alphas Air Stream Custom, or 20 Alphas Air TW.

    $92.00
    Add to Wishlist

  • Roro BFS Spool DIY AX27, standard, Gold, Daiwa Alphas 103

    You may cast 3g. 3.0mm deep spool. Ultra light weight shallow tuning spool for Daiwa Alphas 103/105, Daiwa Sol and Megabass Zonda, Lauda, Alphas SV 105, Alphas KTF, Alphas Ito 103. 33mm dia. 5.35g(measured without ball bearing) PE#1.0(0.18mm)-100m Not for Alphas Air, Alphas CT or 21/22 Alphas SV TW 800.

    $88.00
    Add to Wishlist

  • Roro BFS Spool DIY X27, Gold, Daiwa TW1000, TD-Z

    You may cast 3g. Ultra light weight 3.5mm deep super shallow tuning spool for Daiwa TW 1000 series reels, and TD-Z reels. Steez SV TW, Zillion SV TW, 17Steez A, Steez 100, Zillion, T3 except T3 Air, Ryoga 1016, Pluton 1016, Zillion 1016, TD-Z103, SS SV and etc. 34mm dia. 4.6g(measured without ball bearing) SIC ball is installed at the end of titanium shaft to remove friction. Fixed brake rotor offer stable brake. PE#1.0(0.18mm)-120m

    $87.00

    Out of stock

  • Daiwa SLPW RCSB MAG-Z Boost 1000 G1 spool, Silver  2022 Model

    This spool extends casting distance by reducing brake force at the later half in casting. Fits to Daiwa 1000, 1012, 1025 and 1016 reels, T3(all models) and etc. Flat bottom, light-weight 15g spool to improve casting performance especially for relatively heavy rigs of 10g-28g 3/8-1oz. G1 grade duralumin. In MAGFORCE-Z Boost brake, rotor will pop out far only at the beginning of casting to prevent backlash, and then it retracts to the middle to reduce brake to add casting distance. The second half spring is 4 times stronger than the first half to do the trick. Compared to SV Boost spools, this Magforce-Z Boost spools have more weight, and it is more suitable for heavier rigs. You may cast long distance without fear of backlash with this spool. Casts great for heavier than 7g 1/4oz. 0.330mm(US12lb)-100m(110yds)

    $96.00
    Add to Wishlist

  • Roro BFS Spool DIY AX22, SIC Titanium, Daiwa 20 Alphas Air

    You may cast 2g. Ultra light weight shallow tuning spool, 3mm deep spool for SLPW 23Millionaire Air, Daiwa 20Alphas Air TW, 21Gekkabijin Air TW, 22Silver Creek Air TW, 20Alphas Air, 19 Steez Air TW. 28mm dia. 3.8g (measured without ball bearing). Spool shaft end has SIC ball to spin fast. Shaft is made of titanium. Fixed brake rotor offer stable brake. Brake is about 35% less than that of stock spool.


    Add to Wishlist
  • Roro BFS Spool DIY RX24, SIC Titanium, Daiwa CT

    You may cast 3g. Ultra light weight super shallow, 3mm deep, tuning spool for Daiwa 19Alphas CT700, 19Steez CT700 and 19Millionaire CT700. Spool shaft end has SIC ball to spin fast. Shaft is made of titanium. 30mm dia. 4.3g(measured with ball bearing) Fixed brake rotor offer stable brake.


    Add to Wishlist
  • Roro BFS Spool DIY AX23 Black, Daiwa Alphas SV TW

    You may cast 3g. Ultra light weight 4.5mm deep shallow tuning spool for Daiwa 21/22Alphas SV TW 800/800S series reels. Titanium shaft. 32mm dia. 4.1g (measured without bearing) Fixed brake rotor offer stable brake.

    $80.00
    Add to Wishlist

Set Ascending Direction
  1. 1
  2. 2