Cart - 0 Item
You have no items in your shopping cart.
You have no items to compare.
ABU
Tuning Spools for ABU reels
With these shallow spools, the total weight of spool with line is significantly reduced, and they accelerate easily with light rigs without effort. This is why shallow tuning spools are chosen for finesse tactics. You'll be amazed how the tuned reel cast. In choosing shallow spools, please consider the balance between line capacity and casting ability for light rigs. Spool weight and approx least casting weight: 12g spool 5g, 10g spool 4g , 9g spool 3.5g, 8g spool 3.0g, 7g spool 2.5g, 6g spool 2.0g. Please read this article to upgrade ABU classic reels
For ABU Revo reels, please take a look at this fitting chart. When you have a question, please Email Jun
-
Spool bearing installation service
This is the fee to install bearings onto spools. This service is only for customers who purchase bearing and spool together. Bearings on short shaft model, like Daiwa, Revo (except Gen 1 S and ST) requires to use pin remover, and this service is to do it for you. For long spool shaft reels like Shimanos, you don't have to replace the bearing on the shaft because it is not related to casting performances. It is to support shaft in case very large load is applied. For those reels please replace the two bearings at the both ends of spool shafts.
$5.00 -
ABU Small Parts Kit for AMB spools
Small parts kit for Avail AMB spools UC4550, 5550, 6550. Comes with 2 ball bearings, 23403 cog, washer and 1116727 6pt brake unit.
$24.00 -
Avail Microcast AMB6550UC finesse spool
ABU 6500C, 6600C Ultra Cast model Super light weight 17.8g, extra strong duralumin spool. small parts sold separately. 0.31mm-130yds/120m Casts great for heavier than 8g. Please use the small parts from stock spool or sold belowseparately.
-
Avail Microcast AMB5550UC2 shallow spool
ABU 5500C, 5600C Ultra Cast model (spool shaft separates from spool body) Super light weight shallow spool to upgrade casting performance. 12.2g, instead of 17.1g of stock spool. Extra strong duralumin spool. 5mm deep, 0.31mm(US12lb)-110yds/100m Casts great for heavier than 5g. Now this new version has cog pert machined separately to hold spool gear tight. Please use the small parts (2 ball bearings, a washer, brake holder and white spool gear) from stock spool, or purchased additionally.
-
Avail Microcast AMB4550UC2 finesse spool
ABU 4500C, 4600C Ultra Cast model (spool shaft separates from spool body). Not fitting to low profile Ultra Mag in 80's like XLT. Super light weight 9.8g, instead of 15.1g of stock spool. Extra strong duralumin spool. 0.31mm(US12lb)-60m/70yds Please use the small parts (2 ball bearings, a washer, brake holder and white spool gear) from stock spool or sold below separately. Casts great from heavier than 4g
-
Avail Microcast AMB5550R spool Black, Old ABU 5500, 5500D
Avail shallow spool for old ABU 5500 and 5500D from 1976-1980. 0.285mm-110m
$78.00 -
Avail Microcast AMB5550R-OA spool Black, Old ABU 5500C 80's Mamiya
Avail shallow spool for old ABU 5500C reels in 80's with flat side plates and fixed spool shaft on spool. Does not fit to 5500C sold in 70's. Difference is at the genuine spool, and 70's spool has silver plates just under brake holder pin, but 80's doesn't have the silver plates. 0.285mm-110m
$78.00 -
Avail Microcast AMB5550C70'S spool Silver, Old ABU 5500C 70's
Avail super shallow spool for old ABU 5500C reels in 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5500C sold in 80's or later. Difference is at the genuine spool, and 70's spool has silver plates on both sides, but 80's doesn't have them and it is black spool wall. 0.285mm-110m
$78.00 -
Avail Microcast AMB5550C70'S spool Black, Old ABU 5500C 70's
Avail shallow spool for old ABU 5500C reels in 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5500C sold in 80's or later. Difference is at the genuine spool, and 70's spool has silver plates on both sides, but 80's doesn't have them and it is black spool wall. 0.285mm-110m
$78.00 -
Avail Microcast AMB5550C70'S spool Red, Old ABU 5500C 70's
Avail shallow spool for old ABU 5500C reels in 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5500C sold in 80's or later. Difference is at the genuine spool, and 70's spool has silver plates on both sides, but 80's doesn't have them and it is black spool wall. 0.285mm-110m
$78.00 -
Avail Microcast AMB5530C70'S spool Black, Old ABU 5500C 70's
Avail super shallow spool for old ABU 5500C reels in 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5500C sold in 80's or later. Difference is at the genuine spool, and 70's spool has silver plates on both sides, but 80's doesn't have them and it is black spool wall. 0.285mm-75m
$78.00 -
Avail Microcast AMB5050R-C spool Black, Old ABU 5000C 5001C
Avail shallow spool for old ABU 5000C 5001C reels in 60's and 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5000C with palming cup, 5000C with a little popping gear plate, 5000 with bronz bushing or 5500C high speed reels. 0.285mm-110m
$78.00 -
Avail Microcast AMB5050R-C spool Silver, Old ABU 5000C 5001C
Avail shallow spool for old ABU 5000C 5001C reels in 60's and 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5000C with palming cup, 5000C with a little popping gear plate, 5000 with bronz bushing or 5500C high speed reels. 0.285mm-110m
$78.00 -
Avail Microcast AMB5050R-C spool Red, Old ABU 5000C 5001C
Avail shallow spool for old ABU 5000C 5001C reels in 60's and 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5000C with palming cup, 5000C with a little popping gear plate, 5000 with bronz bushing or 5500C high speed reels. 0.285mm-110m
$98.00 -
Avail Microcast AMB5030R-C spool Black, Old ABU 5000C 5001C
Avail super shallow spool for old ABU 5000C 5001C reels in 60's and 70's with flat side plates and fixed spool shaft on spool. Does not fit to 5000C with palming cup, 5000C with a little popping gear plate, 5000 with bronz bushing or 5500C high speed reels. 0.285mm-75m
$78.00 -
Avail Microcast AMB5050R spool Silver, Old ABU 5000 5000D bronze bushing reel
Avail shallow spool for old ABU 5000 5000D reels in '70s, with bronze bushings. Does not fit to 5000C with ball bearing or 5500C high speed reels. 0.285mm-110m
$78.00 -
Avail Microcast AMB5050R spool Black, Old ABU 5000 5000D bronze bushing reel
Avail shallow spool for old ABU 5000 5000D reels in '70s, with bronze bushings. Does not fit to 5000C with ball bearing or 5500C high speed reels. 0.285mm-110m Please check details here.
$78.00 -
Avail Microcast AMB5050R spool Red, Old ABU 5000 5000D, bronze bushing reel
Avail shallow spool for old ABU 5000 5000D reels in '70s, with bronze bushings. Does not fit to 5000C with ball bearing or 5500C high speed reels. 0.285mm-110m Please check details here.
$78.00 -
Avail Microcast AMB1050R spool Gunmetal + 4pt brake
Avail shallow spool for ABU 1000 1000C reels. 0.285mm(US10lb, JP12lb)-70m. Installed with the 4pt brake holder on the photo.
$92.00 -
Avail Microcast AMB4550R-EF spool, for Old ABU 4500C 4600C
Avail shallow spool for old ABU 4500C, 4600C reels sold in 70's. 1976-78 4500C, and 1978 4600C with red thumb bars. Does not fit to other 4500 with bronze bushing reels, 4600CB or replica 4500C models sold later. 0.285mm-70m
$98.00 -
Avail Microcast AMB3520R finesse spool with 4pt brake
ABU Ambassadeur 3500C Super light weight 6.1g, extra strong duralumin spool 0.205mm(jp6lb)-55m 4pt brake holder installed
-
Avail Microcast AMB3540R finesse spool with 4pt brake
ABU Ambassadeur 3500C Super light weight 6.5g, extra strong duralumin spool 0.260mm-70m/80yds 4pt brake holder installed
-
Avail Microcast AMB2560R finesse Deep spool with 4pt brake Won 2012Casting World Championship
ABU 2500C, 2501C, 2600C, 2601C Super light weight 5.7g(except brake holder), ESD extra strong duralumin spool 0.285mm-90yds/80m Casts great from 7g 4pt brake holder installed
-
Avail Microcast AMB2540R finesse spool+ 4pt brake
ABU 2500C, 2501C, 2600C, 2601C Super light weight 5.8g(except brake holder), ESD extra strong duralumin Casts great for heavier than 5g 0.26mm(JP10lb nylon)-80yds/70m You may use AMB1540 Mag Brake with this spool as well.
